Baumatic SUPREMA1W User manual

SUPREMA1W/SS
DISHWASHER

B
AU
M
ATI
C
SUPREMA1W
/
SS dishwasher user
m
anual
1
IMPORTANT!
BAUMATIC
INSTRUCTION MANUAL
CAREFULLY READING IT BEFORE USING THE DISHWASHER WILL HELP
YOU
USE AND MAINTAIN THE DISHWASHER PROPERLY.
DD 02/11/0707
1
SUPREMA1W/SS – DISHWASHER
60CM FULL HEIGHT DISHWASHER
PLEASE
READ THIS MANUAL AND KEEP IT FOR FUTURE REFERENCE!
THIS MANUAL CONTAINS SECTIONS OF SAFETY INSTRUCTIONS , OPERATING
INSTRUCTIONS
& TROUBLESHOOTING TIPS , ETC.

MINIMUM AND MAXIMUM PLATE SIZES..30
ENVIRONMENTAL NOTE………………………31
CONTACT DETAILS……………………………..32
FINAL CHECKLIST BEFORE STARTING…….29
HOW TO INSTALL ……….…….…..……....24-29
BAUMATIC SUPREMA1W
/ SS dishwasher user manual
2
FROM PROFESSIONAL
WITHOUT GIVING PRIOR
2
PLEASE NOTE:
THE MANUFACTURER
RESERVES THE RIGHT TO MAKE
MODIFICATIONS
TO PRODUCTS
NOTICE.
BEFORE
CALLING
FOR
SERVICE
REVIEWING THE SECTION ON
TROUBLESHOOTING
TIPS WILL
HELP
YOU SOLVE SOME
COMMON
PROBLEMS WITHOUT
THE
NEED TO ASK FOR HELP
TECHNICIANS.
CONTENTS
• SAFETY FIRST!
SAFETY INFORMATION .……………..…………3
*Please read this before using your dishwasher!
• KNOWING YOUR
DISHWASHER
CONTROL PANEL ………………………..……..…4
DISHWASHER FEATURES …………..………….4
• USING YOUR
DISHWASHER
WATER SOFTENER …………………..………...5-6
DETERGENT ………………..............................6
RINSE AID ………………….............................7
LOADING YOUR DISHWASHER…..….......8-11
STARTING A WASH CYCLE ……………….12-14
UNLOADING AT THE END OF A CYCLE…....14
FILTERING SYSTEM ………………..…….…….15
CLEANING AND MAINTAINING
YOUR DISHWASHER …………………….…15-17
• BEFORE YOU CALL FOR
SERVICE…
TROUBLESHOOTING ………………….…18-21
ERROR CODES ………………………………….…22
• MISCELLANEOUS
CHARACTERISTICS ………….………….……...23

AFTE
R
USE
2) Load sharp knives with the handles up to prevent
ONLY USE AUTOMATIC DISHWASHER
AFTER COMPLETION OF WASH CYCLE.
NEVER USE SOLVENTS AS THIS COULD RESULT IN AN
DISCONNECT THE WATER SUPPLY (SEE PP. 17, 26).
BAUMATIC SUPREMA1W
/ SS dishwasher user manual
3
IMPORTANT SAFETY INFORMATION
READ BEFORE USING!
ON ITS DOOR OR DISH RACKS – TIPPING
• KEEP CHILDREN AWAY FROM DETERGENT,
DISHWASHER AS THERE COULD BE
COMPARTMENT OF YOUR OLD APPLIANCE
BEFORE USING
SOME ITEMS ARE UNSUITABLE FOR WASHING
IN YOUR DISHWASHER. PLEASE SEE PAGE 8 FOR A LIST
OF
THESE ITEMS.
DO NOT TAMPER WITH THE CONTROLS.
WHEN LOADING ITEMS TO BE WASHED:
1) Keep sharp items like knives away from the door
seal.
injuries.
• ALWAYS KEEP THE DOOR CLOSED TO AVOID DANGER
OF TRIPPING.
DETERGENT, NOT SOAP OR LAUNDRY DETERGENT.
• CHECK THAT THE DETERGENT DISPENSER IS EMPTY
EXPLOSION!
• IF LEAVING UNUSED FOR A LONG TIME,
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY BEFORE
USING
YOUR DISHWASHER FOR THE FIRST TIME!
3
DURING USE
ELECTRICAL SAFETY
• NOTE - This appliance must be grounded. In
the event of a malfunction or breakdown,
grounding will reduce the risk of electric
shock by providing a path of least resistance
of electrical current. You will be able to tell if
it is because a non-grounded appliance will
give off an electrical discharge.
• Manufacturer declines all responsibility for
any damage due to non-grounding of
appliance.
• DURING THE GUARANTEE PERIOD ONLY BAUMATIC
SERVICE ENGINEERS OR AN AUTHORISED AGENT
OF BAUMATIC SHOULD CARRY OUT REPAIRS ON
THIS UNIT.
• DO NOT USE IF THE SUPPLY CORD IS DAMAGED.
• FOR INSTALLATION PROCEDURE PLEASE CONSULT
PAGES 24 – 29.
CHILD SAFETY
• DO NOT ABUSE OR FORCE THE
DISHWASHER.
DO NOT SIT ON OR STAND
HAZARD.
RINSE AID AND THE OPEN DOOR OF THE
DETERGENT LEFT INSIDE.
• SUPERVISE YOUNG CHILDREN TO ENSURE
THEY
DO NOT PLAY WITH THE APPLIANCE.
• SUPERVISE INFIRM PERSONS IF THEY MUST
USE
THE APPLIANCE.
• REMOVE THE DOOR TO WASHING
BEFORE DISCARDING IT.
• DO NOT USE YOUR DISHWASHER UNLESS
ALL
ENCLOSURE PANELS ARE PROPERLY
IN
PLACE. OPEN THE DOOR VERY
CAREFULLY
IF THE DISHWASHER IS
OPERATING.
THERE IS A RISK OF WATER
SQUIRTING
OUT.
• DO NOT TOUCH THE HEATING ELEMENT
DURING OR IMMEDIATELY AFTER USE.

