Bauhn ATVS55-1016 User manual

Model Number: ATVS55-1016
55” 4K Ultra High Definition
LED LCD Smart TV
1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
INSTRUCTION MANUAL

ii 1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
Congratulations on choosing to buy a BAUHN®product. All products
brought to you by BAUHN®are manufactured to the highest standards
of performance and safety and, as part of our philosophy of customer
service and satisfaction, are backed by our comprehensive 1 Year
Warranty.
We hope you will enjoy using your purchase for many years to come.
Welcome

iii
1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
Remote Control
1 POWER: Set the unit on standby
mode; press it again to switch it on.
2 TV/RADIO: Select TV or Radio (DTV).
3 P-MODE: Switch the picture mode.
4 NUMBER BUTTONS (0-9): Select a
TV channel directly when watching TV.
The channel changes after 2 seconds.
5 TEXT: This button has no function
with this TV.
6 MENU: Display the main menu; press
again to return to the previous menu
page.
7 SOURCE: Select the input source.
8 TITLE: Display the DVD title menu
(DVD*).
9 / / / :Press the RIGHT/LEFT
UP/DOWN buttons to navigate the
on-screen menus and adjust the
system settings to your preference.
Press OK to confirm your selection.
10 RETURN: Return to the previous
page in FreeviewPlus catchup
applications.
11 SMART HUB: Enter the Smart Hub
menu.
12 EXIT: Exit from the main TV menu
displayed on the screen. Display the
DVD title menu (DVD)*.
13 INFO: Display information of the current
program (DTV).
14 VOL +/-: Turn the volume up/down.
15 D-SETUP: Display the setup menu
(DVD)*.
16 : Load/unload a disc (DVD)*.
17 : Pause and start live TV; Start or
pause FreeviewPlus catchup videos
and USB media playback.
18 : Record program in DTV mode.
19 : Stop playing.
20 :In HbbTV mode,
1
2
3
4
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
5

iv 1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
Remote Control (Cont.)
press the colour buttons to access
HbbTV applications (FreeviewPlus
catchup TV programs).
21 MUTE: Mute the sound. Press again
to restore the sound.
22 S-MODE: Switch the sound mode.
23 INDEX: Display the list of recorded
programs.
24 SUBTITLE: Enable/disable subtitles.**
25 FAV: Enter the favourite channels list.
26 EPG: Launch the Electronic Program
Guide (DTV).
27 CH. List: See a list of stored
channels.
28 CH+/-: Press to play the next or
previous channel; press repeatedly to
scan through the channels.
29 D.MENU: Display the disc menu
(DVD)*.
30 : Move fast forward.
31 : Move fast backward.
32 : Play the next file.
33 : Play the previous file.
NOTES:
*DVD related functions are ineffective on
the ATVS55-1016.
**Teletext or Austext is no longer available,
nor is there any plan for a replacement
teletext service in Australia. For more
information, please visit the websites of
the Australian channel providers.
However, one teletext option, “closed
captions”, is still working on most
Australian television channels. This
service allows you to activate subtitles
while watching normal television programs
that provide it.
1
2
3
4
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
5

v
1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
Remote Control (Cont.)

Tips:
• Ensure to point the infrared transmitters directly at the TV.
• Be careful not to cover the infrared transmitters with your fingers while
using the keyboard.
• When using the QWERTY keyboard, do not cover the area where the IR
sensors are marked above.
• To enter UPPERCASE letters, press the ‘Caps’ button first, followed by the
chosen letter button.
• To enter the numbers and characters shown on the keys in yellow, press the
‘Alt’ button first, followed by the chosen letter button.
• As an alternative to the remote control keyboard, you can use the on screen
keyboard.
There is a built-in keyboard on the back of the remote control for easy
operation (for Smart Hub).
IR transmitters
Battery Cover

vi 1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
Remote Control (Cont.)
Using the Remote Control
To use the remote control, point it towards the remote
sensor at the front of the TV.
The remote control has a range of up to approximately
five metres (5m) from the TV at an angle of up to 30
degrees each to the right and left of the sensor, as
illustrated on the right.
The remote control will not operate if its path is blocked.
NOTES:
• Do not drop, step on or otherwise impact the remote
control as this may damage the parts or lead to a
malfunction.
• The operating distance may vary according to the
brightness of the room.
• Do not point bright lights at the remote control sensor.
• Do not place objects between the remote control and
the remote control sensor.
• Do not use this remote control while simultaneously
operating a remote control of other devices.
Remote Control Preparation
• Install the batteries in the back of the remote control,
ensuring to match up the polarity markings (+/-).
• The batteries should last for around one year. The
service life of the batteries will depend on how often
they are used.
• If the remote control does not work when operated
near the TV, replace the batteries.
NOTE:
• Remove the batteries if the remote control is not going
to be used for a long time.

