Bauhn ATV40FHD-0118 User manual

INSTRUCTION MANUAL
Model Number: ATV40FHD-0118
40” Full High Denition LED LCD TV
1300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS

ii 1300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
This page has been left blank intentionally.

iii
1300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
Congratulations on choosing to buy a BAUHN®product. All products
brought to you by BAUHN®are manufactured to the highest standards
of performance and safety and, as part of our philosophy of customer
service and satisfaction, are backed by our comprehensive 1 Year
Warranty.
We hope you will enjoy using your purchase for many years to come.
Welcome

iv 1300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
Remote Control
1 POWER: Set the unit in standby mode;
press it again to switch it on.
2 GOTO: Jump to a different chapter of the
DVD.
3 ANGLE: View DVD playback from different
angles, if the DVD has this feature.
4 REPEAT: Repeat a different chapter/title or
the entire DVD.
5 FAV: Press to display your favourite
program in DTV mode.
6 TEXT: Switch between TV and Teletext
mode.*
7 SUBTITLE: Enable/disable subtitles.
8 SIZE / ZOOM: Change the picture size.
9 MEDIA: Select USB mode.
10 : PLAY/PAUSE in TIMESHIFT and USB
mode.
11 RECORD: Record programs in DTV mode.
D-SETUP: Display the main disc menu.
12 : Stop playing.
13 MENU: Display the main TV menu.
14 / / / :Press the UP/DOWN/RIGHT/
LEFT buttons to navigate the on-screen
menus and adjust the system settings to
your preference. Press OK to confirm your
selection.
15 SOURCE: Switch the input source.
16 VOL +/-: Turn the volume up/down.
17 NUMBER BUTTONS (0-9): Press to select
a TV channel directly when watching TV.
The channel changes after 2 seconds.
18 -/--: Switch the digits.
19 LANG/AUDIO: Switch the available sound-
track language (DTV/DVD).
20 P-MODE: Cycle through the different
picture modes.
21 S-MODE: Cycle through the different
sound modes.
22 : Return to the previous channel.
23 DISPLAY: Display information of the
current program.
1
3 4
5
6
37
38
2
7
8
9
10
11
12
13
14
15
16
17
19
18
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36

v
1300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
Remote Control (Cont.)
24 CH+/-: Press to play the next or previous
channel; press repeatedly to scan through
the channels.
25 MUTE: Mute the sound. Press again or
press V+ to restore the sound.
26 EPG: Launch the Electronic Program Guide
(DTV).
D.MENU: Display the main disc menu.
27 OK: Confirm selection.
28 EXIT: Exit from the main TV menu displayed
on the screen.
TITLE: Display the DVD title menu (DVD).
29 : Play the previous file.
30 : Play next file.
INDEX: Display the recorded programs list.
31 : Move fast backward.
32 : Move fast forward.
33 ASPECT: Press to zoom in and out of the
picture.
34 SUBPAGE: Manually jump to the previous
or next subpage of Teletext.
35 FREEZE: Hold the picture.
36 SLEEP: Set the TV sleep timer.
37 A-B: Repeat DVD scenes of your
preference.
38 TV / RADIO: Switch the unit between TV
and radio.
:Open or close the disc compartment
(DVD).
NOTE: DVD related functions are ineffective on the
ATV40FHD-0118.
* Teletext or Austext is no longer available, nor is there
any plan for a replacement teletext service in Australia.
For more information, please visit the websites of the
Australian channel providers.
However, one teletext option, “closed captions”, is still
working on most Australian television channels. This
service allows you to activate subtitles while watching
normal television programs that provide it.
1
3 4
5
6
37
38
2
7
8
10
11
12
13
14
15
16
17
19
18
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36

vi 1300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
Remote Control (Cont.)
Using the Remote Control
Inserting Batteries
Install the batteries as illustrated in Fig. 1, right.
• Open the cover at the back of the remote control unit
completely.
• Insert two AAA size batteries according to the polarity
markings (+ / -) inside the compartment. Make sure
the batteries are correctly aligned and properly
pushed into place so they can power the remote
control unit.
• Slide the cover back into position.
NOTE: When testing the remote control unit after
replacing the batteries, make sure the TV is
properly connected to the mains power supply.
Battery Service Life
• The service life of batteries depends on usage and
environmental conditions. They should normally last
for about one year.
• If the remote control fails to work even when it is
operated near the TV, replace the batteries.
Precautions When Using Batteries
• Do not use old and new batteries together.
• Do not use different types of batteries (for example, Manganese and
Alkaline batteries) together.
• Note that there are chargeable and non-chargeable batteries. Do not
attempt to charge non-chargeable batteries.
• Remove the batteries from the remote control unit if you do not intend to
use the unit for a long time.
• When discarding used batteries, follow any guidelines for recycling and
disposal of batteries that apply in your local area.
• Keep batteries away from children and pets.
• Never throw batteries into a fire or expose them to fire or other sources of
extreme heat.
Push
Open
Press