B
AUMATI
C
SUPREMA1W / SS
d
ishwasher use
r
m
an
u
al
4
CONTROL
PANEL
1
2
3
4
5
6
7
8
9
10
Display Window : Time remaining in Program; delay time; running indicator; temperature of water; fault codes, etc.
Program Indicator Light .
Power On Indicator Light: Comes on when the power is turned on.
Power Switch : Turns the power supply on /off.
Start / Pause Button: Press this button to start or stop the dishwasher.
Program Button: Press this button to select the program you want to run.
Door Lock : Pull it to open the door.
Delayed Start Button: Press this button to set the delayed hours for washing.
Rinse Aid Warning Light: Add more rinse aid as the indicator on the front panel lights up (Certain Models only).
Salt Warning Light : Add more salt as the indicator on the front panel lights up.
WARNING –
B
E
WAR
E
OF
HOT
WAT
E
R
&
ST
E
AM
AS
YOU
OPEN
TH
E
DOOR
!
DISHWASHER FEATUR
E
S
1
2
3
4
Adjustable Upper Basket
Spray Arms
Lower Basket
Water Softener
5
6
7
8
Main Filter
Detergent Dispenser
Cup Shelf
Cutlery basket
9 Coarse Filter
10 Rinse Aid Dispenser
11 Drain Pipe Connector
12 Inlet Pipe Connector
4

DISH
W
ASHER.
SURE NOT TO ADD SALT AND/OR RINSE AID
TO
THE APPLIANCE AS THESE TABLET
MINERALS FROM THE WATER .
INDIVI DUA L CH EMIC A LS AND MA Y CAU SE
BAUMATIC SUPREMA1W
/ SS dishwasher user manual
5
Note on chemicals used by the dishwasher
• Your dishwasher is equipped with an adjustable rinse aid and salt container. Using individual detergents,
rinse
aid and salt will give the best possible results as this will give the correct dosage of each chemical to
suit
your needs. Using Two-in-One or Three-in-One tablets may not give the best results when used in
your
appliance, and may not be suitable for the type of water supply in your home, as they contain pre-
determined
quantities of salt, rinse aid and detergent and cannot be adjusted to the individual
requirements.
If you are going to use 3-in-1 (or 2-in-1) tablets, we suggest that you contact the manufacturer before use
or if you experience poor results in the wash performance and ask for assistance from them.
WARNING!
ONLY USE DISHWASHER SALT IN YOUR
NOTE:
IF YOU USE 3-IN-1 OR 2-IN-1 TABLETS, BE
TYPES ALREADY CONTAIN SALT AND/OR
THE LIME IN HARD WATER MAKES DEPOSITS FORM ON RINSE AID. A DDING S A LT AND RINSE A I D
DISHES AND UTENSILS. YOUR DISHWASHER HAS A
TO YO UR DISHW A S H ER’S CO M P AR T M E N TS
SPECIAL SOFTENING FEATURE THAT USES SALT
I N A C Y C LE INVOLVING A 3- IN -1 OR 2- IN -1
SPECIFICALLY DESIGNED TO ELIMINATE LIME AND
TA B LET WILL RESULT I N OVERDOSING OF
OVERFLOWI N G OF W A TE R AND SUDS.
LOADING SALT INTO THE SALT CONTAINER
• REMOVE THE LOWER BASKET & THEN
UNSCREW
AND REMOVE THE CAP
FROM
THE SALT CONTAINER.
• IF YOU ARE FILLING THE CONTAINER
FOR
THE FIRST TIME, FILL WITH
APPROX.
1 LITRE OF WATER.
• PLACE THE END OF THE SUPPLIED
FUNNEL INTO THE HOLE & ADD 1.2 Kg
OF SALT. NOTE: IT IS NORMAL FOR A
SMALL AMOUNT OF WATER TO COME
OUT OF THE CONTAINER.
5
WATER
SOFTENING
FEATURE

