Baumatic BCD71 User manual

Tumble Dryer
OWNER’S MANUAL
Before using your tumble dryer, please read this
manual carefully and keep it for future reference.
Inside you will find many helpful hints on how to use
and maintain your tumble dryer properly. Just a little
preventative care on your part can save you a great
deal of time and money over the life of your tumble
dryer. You’ll find many answers to common problems
in the chart of troubleshooting tips. If you review the
chart of troubleshooting tips first, you may not need
to call for service.
Read This Manual
BCD71

Dear Customer,
Congratulations on purchasing your new product from Think Appliances.
To register your parts and labour warranty (some conditions apply please refer to your
warranty card for more details) please contact out Customer Care team on:
1800 444 357
Our Customer Care centre is there to ensure you get the most out of your appliance. For
example, should you want to learn more about recommended cooking temperatures, the
various cooking functions available, how to set and program your LED clock, and importantly
taking care of your appliance when cleaning, please call us because we are here to help you.
It is important that you read through the following use and care manual thoroughly to
familiarize yourself with the installation and operation requirements of your appliance to
ensure optimum performance.
We also carry a complete range of spare parts for all Think products. For all your spare parts
enquiries please contact our team at Pronto Parts on:
1300 306 973
Again, thank you for choosing an appliance brought to you by Think Appliances and we look
forward to being of service to you.
Kind regards
Management
Think Appliances

Contents
Safety information..............................................................................
Installation.........................................................................................
Part description.................................................................................
Attention and advice..........................................................................
Description of controls.......................................................................
Operation instruction.........................................................................
Programme table...............................................................................
Cleaning and routine maintenance..................................................
Alarm function..................................................................................
Precautions......................................................................................
Technical specifications...................................................................
Specialty drying function...................................................................
4
6
7
9
12
13
14
15
10
8
1
3

Dry
Dry clean Do not dry clean Dry clean normal cycle
with any solvent
Normal Not tumble dry normal
Do not dry
Dry flat
Drip dry
Line dry / hang to dry In the shade
Dry Care Symbols
Please pay attention to use the drying machine if the materials of your clothes can not be dried by it
or contain the symbols as follows:
Safety information
To prevent any damages to your and others' life or property, you
1.This product belongs to Category I electrical appliances, and only for drying
textiles which have been washed with water in the household. Please pay
safety of power use during the operation!attention to the
2.The power source with reliable earthing must be used. Its earth wire must be
buried under the ground and shall not be connected with the public utilities such
pipe or gas pipe etc. The earth wire and null wire shall be as city water
not be connected together.distinguished and shall
3.The power wire shall meet national standard and must be able to withstand
current above 16A. To ensure your and your family's safety, please makethe
immediately if any power use at your home does not comply with
improvement
requirements.the above-mentioned
Safety notes
1.If the power cable is damaged, it must be replaced by the manufacturer, its
service agents or similarly qualified persons in order to avoid a hazard.
2.Do not draw the power cable forcefully to pull out the mains plug.
3.Please do not plug/draw the mains plug with wet hands.
4.Do not damage the power cord and the power plug.
5.To prevent any accidental electric shock, please make sure the mains plug of
the dryer is earthed. DO NOT USE AN EXTENSION CORD
!
have to follow the safety notes.
1
Electric shock hazard
A
F
Dry clean normal cycle
petroleum solvent only

2
3.Please do not lean on the opened door of the dryer.
4.Please do not put any pyrotoxin on the dryer, such as the candle, electric cooker.
5.Children should be supervised to ensure that they do not play with the appliance.
6.This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Damage danger
1.Please do not dry over the regulated capacity.
2.Please do not operate the dryer without the lint filter and air condenser.
Safety information
Please do not dry the clothes with some flammable substances such as the coal oil,
or there will be the explosion.
alcohol
When you want to dump the dryer because it is not operable or not worth of
repairing, please pull out the mains plug and cut the power cable. All the material
used for this machine is environmental-friendly and recyclable. Please help the
disposal of the material via environmental-friendly means.
3.Please do not dry clothes before they have been spun in a washing machine.
4.Please do not expose the dryer directly under the sun, and indoor use only.
5.Please do not install the dryer in the humid and drenching environment.
6.Please do not keep any object in the pockets of your laundry before drying process.
7.At the cleaning and maintenance, please do remember to pull out the power
plug and do not directly wash the dryer with water.
Explosion danger
Notes on disposal
Guidelines
Move cautiously. Do not grasp any salient parts of machine. The machine door
can not be used as the handle for delivery.
2.Please do not stack this dryer on washing machine without stacking kits.
1.Please do not disassemble and install the dryer under no instruction or supervision.
Injury danger
7.The tumble dryer is not to be used if industrial chemicals have been used
for cleaning and lint must not to be allowed to accumulate around the
tumble dryer.