Top
Bottom
Remote Control
Sensor

5M

1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
55” 4K Ultra High Definition LED LCD Smart TV
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts
for a period of 12 months from the date of purchase. Defects that occur within
this warranty period, under normal use and care, will be repaired, replaced
or refunded at our discretion. The benefits conferred by this warranty are in
addition to all rights and remedies in respect of the product that the consumer
has under the Competition and Consumer Act 2010 and similar state and
territory laws.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and to compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
vii

viii 1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
Welcome ii
Remote Control iii
Warranty Details vii
General Safety Instructions 1
Installation 5
Controls and Connections 7
Getting Started 15
Basic Operations 19
Electronic Program Guide (EPG) 21
Recording 22
Smart Hub 25
Media Mode 29
Menus 32
FAQs 53
Specifications 55
Repair and Refurbished Goods or Parts Notice 56
Contents

1
1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
Read this manual thoroughly before first use and keep it in a safe place for
future reference, along with the completed warranty card, purchase receipt
and carton. The safety precautions enclosed herein reduce the risk of fire,
electric shock and injury when correctly adhered to.
Follow all instructions and take notice of all the warnings.
This product complies with Australian Safety standard AS/NZS
60065:2012+A1:2015 to ensure the safety of the product.
General Safety Instructions
IMPORTANT WARNINGS AND CAUTIONS!
• Only connect this TV to a mains socket with a protective earthing connection.
• To prevent damage which may result in fire or an electric shock hazard, do not
expose this appliance to rain or moisture.
• Do not change or modify the appliance in any way.
• Only use the attachments/accessories specified by the manufacturer.
The lightning flash with an arrowhead
symbol within an equilateral triangle is
intended to alert you to the presence
of non-insulated dangerous voltage
within the product’s enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an equi-
lateral triangle is intended to alert you
to the presence of important operating
and maintenance (servicing) instruc-
tions in the literature accompanying
the product.
To reduce the risk of electric shock, do not remove
the cover (or back).
This unit contains no user-serviceable parts inside.
Refer all servicing to qualified service personnel only.

21300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
• When deciding on where to put the TV set, make sure the place is:
• Well ventilated, and away from damp and cold.
• Protected from overheating and away from direct sunlight.
• Away from moisture drips or splashes.
• Protected from excessive dust or grease.
• Bookcase: Do not install this equipment in a confined space such as a
bookcase or similar unit.
• Heat: Do not install the TV set near heat sources such as radiators, stoves
or other audio visual equipment (including amplifiers) that produce heat.
• Water: Do not place containers with liquids (such as vases) or with small
metallic objects on top of the unit. If liquid enters the unit or any metal
object falls into the unit, it may result in short-circuit, fire or electric shock.
• Fire or explosion: Do not use or store flammable or combustible materials
near the unit. Doing so may result in fire or explosion. Do not place any
naked flame sources, such as lit candles, cigarettes or incense sticks on
top of the TV set.
• Antenna: Install the antenna away from high-voltage power lines and
communication cables and make sure it is installed securely. If the antenna
touches a power line, contact with the antenna could result in fire, electric
shock or serious injury.
• Ventilation: Install the unit at an adequate distance from the wall to ensure
sufficient ventilation. If the temperature inside the unit rises, it may result in fire.
General Safety Instructions (Cont.)
Installation
Follow instructions: Only install this TV set in accordance with the instructions
in this manual. If a television is not positioned in a sufficiently stable location, it
can be potentially hazardous due to falling and can cause injury, particularly to
children.
• This TV is equipped with standard wall-mounting points, and we recommend
that a wall bracket be installed between the TV and the wall to prevent
the TV from falling from a cabinet. (The bracket is not included.)
To prevent injuries from your television falling, take a few simple precautions:
• Do not place the TV on tall furniture (e.g., on a cupboard or bookcase)
without anchoring both the furniture and the TV to a suitable support.
• Only use furniture that can safely support the television.
• Ensure the TV is not overhanging the edge of the supporting furniture.
• Educate children about the dangers of climbing on furniture to reach TV
controls.
• Do not place the TV on cloth or other materials.