BAUMATIC SUPREMA1W
/ SS dishwasher user manual
6
SETTING THE WATER SOFTENER LEVEL
YOU CAN ADJUST THE AMOUNT OF SALT USED BY THE DISHWASHER TO SOFTEN WATER TO GET
THE BEST WASHING RESULTS, BASED ON THE HARDNESS OF WATER IN YOUR AREA.
2 THERE IS A RING ON THE NECK OF THE
CONTAINER.
ROTATE THE RING IN AN
ANTICLOCKWISE
DIRECTION FROM THE “-”
SETTING
TOWARDS THE “+” SETTING
ACCORDING
TO THE HARDNESS OF WATER
IN
USE. SEE TABLE BELOW.
NOTE
1. THE SALT CONTAINER MUST BE REFILLED WHEN THE
SALT
WARNING LIGHT COMES ON. ALTHOUGH THE
1 UNSCREW THE CAP FROM THE SALT
CONTAINER.
SALT CONTAINER MAY BE FULL, THE INDICATOR LIGHT
MAY NOT GO OUT UNTIL THE SALT HAS DISSOLVED.
2. IF THERE ARE SALT SPILLS, A SOAK PROGRAM CAN
BE
RUN TO WASH AWAY SPILLAGE BEFORE USING THE
MACHINE.
3. CLEAR ANY SALT GRANULES AWAY FROM THE
CONTAINER OPENING.
ADJUSTMENTS SHOULD BE MADE ACCORDING TO THE TABLE BELOW:
WA T E R H ARDN E SS
( c yc l es/ 1 . 2 k g s )
Au t o no m y
Sa l t c on s um pt i on
S e l e c t or P os i t i on
( g r a m / cy cl e)
C l a r ke De g r e e s
mm o l / l
dH
/
0~ 14 0~ 18 0~ 1 . 8 0
/
-
14 ~3 6 18 ~ 44 1 . 8~ 4. 420 60
36
~7 14 4~ 89 4 . 4 ~ 8 . 9 M ED 40 30
C o n t a c t y o ur l oc a l w a t e r b oa r d f or i n f or m a t i on on th e ha r d ne ss o f y ou r w a t e r s up p l y .
+
71 89 8. 9 60 20
“ How much do I use?” DETERGENT
To OPEN the DETERGENT DISPENSER DOOR, use the CATCH on its LOWER SIDE.
*NOTE: SEE P.13 – WASH CYCLE TABLE for AMOUNT of DETERGENT to use .
NOTE:
• ALWAYS CHECK THE WASH CYCLE TABLE
FOR DOSAGE ADVICE. NEVER OVERFILL
THE DISPENSER.
• DO NOT OVERDOSE TO PREVENT THE
FORMATION OF DEPOSITS (THE WATER
SOFTENING FEATURE ALREADY TAKES CARE
OF THIS!).
THE HARDER YOUR WATER, THE MORE DETERGENT
YOU MAY NEED. ADJUST THE DOSE JUST BY SMALL
AMOUNTS UNTIL YOU FIND THE CORRECT AMOUNT
OF DETERGENT TO USE.
6

