basIP CR-02BD User manual

USER MANUAL
NETWORK READER WITH CONTROLLER
CR-02BD

CR-02BD
Using an external network proximity card reader BAS-IP CR-02BD, you can
read contactless cards, key fobs, as well as mobile identifiers from mobile
devices and open the connected lock.
External contactless card and key fob reader with built-in controller and UKEY
technology support: Mifare® Plus and Mifare® Classic, Bluetooth, NFC card,
key fob, and mobile ID reader.
Full User Manual
Appearance
Device description wiki.bas-ip.com
Opens door indicator.
Card reader.
Loudspeaker.
Power indicator.
1
2
3
4
-
-
-
-
READER WITH CONTROLLER
Main features
• Standard of cards and key fobs used:
UKEY (EM-Marin / MIFARE® / NFC / Bluetooth).
• Integration with ACS: WIEGAND-26, 32, 34, 37, 40,
42, 56, 58, 64 bit output.
• Protection class: IP65.
• IK-Code: IK07.
• Working temperature: -40 — +65 °С.
• Power consumption: 6,5 W, in standby — 2,5 W.
• Power supply: +12 V DC, PoE 802.3af.
• Number of admin cards: 1.
• Number of identifiers: 10 000.
• Body: Metal alloy with a high level of anti-vandalism
and corrosion resistance (on the front panel there
is a glass decorative overlay).
• Colors: Black, Gold, Silver.
• Dimensions for installation: 94 × 151 × 45 mm.
• Size of the panel: 99 × 159 × 48 mm.
• Installation: Flush, surface with BR-AV2.
1
3
2
4

EAN: 5060514912911 (GOLD)
EAN: 5060514913727 (SILVER)
EAN: 5060514913734 (BLACK)
Completeness check of the product
Before installation of the reader, it is necessary to check that it is complete
and all components are available.
Reader kit includes:
Reader
Manual
Flush mounting bracket
Set of wires with connectors for connection of power supply,
lock, and additional modules
A set of plugs for connections
Set of set screws with a wrench
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
After verifying the device's completeness, you can switch to the reader
connection.
For connection you will need:
Electrical connection
An Ethernet UTP CAT5 or higher cable connected to a network
switch / router.
Cable length recommendations
The maximum length of the UTP CAT5 cable segment should not exceed 100 meters,
according to the IEEE 802.3 standard.
Power supply at +12 V, 2 amps, if there is no PoE.
Wires must be brought for the connection of the lock, exit button
and additional modules (optional).
You can connect any type of electromechanical or electromagnetic lock for which the switched current
does not exceed 5 Amps.

Exit Button/Door Sensor/RS485
LAN (PoE)
Power/Relay Outputs
RS232 (Optional)
Green Black White
RX GND TX
Wiegand
WD1 GND WD0
1 2 3 4 5 6
EXIT GND DIN DS 485+ 485-
1
2
+12V
485+
485-
SH-42
External access
controller
D0D1
Electromagnetic
lock
N S
R B Y
Power supply
12V
Power supply
12V
Wiegand input
Exit
button
Door
sensor
Switch

Exit Button/Door Sensor/RS485
LAN (PoE)
Power/Relay Outputs
RS232 (Optional)
Green Black White
RX GND TX
Wiegand
WD1 GND WD0
1 2 3 4 5 6
EXIT GND DIN DS 485+ 485-
Exit
button
1
2
+12V
485+
485-
SH-42
D0D1
Electromechanical
lock
Power supply
12V
N S
R B Y
Switch
Door
sensor
External access
controller
Wiegand input
Power supply
12V
EAN: 5060514912911 (GOLD)
EAN: 5060514913727 (SILVER)
EAN: 5060514913734 (BLACK)

Mechanical mounting
of 96 × 153 × 46 mm (for flush mounting) must be provided.
and the local network.
Before mounting the reader, a hole or recess in the wall with dimensions
Do not intentionally close it. Also it is necessary to make a drain for water
It is also necessary to provide supply of a power cable, additional modules
at the bottom of the niche which will serve to divert water out.
Attention: the hole at the bottom is designed to drain the water.
Reader Flush Bracket
Niche
96 mm
153 mm
120-140 cm
Flush Bracket Reader
A hole for water flow.
Please do not close during installation.
Gutter: 20 mm
Depth: 46 mm
Screws
99 mm 48 mm
159 mm
94 mm
151 mm

EAN: 5060514912911 (GOLD)
EAN: 5060514913727 (SILVER)
EAN: 5060514913734 (BLACK)
Warranty
The warranty card number
Model name
Serial number
Seller name
With following stated terms of warranty is familiar, functional test was
performed in my presence:
Customer signature
Warranty conditions
The warranty period of the product — 36 (thirty-six) months from
the date of sale.
Transportation of product must be in its original packaging or supplied one
by the seller.
The product is accepted in warranty repair only with a properly filled warranty
card and the presence of intact stickers or labels.
The product is accepted for examination in accordance with the cases
provided by law, only in the original packaging, in a full complete set,
appearance corresponding to the new equipment and presence of all relevant
properly filled documents.
This warranty is in addition to the constitutional and other consumer rights
and in no way restrict them.
Terms of warranty
The warranty card must indicate the name of the model, serial number,
purchase date, name of the seller, seller company stamp and
the customer’s signature.
Delivery to the warranty repair is carried out by the buyer himself.
Warranty repairs carried out only during the warranty period specified
in the warranty card.
The service center is committed to do everything possible to carry out
the repair warranty products, up to 24 working days. The period spent
on the restoration of product functionality is added to the warranty period.

www.bas-ip.com