3
1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
Electrical Safety and Cord Handling
• Voltage: Before installing this TV set, make sure your outlet voltage
corresponds to the voltage stated on the appliance rating label.
• Protect from moisture: To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture; do not use it anywhere near
water; do not touch the power plug with wet hands.
• Damage: Do not use a damaged power cord, plug or loose outlet. Doing so
may cause an electric shock.
• Power outlet: Do not plug several devices into the same outlet. Doing so
may cause the outlet to overheat and start a fire. Make sure the outlet is
readily accessible during operation of the equipment.
• Where the mains plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
• Power plug: Make sure the plug is properly installed before inserting it fully
into the outlet. A loose or improperly inserted power plug may cause a fire.
• Protect the cord: Do not bend, twist or kink the power cord excessively.
Do not allow anything to rest on or roll over the power cord and antenna
cable. Doing so may cause a fire or an electric shock. Do not run the power
cord near heat-producing appliances such as radiators, stoves or irons. The
excessive heat could melt the insulation and expose live wires, resulting in
fire or electric shock.
• Disconnect: Always grasp the plug when disconnecting the power cord.
Pulling the cord can damage the internal wire and may cause a fire.
• Lightning storms: Unplug this TV during lightning storms or when unused
for long periods of time. Not doing so may result in fire or electric shock.
Usage Conditions and Restrictions
• Adjustments: Follow the instructions in this manual when installing and
adjusting the TV set. Only adjust those controls that are covered in this
manual, as improper adjustment of other controls may result in damage.
If this happens, unplug the TV set and have it serviced by appropriately
qualified personnel, or phone the after sales support line for advice.
• Ventilation: Do not cover the ventilation openings with items such as
newspapers, tablecloths, curtains etc. as this could impede ventilation.
• Cabinet slots: Do not insert objects of any kind into this unit through the
cabinet slots, as they could touch the current-carrying parts or short-circuit
parts, resulting in fire, electric shock or damage to the unit.
• Smoke or odour: If you notice any unusual odours or smoke around
General Safety Instructions (Cont.)

41300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
General Safety Instructions (Cont.)
the unit, immediately disconnect the unit from the outlet and contact the
service centre. Failure to do so may result in fire or electric shock.
• When not in use: When not using the unit for long periods of time,
disconnect the power cord from the wall outlet. Dust could accumulate
over time on the unit and cause it to generate heat and ignite, or deteriorate
insulation, which in turn may result in an electrical fire.
• Moving: When moving the unit, be sure to turn it off and unplug it from the
wall outlet. Moving the unit with the power cord connected to the outlet
may cause damage to the cord, resulting in fire or electric shock.
• Batteries: When removing the batteries from the remote control, make sure
to keep them out of reach of infants and children. Seek medical attention
immediately if a child has swallowed a battery.
• Usage restriction: This product is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of ex-
perience and knowledge, unless they have been given supervision or instruc-
tions concerning use of the product by a person responsible for their safety.
• Children: Supervise young children to ensure they do not play with the TV.
Cleaning and Maintenance
• Unplug: To reduce the risk of fire and electric shock, always unplug the TV
before cleaning.
• Cleaning: Only use a soft, dry cloth for cleaning the TV; do not use a damp
cloth. Never clean with industrial strength polish, wax, benzene, paint
thinner, air freshener, lubricant, detergent or other chemicals. Wipe off any
moisture, dirt or dust on the power plug pins with a clean, dry cloth.
• Repair: If the unit requires repair, contact the after sales support line; never
disassemble or modify the unit or attempt to service it yourself.
• Service: Refer all servicing to qualified service personnel. Servicing is
required when the TV has been damaged in any way, such as when the
power supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the TV, when the TV has been exposed to rain or moisture,
does not operate normally, or has been dropped.

5
1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
Installation
IMPORTANT!
• Make sure the TV set is unplugged from the power supply before
installing or removing the stand.
• The TV panel may be awkward to install on your own. We recommend
you ask someone to help with installation and/or removal of the stand.
Your TV is packaged with the two stand legs separate from the cabinet.
Before using the TV, install the stand as described below, or if you want to
mount it to a wall, see page 6 for mounting advice; the wall mount itself is not
supplied.
M6 x 20mm, 2pcs
Attaching the Stand
Step 1
Place a soft cushioned material on top
of a flat surface to prevent damaging the
screen panel. Then place the TV screen
flat on top, with the screen side facing
down, as illustrated on the right (Fig 1).
Step 2
Align the stand leg to the installation
point, as illustrated on the right (Fig 2).
Step 3
Tighten the screws (supplied) with a
screwdriver to affix the stand to the
panel, as illustrated on the right (Fig 3).
CAUTION!
• Do not apply excessive force as this
may damage the screw holes.
• Unplug the power plug first when
installing or removing the TV Stand.
• To avoid any damage to this TV, we
recommend you ask someone to
help with installation and/or removal
of the stand.
Fig 1
Fig 2
Fig 3