BAUMATIC
FORMING DROPLETS ON YOUR DISHES
THAT CAN CAUSE SPOTS AND STREAKS. IT
DAMP CLOTH. DON’T FORGET TO REPLACE
THE ‘OPEN’ (LEFT) ARROW AND LIFT IT OUT.
• POUR THE RINSE AID INTO THE DISPENSER.
DISHWASHER DOOR.
‘OPEN’ ARROW & TURN IT TO THE CLOSED
ai d l e ve l i nd i cato r ch a ng es , a s ill us tr a t e d b e l o w .
SUPREMA1W / SS dishwasher user manual
7
• THE RINSE AID IS RELEASED DURING THE
FINAL RINSE TO PREVENT WATER FROM
RINSE AID
ALSO IMPROVES DRYING BY ALLOWING
WATER TO FALL OFF THE DISHES.
• YOUR DISHWASHER IS DESIGNED TO USE
LIQUID
RINSE AIDS. THE RINSE AID
DISPENSER
CAN BE FOUND INSIDE THE
DOOR NEXT TO THE DETERGENT
DISPENSER. TO FILL THE DISPENSER, OPEN
THE CAP AND POUR THE RINSE AID INTO
THE DISPENSER UNTIL THE LEVEL
INDICATOR TURNS COMPLETELY BLACK.
THE DISPENSER HOLDS ABOUT 100ML OF
LIQUID RINSE AID.
• BE CAREFUL NOT TO OVERFILL THE
DISPENSER – THIS COULD CAUSE
• TO OPEN THE DISPENSER, TURN THE CAP TO
FROTHING. WIPE AWAY SPILLS WITH A
THE CAP BEFORE YOU CLOSE THE
BE CAREFUL NOT TO OVERFILL.
NOTE : IF YOU HAVE SOFT WATER, YOU MAY NOT
• REPLACE CAP BY INSERTING IT ALIGNED WITH
NEED RINSE AID FOR IT MAY CAUSE A WHITE FILM
(RIGHT) ARROW.
TO DEVELOP ON YOUR DISHES.
ADJUSTING THE RINSE AID DISPENSER
•
As wi th deter g ent, the amoun t of r i nse
ai
d neede d for your di shes depends on
the
hardness of the w ater i n your area.
T oo much rinse aid can result in
foaming
and cause cloudiness or
streaks
on your dishes . If your w a t er
i s very soft, you may no t need r i nse
aid.
You can always dil u t e t he r i nse
aid
wit h an equal amoun t of water.
The rinse aid dispenser has six settings. ALWAYS START WITH THE DISPENSER SET ON “1”. IF SPOTS & POOR
DRYING ARE A PROBLEM, INCREASE THE AMOUNT OF RINSE AID DISPENSED BY REMOVING THE DISPENSER
LID AND ROTATING THE DIAL TO “2”. IF THE DISHES ARE STILL NOT DRYING PROPERLY OR ARE SPOTTED,
ADJUST THE DIAL TO THE NEXT HIGHER NUMBER UNTIL YOUR DISHES ARE SPOT-FREE .
*** NOT E: Pleas e re ad t he not es for deter gen t use on p. 13.
WHEN TO REFILL THE RINSE
A s t h e ri ns e a i d d i m i n i sh e s , t h e s i z e o f t h e b l a ck do t on t h e ri n se
AID DISPENSER - If the rinse aid
F u ll
warning light ( SEE control panel) is not on, you 3 / 4 f u ll
can judge the rinse aid level by looking at the
1 / 2 f u ll
black dot on the rinse aid dispenser. As the
1 / 4 f u ll - S hou l d r e fill t o e li m i n a t e spo tti ng
rinse aid level decreases, the black dot shrinks.
E m p t y
Never let the rinse aid get below ¼ full.
7

BAUMATIC SUPREMA1W
/ SS dishwasher user manual
8
LOADING
NOT E:
YOUR
F OR BEST PE RFORMA NCE , FOLLOW TH ESE
L
O ADING GUID E LINES. FEATUR E S AND
APPEARA
NCE O F RACKS & C UTLERY
BASKETS
MA Y VA RY FROM YOUR MODEL.
DISHWASHER
BEFORE LOADING!
• REMOVE ALL SCRAPS OF FOOD.
• E MPTY DRINKS & LIQUIDS FR OM C U PS .
• SOFT E N BURNT-ON FOOD IN PAN S BY SOAKIN G.
DO T N YOUR DISHWASHERNO PUT THESE ITEMS I :
• BRONZE • OLDER • STEEL ITEMS
CUTLERY CUTLERY SUBJECT TO
WITH GLUED RUSTING
• SAUCEPANS PARTS
WITH • WOODEN
WOODEN PLATTERS
HANDLES • BONDED
CUTLERY
• CUTLERY ITEMS OR • ITEMS MADE
WITH DISHES FROM
WOODEN, SYNTHETIC
HORN, CHINA FIBRES (eg.
OR MOTHER • PEWTER OR SPONGES)
OF PEARL COPPER ITEMS
HANDLES
• DELICATE,
• PLASTIC • LEAD CRYSTAL REPAIRED OR
ITEMS THAT GLASS PAINT /
ARE NOT HEAT PATTERN
RESISTANT OVERLAID
CHINA
Note :
Do not wash stainless steel and silver cutlery together. Iron objects can rust
and
stain other items. Aluminium tends to go black. Copper, pewter & brass
stain.
8