vii
1300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
Remote Control (Cont.)
Using the Remote Control
To use the remote control, point it towards the
remote sensor at the front of the television.
The remote control has a range of up to
approximately six metres (6m) from the TV at an
angle of up to 30 degrees each to the right and
left of the sensor, as illustrated on the right.
The remote control will not operate if its path is
blocked.
NOTES:
• Do not drop, step on or otherwise impact the
remote control. This may damage the parts or
lead to malfunction.
• The operating distance may vary according to
the brightness of the room.
• Do not point bright lights at the remote control
sensor.
• Do not place objects between the remote
control and the remote control sensor.
• Do not use this remote control while
simultaneously operating a remote control of
other devices.
Remote Control
Sensor
Sensor

viii
1300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
40” Full High Definition LED LCD TV
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts
for a period of 12 months from the date of purchase. Defects that occur within
this warranty period, under normal use and care, will be repaired, replaced
or refunded at our discretion. The benefits conferred by this warranty are in
addition to all rights and remedies in respect of the product that the consumer
has under the Competition and Consumer Act 2010 and similar state and
territory laws.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and to compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.

ix
1300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
Welcome ii
Remote Control iii
Warranty Details vii
General Safety Instructions 1
Installation 6
Controls and Connections 8
Getting Started 15
Basic Operations 16
Electronic Program Guide (EPG) 18
Recording 19
USB Mode 22
Menus 25
FAQs 38
Specifications 40
Repair and Refurbished Goods or Parts Notice 41
Contents

11300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
General Safety Instructions
Read this manual thoroughly before first use and keep it in a safe place for
future reference, along with the completed warranty card, purchase receipt
and carton. The safety precautions enclosed herein reduce the risk of fire,
electric shock and injury when correctly adhered to.
Follow all instructions and take notice of all the warnings.
This product complies with Australian Safety standard AS/NZS
60065:2012+A1:2015 to ensure the safety of the product.
The lightning flash with an arrowhead
symbol within an equilateral triangle is
intended to alert you to the presence
of non-insulated dangerous voltage
within the product’s enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an equi-
lateral triangle is intended to alert you
to the presence of important operating
and maintenance (servicing) instruc-
tions in the literature accompanying
the product.
To reduce the risk of electric shock, do not remove
the cover (or back).
This unit contains no user-serviceable parts inside.
Refer all servicing to qualified service personnel only.
IMPORTANT INFORMATION
If the television is not positioned in a sufficiently stable location, it can be a potential
hazardous and may fall. Many injuries, particularly those to children, can be avoided by
taking simple precautions:
• Use cabinets or stands recommended by the manufacturer of the television.
• Only use furniture that can safely support the television.
• Ensure the TV is not overhanging the edge of the supporting furniture.
• Do not place the TV on tall furniture (e.g. cupboard or bookcase) without
anchoring both the furniture and the TV to a suitable support.
• Do not place the TV on cloth or other materials between the TV and supporting
furniture.
• Educate children about the dangers of climbing on furniture to reach the
television or its controls.
The RCM is a visible indication of a product’s compliance with all applicable ACMA
regulatory arrangements, including all technical and record-keeping requirements.
IMPORTANT WARNINGS AND CAUTIONS
• Only connect this TV to a mains socket with a protective earthing connection.
• Do not change or modify the appliance in any way.
• Only use the attachments/accessories specified by the manufacturer.

2
1300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
General Safety Instructions (Cont.)
Installation
Follow instructions: Only install this TV set in accordance with the instructions in this
manual.
• This TV is equipped with standard wall-mounting points, and we recommend that
a wall bracket be installed between the TV and the wall to prevent the TV from
falling from a cabinet. (The bracket is not included.)
• When deciding on where to put the TV set, make sure the place is:
• Well ventilated, and away from damp and cold.
• Protected from overheating and away from direct sunlight.
• Away from moisture drips or splashes.
• Protected from excessive dust or grease.
• Bookcase: Do not install this equipment in a confined space such as a bookcase or
similar unit.
• Heat: Do not install the TV set near heat sources such as radiators, stoves or other
audio visual equipment (including amplifiers) that produce heat.
• Water: Do not place containers with liquids (such as vases) or with small metallic
objects on top of the unit. If liquid enters the unit or any metal object falls into the
unit, it may result in short-circuit, fire or electric shock.
• Fire or explosion: Do not use or store flammable or combustible materials near the
unit. Doing so may result in fire or explosion. Do not place any naked flame sources,
such as lit candles, cigarettes or incense sticks on top of the TV set.
• Antenna: Install the antenna away from high-voltage power lines and
communication cables and make sure it is installed securely. If the antenna touches
a power line, contact could result in fire, electric shock or serious injury.
• Ventilation: Install the unit at an adequate distance from the wall to ensure sufficient
ventilation. If the temperature inside the unit rises, it may result in fire.Electrical Safety
and Cord Handling
• Voltage: Before installing this TV set, make sure your outlet voltage corresponds to
the voltage stated on the appliance rating label.
• Protect from moisture: To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture; do not use it anywhere near water; do not touch
the power plug with wet hands.
• Damage: Do not use a damaged power cord, plug or loose outlet. Doing so may
cause an electric shock.
• Power outlet: Do not plug several devices into the same outlet. Doing so may
cause the outlet to overheat and start a fire. Make sure the outlet is readily
accessible during operation of the equipment.