61300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
Installation (Cont.)
• The TV set is equipped with holes on the back panel for use with wall-
mounting brackets (not included). Please use the illustration below as a
reference when buying wall-mounting brackets.
• Use four standard M6*10mm screws (or longer, depending on the mounting
bracket) to mount this TV.
IMPORTANT!
• Make sure the TV set is unplugged from the power supply before
removing the stand and mounting it to a wall.
• We recommend you contact a professional for assistance when wall-
mounting the TV. We assume no liability for any damage to the product or
injury to yourself if you mount the TV.
Back of the TV
NOTE: The screws in the package are for securing the TV stand only.
If you are wall-mounting the TV, please consult a professional
installer for further instructions on bracket support and wall
support.
Wall-Mounting Instructions
Back of the TV
400mm
200mm

7
1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
Controls and Connections
Front View
Back View
NOTE: See next page for a detailed description of all the sockets on the back
panel.
1. LCD Display Screen
2. IR (infra-red) Sensor for Remote Control
Power Indicator: In standby mode the indicator light is red; when
switching on the unit the indicator light will illuminate.
3. SOURCE: Select the input source.
4. MENU: Enter the settings menu.
5. CH / : Select the next/previous channel or move up/down.
6. VOL + / - : Increase/decrease the volume level or move left/right.
7. STANDBY: Turn the TV On/Off.
1
2
4 5 6 73

81300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
Controls and Connections (Cont.)
Main Unit Back View Controls and Sockets
1. LAN INPUT (Local-Area Network): For connecting to the internet.
2. USB: Connect a USB storage device for PVR recording and multimedia
file playback.
3. AV INPUT 1 (COMPOSITE): Supports SD picture quality connections.
4. ANTENNA INPUT: For connection of the external antenna.
5. COAXIAL S/PDIF OUTPUT: Connect to an external digital audio device.
6. OPTICAL S/PDIF OUTPUT: Connect to an external digital audio device.
7. HEADPHONES OUTPUT: Connect your headphones via a 3.5mm
connector.
8. MINI Y/PB/PR INPUT (COMPONENT): Supports both SD (Standard
Definition) and HD (High Definition) picture quality.
9. MINI VIDEO (COMPOSITE) & AUDIO L/R INPUT: Supports SD picture
quality connections. L/R audio connection is shared with YPbPr.
10. HDMI INPUTS: Provides a digital video/audio connection between the
TV and any HDMI devices, such as a DVD player, gaming console or A/V
receiver. HDMI INPUT with ARC: Allows Audio to transmit from your TV
back to an ARC-supported external audio device.
9
7
8
10
1 2 5
6
34

9
1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
To Power Outlet
Main Unit
Controls and Connections (Cont.)
Connecting to an AC Power Source
To Power Outlet
Main Unit
Connecting an External Antenna
For the best picture quality, we recommend connecting the TV set to an
external antenna.
75Ωantenna
plug goes into
the antenna
port in the
back of your
TV
Indoor
antenna
amplifier
Outdoor
antenna
amplifier
Power plug
of antenna
amplifier
Antenna
IMPORTANT!
Read through the instructions before connecting the TV to other equipment.
NOTE: At this stage, TV programming in Australia is not available in Ultra HD.
Therefore, the result of up-scalling and displaying HD broadcast signals on a
Ultra HD TV can be soft images, which don’t have the detail or smoothness
you see when watching the same content on an HD TV.

10 1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS

Composite Video (CVBS) Connection - AV IN 1
Composite Video (CVBS) Connection - AV IN 2
For basic connection, use the
composite Audio L/R (white/
red) and CVBS (yellow) cable
to connect the unit with other
devices.
Connect the Mini AV cable (supplied) to the
AV IN 2 socket. Then connect the other end to
your external device.
AV Cable
(not included)
Controls and Connections (Cont.)
NOTE: Mini AV cable’s L/R audio connections are shared between Y/Pb/Pr
as well.

11
1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS
Controls and Connections (Cont.)
HDMI Connection
HDMI Cable
(not included)
USB Connection
Insert a USB memory device into the USB port for PVR recording,
time-shifting and playback of video/music/photo multimedia files.
USB Device
(not included)
Use a HDMI cable to connect the
unit with other devices to receive
high-definition multimedia signal.

12 1300 886 649 Model: ATVS55-1016 Product Code: 55930 11/2016
www.tempo.org
AUS

Controls and Connections (Cont.)
Component (YPbPr) Connection
YPbPr
Component
Cable
(not included)
Mini AV Cable
(included)
• Your TV contains a YPbPr terminal. You will need to use the special adapter
cable (supplied) with a 3.5mm head on one end and 3 female RCA terminals
on the other end to connect the TV with external devices.
• Then use a YPbPr component cable (not supplied) complete with green,
blue and red terminals to connect to your external device.
• For sound, first connect the Mini AV cable (supplied) to the AV IN 2 socket.
Then connect the white and red jacks on the other end to your external
device.
YPbPr Adapter
Cable
(not included)