BAUMATIC
COOK W
A
RE
SO
THAT THE
Y
DO N O T
WA T ER.
ALWAYS
PL
A
C E GLASSES,
OR
TH E
HIGHER
LE VEL
(POSITION ‘2’ IN
SUPREMA1W / SS dishwasher user manual
9
HOW TO USE THE UPPER RACK
THE UPP ER RACK IS F OR M ORE D E LICATE
AND
LIGHTER DISHWARE SU CH AS
GLASSES,
CO FFEE & TE A CUPS, SAUCERS,
P LATES, BOWLS, AND SHALLOW PANS
(PRO VIDED TH ESE AR E NOT TOO DIR TY ).
POSITION T HE D ISHES A N D
GE T M O V ED BY THE SP RA Y OF
CUPS & BO WLS UPSID E DOWN.
NOTE :
YOUR DISHWASHER COMES WI TH AN
ADJU STAB LE TOP RA CK (BA S K E T ) –
PICTURED
AT R I GH T . I T S HEIG HT CAN
BE
ADJUS T ED BY U N DO IN G THE FR ONT
RA IL CLIP S, REMOVING THE RA CK
COMPLETELY
AND LATCHING THE
WHEELS OF TH E LOWER LE V EL
(POSITION ‘1’ IN THE FIGURE ON THE RIGHT)
1
THE FIGURE ON THE RIGHT) IN THE GR OOV E
OF
THE RA IL.
2
9

BAUMATIC SUPREMA1W
/ SS dishwasher user manual
10
***N O TE *** : T HE UPPE R RACK HAS
SI DE FLAPS (PICTURED AT LEFT ABOVE BASKET) .
TH ERE ARE 4 (2 ON EA CH SIDE) .
TH ESE CAN BE ADJUSTED INT O 2
POSITION S = POSITION 1 (H IGH)
A N D POSITION 2 (LOW).
TO MOVE THE FLA P S BETWEEN THE S E
PO
SITIONS, FIND TH E LARGE HINGES
CLASPING
EA CH FLAP T O TH E UPP ER
RA
CK . THERE A RE TWO OF TH ESE AT
EIT
HER END OF E A CH FLA P . GENT L Y P ULL
B
OTH C LAS P S O FF THE WI RE RA C K A N D
M
O VE THE FLAP TO THE DESIRED
PO SI T I ON . BE CAR EFUL IF YOU HA VE
LO NG F ING ER NAI LS!
POSITION 1
THE UPPER POSITION WILL ACCOMMODATE ITEMS SUCH AS GLASS TUMBLERS
(PLACED
BENEATH FLAP) AND WINE GLASSES. WINE GLASSES CAN BE PLACED
UPSIDE
DOWN SO THAT THE NECK NESTLES SNUGLY IN THE GROOVES AT SIDE OF
FLAP
WITH THE BASE OF THE GLASS FACING UPWARD.
POSITION 2
WHEN THE FLAPS ARE MOVED TO THE LOWER POSITION, THEY CAN BE USED TO
HOLD
ADDITIONAL TUMBLERS, CUPS AND MUGS. ALWAYS CHECK THAT YOU ARE
ONLY
PLACING ITEMS ON THE FLAPS THAT WILL CLEAR THE CEILING HEIGHT OF
YOUR
DISHWASHER WHEN YOU PUSH THE RACK BACK IN. BE PARTICULARLY
CAREFUL
WITH LONG-STEMMED GLASSWARE SUCH AS CHAMPAGNE GLASSES –
BREAKAGE HAZARD!
10