31300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
• Disconnect: Where the mains plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily operable.
• Power plug: Make sure the plug is properly installed before inserting it fully into the
outlet. A loose or improperly inserted power plug may cause a fire.
• Protect the cord: Do not bend, twist or kink the power cord excessively. Do not
allow anything to rest on or roll over the power cord and antenna cable. Doing
so may cause a fire or an electric shock. Do not run the power cord near heat-
producing appliances such as radiators, stoves or irons. The excessive heat could
melt the insulation and expose live wires, resulting in fire or electric shock.
• Disconnect: Always grasp the plug when disconnecting the power cord. Pulling the
cord can damage the internal wire and may cause a fire.
• Lightning storms: Unplug this TV during lightning storms or when unused for long
periods of time. Not doing so may result in fire or electric shock.
Usage Conditions and Restrictions
• Adjustments: Follow the instructions in this manual when installing and adjusting
the TV set. Only adjust those controls that are covered in this manual, as improper
adjustment of other controls may result in damage. If this happens, unplug the TV
set and have it serviced by appropriately qualified personnel, or phone the after
sales support line for advice.
• Ventilation: Do not cover the ventilation openings with items such as newspapers,
tablecloths, curtains etc. as this could impede ventilation.
• Cabinet slots: Do not insert objects of any kind into this unit through the cabinet
slots, as they could touch the current-carrying parts or short-circuit parts, resulting
in fire, electric shock or damage to the unit.
• Smoke or odour: If you notice any unusual odours or smoke around the unit,
immediately disconnect the unit from the outlet and contact the service centre.
Failure to do so may result in fire or electric shock.
• When not in use: When not using the unit for long periods of time, disconnect the
power cord fromww the wall outlet. Dust could accumulate over time on the unit
and cause it to generate heat and ignite, or deteriorate insulation, which in turn may
result in an electrical fire.
• Moving: When moving the unit, be sure to turn it off and unplug it from the wall
outlet. Moving the unit with the power cord connected to the outlet may cause
damage to the cord, resulting in fire or electric shock.
General Safety Instructions (Cont.)

4
1300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
General Safety Instructions (Cont.)
WARNING!
Batteries shall not be exposed to excessive heat such as sunshine,
fire or souces of heating.
• Packaging: This product has been packaged to protect it against transportation
damage. Unpack the appliance and keep the original packaging carton and
materials in a safe place. It will help to prevent damage if the product needs to be
transported in the future, and you can use it to store the appliance when not in use.
• Batteries: When removing the batteries from the remote control, make sure to keep
them out of reach of infants and children. Seek medical attention immediately if a
child has swallowed a battery. Please dispose of batteries responsibly by recycling
at your nearest recycling centre.
• Usage restriction: This product is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instructions concerning
use of the product by a person responsible for their safety.
• Children: Supervise young children to ensure they do not play with the TV.
Cleaning and Maintenance
• Unplug: To reduce the risk of fire and electric shock, always unplug the TV before
cleaning.
• Cleaning: Only use a soft, dry cloth for cleaning the TV; do not use a damp
cloth. Never clean with industrial strength polish, wax, benzene, paint thinner, air
freshener, lubricant, detergent or other chemicals. Wipe off any moisture, dirt or
dust on the power plug pins with a clean, dry cloth.
• Repair: If the unit requires repair, contact the after sales support line; never
disassemble or modify the unit or attempt to service it yourself.
• Service: Refer all servicing to qualified service personnel. Servicing is required
when the TV has been damaged in any way, such as when the power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the TV, when
the TV has been exposed to rain or moisture, does not operate normally, or has
been dropped.