BAUMATIC SUPREMA1W
/ SS dishwasher user manual
11
NOTE
:
• WHEN YOU ARE SATISFIED YOU HAVE LOADED ALL THE UTENSILS
AND
DISHES YOU WANT TO WASH AND HAVE ADDED THE PROPER
AMOUNT
OF DETERGENT TO THE DISPENSER (REMEMBER TO CHECK THE
TABLE
ON PAGE 13 FOR THE DOSE THAT’S RIGHT FOR THE WASHING CYCLE YOU
WANT),
ENSURE THE RACKS ARE PUSHED ALL THE WAY BACK INTO
YOUR
DISHWASHER AND CLOSE THE DOOR.
• YOU ARE NOW READY TO START A WASH CYCLE (SEE NEXT PAGE).
11

BAUMATIC SUPREMA1W
/ SS dishwasher user manual
12
STARTING A WASH CYCLE
1
2
10
9
8
7
6 5 4 3
STARTING A WASH CYCLE
1) MAKE SURE THAT THE PLUG OF THE APPLIANCE IS INSERTED INTO THE WALL SOCKET.
2) MAKE SURE THAT THE WATER SUPPLY IS TURNED ON TO FULL PRESSURE.
3) LOAD THE DISHWASHER (SEE THE SECTION ENTITLED ‘LOADING YOUR DISHWASHER’).
4) POUR IN DETERGENT (SEE THE SECTION ENTITLED ‘SALT, DETERGENT & RINSE AID’).
5) TURN THE KNOB LOCATED ON THE RIGHT OF THE CONTROL PANEL CLOCKWISE UNTIL THE NUMBER OR
THE
SYMBOL FOR THE CYCLE SETTING IS ALIGNED WITH THE REFERENCE MARK (SEE THE SECTION
ENTITLED
‘WASH CYCLE TABLE’ ON NEXT PAGE).
6) PRESS THE ‘ON/OFF’ BUTTON. THE ON/OFF LIGHT WILL COME ON. THE WASH CYCLE WILL NOW BEGIN.
Note :
The Delay Timer key (in above figure as mark number ‘6’) will set the start of the
washing
cycle by 30mins into the future for every press. You can set it up to 9½
hours
ahead of time for your convenience.
Approximate Timing of Wash Cycles
Intens
i ve
12
(strong) 139
mins.
Normal Economy
150
mins.
Rinse
95
mins.
Glass
76
mins.
Soap
103 7
mins. mins.

BAUMATIC SUPREMA1W
/ SS dishwasher user manual
13
WASH CYCLE TABLE
OVERFLOW PROTECTION
YOUR BAUMATIC DISHWASHER HAS AN OVERFILL PROTECTION DEVICE WHICH AUTOMATICALLY SHUTS OFF
THE
INLET VALVE AND STARTS THE DRAIN PUMP IF THE WATER OVERFLOWS . IF THIS OCCURS THEN TURN OFF
THE
MAINS WATER SUPPLY BEFORE CALLING THE SERVICE DEPARTMENT. IF THERE IS WATER IN THE BASE
PAN
BECAUSE OF AN OVERFILL OR SMALL LEAK , THE WATER SHOULD BE REMOVED BEFORE RESTARTING THE
DISHWASHER
13

BAUMATIC SUPREMA1W
/ SS dishwasher user manual
14
WHAT YOU WILL SEE ON THE DISPLAY:
Digital sign: Shows the delayed time, remaining time and fault codes.
Delay sign: Shows this sign when delaying.
Washing sign: Displays this sign when washing.
Running sign: Display shows this when your machine is running a cycle.
Doesn’t
flicker when stopping.
Temperature sign: Shows the wash temperature at any time.
FORGET TO ADD A DISH?
A FORGOTTEN DISH CAN BE ADDED AT ANY TIME BEFORE THE DETERGENT
DISPENSER
OPENS.
• OPEN THE DOOR A LITTLE TO STOP THE WASHING.
• AFTER THE SPRAY ARMS STOP WORKING, YOU CAN OPEN THE DOOR
COMPLETELY.
• ADD FORGOTTEN DISHES.
• CLOSE THE DOOR, THE DISHWASHER WILL WORK AFTER TEN
SECONDS.
Need to Change the Cycle?
1. PR ESS THE PO WER SWIT CH TO STOP WAS H I NG
2. PR ESS THE ‘PR O G.’ BUTTON TO SELE CT THE NEW PROGR AM
3. PRESS THE PO WER SWIT CH AGAIN TO STA RT WASHING
* Note – Yo u may hav e to start a new c y c l e by reloadi ng the de terg en t
if it has been a lo ng time sinc e the old c y c l e began. See pa ge 12 to see
h
o w to do this.
At the End of the Wash Cycle
At end of washing, the time display will flash for 8 seconds while the ALARM
sounds.
The ALARM will not sound at the end of delayed washing, howeve
r
We recommend you leave about ½ hour before unloading to
avoid injury and brittleness in dishware from heat.
14

BAUMATIC SUPREMA1W
/ SS dishwasher user manual
15
FILTERING SYSTEM
FOR YOUR CONVENIENCE, WE HAVE PLACED THE FILTERING SYSTEM WITHIN EASY REACH INSIDE THE
TUB. THE FILTER REMOVES BITS OF FOOD TRAPPED IN THE FILTER FROM THE WASH WATER SO IT CAN BE
RECIRCULATED DURING THE CYCLE. THERE ARE THREE PARTS TO THE FILTERING SYSTEM: 1) The Main Filter,
2) The Coarse Filter & 3) The Fine Filter .
1 MAIN FILTER
Food and soil particles trapped by this filter are
pulverized
by a special jet on the lower spray arm and
washed
down the drain.
2 COARSE FILTER
Larger items, such as pieces of bone or glass that could
clog
the drain are trapped in the coarse filter. To
remove
an item caught in this filter, gently squeeze
the
tabs on top of this filter and lift it out.
3 FINE FILTER
This filter holds soil and food residue in the sump area
and
prevents it from being re-deposited on the dishes
during
a cycle.
Caring for your Dishwasher
CLEANING THE OUTSIDE SURFACES OF YOUR APPLIANCE
• TO CL E A N THE EXTERIOR O F YOUR DISHWASHE R (INCLUDING THE CONT ROL PANEL), USE A LIG HT L Y
DAMP ENE D CL OTH THEN D RY THOR OU GH L Y . NEV ER USE SH ARP OBJECTS, SC OUR ING PADS OR
HARSH
CLEAN ERS ON ANY PART OF THE APPLIANCE. SOME PAPER TOW ELS CAN SCRATC H.
• TO CLEAN THE EDGE AROUND THE DOOR,
ONLY
EVER USE A SOFT WARM, DAMP RAG.
DO
NOT USE A SPRAY CLEANER HERE OR
WHEN
CLEANING THE DOOR PANEL AS THIS
MAY
HARM THE DOOR LOCK AND
ELECTRICAL PARTS.
CLEANING THE SPRAY ARMS
THE SPRAY ARMS NEED REGULAR CLEANING AS HARD WATER RESIDUES WILL CLOG THEIR
JETS
& BEARINGS. TO REMOVE THE SPRAY ARM, SCREW OFF THE NUT TO TAKE OUT THE
WASHER
ON TOP OF THE SPRAY ARM AND REMOVE THE ARM. WASH THE ARMS IN SOAPY
WARM
WATER & USE A SOFT BRUSH TO CLEAN THE JETS. REPLACE THE SPRAY ARM AFTER
RINSING
IT THOROUGHLY.
15

BAUMATIC SUPREMA1W
/ SS dishwasher user manual
16
CLEANING THE FILTERS
• THE FIL TER ASSEMBLY MUST BE KEPT CLEAN F OR BES T PE RF OR MANCE. You shou ld remove the
l arger bi ts of food trapped i n t he fil t er af t er each w ash cycle b y rins i n g the semic i rcular f ilt er an d
cu p under runn i n g w a t er. To re mov e t he f ilt er a ssemb ly , pu ll up on t he cup h a nd l e .
• The entire filter assembly should be cleaned at least once a month.
• To c l ear the coarse fil t er and t he fine fi lt er, use a c l eaning b rush. T hen, reassemble the filter parts
as shown in t he figure above and re i nsert the ent i re assembly i n the di shwasher i n it s seat & press
downward
t o secure it .
• Improper re pl acemen t of the fil t er may i m p a i r ap pli ance performance and d amage di shes and
utensils.
• Warning - never run the dishwasher without the filters
in place!
• Warning - Before cleaning the inner cavity of the appliance
always allow 30 minutes for the Element to cool down to
avoid injury!
16