51300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
Responsible disposal of the packaging
The packaging of your TV has been selected from environmentally friendly materials
and can usually be recycled. Please ensure these are disposed of correctly. Plastic
wrapping can be a suffocation hazard for babies and young children, please ensure
all packaging materials are out of reach and are safely disposed of. Please ensure
they are offered for recycling rather than throwing these materials away.
Responsible disposal of the TV
At the end of its working life, do not throw this TV out with your household rubbish.
An environmentally friendly method of disposal will ensure that valuable raw materials
can be recycled. Contact your local authority for your nearest recycling centre.
Electrical and electronic items contain materials and substances which, if handled
or disposed of incorrectly, could potentially be hazardous to the environment and
human health.
Climate
If moving the apparatus from one location to another, for example from a cold
environment to a warm one. Allow sufficient time for the apparatus to acclimatise to
the new location before switching on.
In tropical climates keep the air surrounding the unit sufficently dry to avoid
condensation forming.
General Safety Instructions (Cont.)

6
1300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
Installation
Attaching the Stand
Step 1
Place a soft cushioned material on top
of a flat surface to prevent damaging the
screen panel. Then place the TV screen
flat on top, with the screen side facing
down, as illustrated on the right (1).
Step 2
Align the stand leg to the installation
point, as illustrated on the right (2).
Step 3
Tighten the screws (supplied) with a
screwdriver to affix the stand to the
panel, as illustrated on the right (3).
CAUTION!
Do not apply excessive force as this may
damage the screw holes.
IMPORTANT!
• Make sure the TV set is unplugged from the power supply before
installing or removing the stand.
• The TV panel may be awkward to install on your own. We recommend
you ask someone to help with installation and/or removal of the stand.
Your TV is packaged with the stand and the cabinet separated. Before using
the TV, install the stand as described below, or if you want to mount it to
a wall, see the next page for mounting advice; the wall mount itself is not
supplied.

71300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
Installation (Cont.)
• The TV set is equipped with holes on the back panel for use with wall-
mounting brackets (not included). Please use the illustration below as a
reference when buying wall-mounting brackets.
• Use four standard M6*10mm screws (or longer, depending on the mounting
bracket) to mount this TV.
IMPORTANT!
• Make sure the TV set is unplugged from the power supply before wall-
mounting it and removing the stand.
• We recommend you contact a professional for assistance when wall-
mounting the TV. We assume no liability for any eventual damage to the
product or injury to yourself if you mount the TV on your own.
Back of the TV
NOTE: The screws in the package are for securing the TV stand only. If
you are wall-mounting the TV, please consult a qualified installer
for further instructions on bracket support and wall support.
Wall-Mounting Instructions

8
1300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
Controls and Connections
Front View
NOTE: See the next page for a detailed description of all sockets on the back panel.
1. LCD display screen
2. IR (infra-red) sensor for
remote control.
3. Power Indicator: In
standby mode the
indicator light is red;
when switching on the
unit the indicator light
will illuminate blue.
4. Increase/decrease the volume level or move left/right in the Settings
menu.
5. Select the previous/next channel or move up/down in the Settings menu.
6. Enter the Settings menu.
7. Select the input source.
8. Switch the TV to On or Standby.
Rear View
1
2
3

91300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
Controls and Connections (Cont.)
Main Unit Back View Controls and Sockets
1 POWER CORD
2 HEADPHONES OUTPUT
3 YPbPr INPUT (COMPONENT): Supports both SD and HD (High Definition)
picture quality.
4 PC AUDIO INPUT
5 PC (VGA) INPUT: Connect to a PC or other device with a VGA interface.
6 OPTICAL AUDIO OUTPUT: Connect to an external digital audio device.
7 ANTENNA INPUT: For connection of the external antenna.
8 HDMI INPUT: Provides an all digital video/audio connection between the TV
and any HDMI device, such as a DVD player, gaming console or A/V receiver.
9 USB INPUT: Connect a USB storage device for PVR recording and
multimedia file playback.
10 VIDEO INPUT (COMPOSITE): Supports Standard Definition (SD) picture
quality connections.
11 AUDIO R/L INPUT: Shared between Composite and Component video.
5
8
9
8
10
11
1 2 3 4 6 7

10
1300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
Controls and Connections (Cont.)
Connecting to an AC Power Source
IMPORTANT!
• Ensure all cables are disconnected from the main unit before connecting the
TV to an AC power source.
• Read through the instructions before connecting the TV to other equipment.
• Terminals are HAZARDOUS LIVE and the external wiring connected to these
terminals requires installation by an INSTRUCTED PERSON or the use of
ready-made leads or cords.
To Power Outlet
Main Unit
Connecting an External Antenna
For best picture quality, we recommend connecting the TV set to an external
antenna.
75Ω
antenna
plug
Indoor
antenna
amplier
Outdoor
antenna
amplier
Power plug
of antenna
amplier
Antenna

11 1300 886 649 Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
Composite Video (CVBS) Connection
For basic connection, use the
composite Audio L/R (white/red) and
CVBS (yellow) cable to connect the
unit with other devices.
AV Cable
(included)
Controls and Connections (Cont.)