BAUMATIC SUPREMA1W
/ SS dishwasher user manual
17
HOW TO KEEP YOUR DISHWASHER IN SHAPE
A FTER E VERY W ASH , leave the door slightly ajar so that moisture and odours are not trapped
inside.
R EMOVE THE P LUG before cleaning or performing maintenance. Never run the risk of electric
shocks.
D O N OT U SE S OLVENTS OR A BRASIVE C LEANING A GENTS to clean the exterior and the rubber
parts of the dishwasher. Only use a cloth and warm soapy water. To remove spots or stains
from
the surface of the interior, use a cloth dampened with water and a little white vinegar,
or a cleaning product made specifically for dishwashers.
W HEN YOU G O ON H OLIDAY , run a wash cycle with the dishwasher empty. Then unplug it, turn off
the water supply and leave the door slightly ajar to prevent odours and mould from developing.
M OVING THE A PPLIANCE is possible but KEEP IT UPRIGHT.
S EALS can trap food, which in turn will cause odours. Periodic cleaning with a damp cloth or
sponge
will prevent this from becoming a problem.
PROTECTING
OUR ISHWASHER AGAINST REEZINGYDF
If your dishwasher is left in an unheated place during the winter, ask a
service
technician to :
1) Cut o ff elect r ical power to th e di shwasher. Rem ove fuses or tri p ci rcu it
break
er.
2) Tu rn o ff t he water supp ly and disconnect the w ater i n let pipe from th e water
valv
e & di sch a rge hoses.
3) Drain wat er fr om the inl e t pipe a nd wat er valv e (Use a pa n to catc h t he
wat er).
4) Reconnect t he wate r i n l e t pipe to t he wate r valve.
5) Remove the plastic sump c ov er in the tub bottom and use a sp onge to soak
up wate r in t he rubber b oot.
17

BAUMATIC SUPREMA1W
/ SS dishwasher user manual
18
BEFORE YOU CALL FOR SERVICE …
CHECKING AGAINST THE CHARTS BELOW MAY FIX YOUR PROBLEM.
PROBLEM POSSIBLE CAUSES WHAT TO DO
• Replace fuse or reset circuit
breaker.
• Fuse blown, or the
circuit
breaker acted • Remove any other appliances
feeding
from the same socket as
the dishwasher.
Dishwasher
doesn’t run!
• Power supply is not
turned on
on and the door is closed securely.
• Make sure the dishwasher is turned
• Check that the water supply is
connected properly and the water is
turned on.
• Water pressure is low
• The system is designed to detect an
overflow. When it does, it shuts off
Drain Pump
doesn’t stop!
• Overflow the circulation pump and turns on
the drain pump. Call a Baumatic
Ltd approved technician.
action and detergent cup opening.
• Sound from soft food shredding
• Some audible sounds
are
normal
This is not a problem.
• Utensils are not secure
in the baskets or
something small has
dropped into the
securely in the dishwasher.
• Ensure everything is placed
Noise!
basket and is loose
• Dishwasher has not been used
regularly. If you do not use it
often, remember to set it to fill and
• Motor Hums
pump out every week. (See Wash
Cycle table). This will help keep the
seal moist.
18

BAUMATIC SUPREMA1W
/ SS dishwasher user manual
19
PROBLEM POSSIBLE CAUSES WHAT TO DO
detergent to avoid suds.
• Use only special dishwasher
Suds in the Tub!
• Improper detergent
immediately.
• Always wipe up rinse agent spills
• Spilled rinse agent
Stained tub
Interior!
• Detergent with
colorant was used
• Make sure you use detergent
without colorant.
Dishes are not
dried!
• Rinse agent dispenser
is empty
• Make sure that the rinse agent
dispenser is filled.
Dishes and
Flatware not
Clean!
• Improper program • Select stronger program.
• Make sure there are no large dishes
blocking the action of the detergent
dispenser
and the spray arms.
• Improper rack loading
To remove spots from glassware:
Spots and Filming
on Glasses and
Flatware!
1. Take all metal utensils out of the
• Extremely hard water
dishwasher.
• Low inlet temperature
2. Do not add detergent.
• Overloading the
dishwasher
3. Choose the longest cycle.
4. Start the dishwasher and let it to run for
• Improper loading
18 - 22 minutes, then it will be in the main
• Old or damp powder
detergent
wash.
5. Open the door and pour 2 cups of white
• Empty rinse agent
vinegar into the bottom of the dishwasher.
dispenser
6. Close the door and let the dishwasher
• Incorrect dosage of
detergent
complete the cycle.
7. If the vinegar does not work, repeat as
above, only use ¼ cup (60ml) of citric acid
crystals
instead of vinegar.
19