3
Installation Position
1.Please install the dryer on solid and flat ground.
2.Please do not place the dryer on the slope, soft carpet or wooden floor.
3.Please do not install the dryer outdoors, to prevent the dryer from being frozen to
damage of machine parts.
Installation
Level Adjusting
If the floor is obviously uneven, it needs to be adjusted. It vibrates the machine,
causing machine to move from its position.
Using hands to adjust the height of four machine legs to adjust the levelness of
this dryer.
Power Supply Connection
1.Make sure that the voltage of the power supply is the same as the electric
of the dryer.specification
2.Please replace it by the professional if the power supply wire is damaged, and
the power wire from the manufacturer or the customer service center can be only
3.Please do not connect it with a power board or double adaptor
4.Please do not connect the power supply with wet hands.
5.Please do not pull out the plug by pulling the power wire with force
used.

4
Part Description
Part Description
Container
Control Panel
Door
Maintenance flap
Condenser
Lint filter
Power Cord
Accessories
The following parts are optional for specific models.
Condensing drain hose(optional) Hose holder(optional)
If your dryer has following parts, please them
instruction below .
install following the

Quick start
2 Close the machine door
5. Press the [start/pause] button
3 Plug the power cord
1. Open the door and
load the laundry
4.Select the desired programme
9.Unplug the power cord
8.Turn the knob to “OFF”
7. Clean the lint filter and
empty container
6. Take out the laundry
when finished
5
Part Description
Max.120cm
Min.80cm
200cm

6
Before the first cycle, the dust and grease may remain in this dryer during the
transportation, to avoid contaminating your clothes,period of manufacture and
a)Put some clean rags into the drum.
b)Plug the power.
c)Select the “Quick” Programme, press “Start/Pause” button.
d)After finishing this programme, please follow the “cleaning and routine
maintenance” to clean the lint filter and air condenser.
1．Before drying, thoroughly spin the laundry in washing machine. High spin
speed can reduce the drying time and save energy consumption.
2．For uniform drying result, sort the laundry according to fabric type and drying
programme.
3．Before drying, please close zips, hooks and eyelets, button up, tie fabric belts, etc.
4．Do not over dry the clothes, because over dried clothes can easily get creases
5．Do not dry the articles containing rubber or similar elastic materials such as
bicycle covers and feather products.raincoats,
6．The door can be opened only after the programme of the drying machine is
Do not open the door before the programme finished to avoid the completed.
human skin from being scalded by hot steam or over heated drying machine.
7．Clean the lint filter and empty container after each use to avoid extension of
Attention & Advice
9. The weight references as follows:
Blended Coats
(about 800g)
Jackets (about
800g in cotton)
Towel Quilts
(about 900g
in cotton)
Shirts (about
300g in cotton)
Work Clothes
(upper and lower)
(about 1120g in
cotton)
Underpants
(about 70g in
cotton)
Undershirts
(about 180g in
cotton)
Single Sheets
(about 600g in
cotton)
Jeans Trousers
(about 800g)
Pajamas
(about 200g)
Socks (about 30g in
blended material)
or shrinkage.
drying time and energy use.
Attention
8．Do not dry these clothes after dry-clean process.
please follow these steps:
Advice

Cycle
Different Dryer cycle can be selected
according to the user's needs to make
the clothes have more effective drying result.
Start/pause
【Start/Pause】button，has the
start and pause function. When this button is pressed, this machine is
switched between start and pause.
This function will give more
Anti-Crease
This function is used to delay
drying process .
You can get
1-24hour by pressing this key
Delay/Light
This function will give
less heat to protect sensitive
textiles from high temperature.
Gentle
Please empty the container
when the“ ” is flashing,
after the dryer stops.
Tank
continuously . The drum light will activate when
you press the【Delay/Light】
during the drying procedure.
care to protect sensitive
textiles from being creased.
2
Digital tube display
Only light ( DELAY / REMAIN ) relevant to the phase that is currently
being carried out will remain display during the drying process.
time, that is, the drying procedure will finished in【x:xx】time.
When the drying procedure begins, REMAIN will display the remaining The display “- - -”means programme in “hibernation” status, you can
press any buttons or open the door to awaken programme.
The four LED lights indicate
Please clean the filter when
the“ ” , is flashing after the
Fliter
dryer stops.
the status of the drying
Status display
Description of controls
procedure.
7

1.Rotate the programme knob to select the desired programme.
2.Select the Delay , Anti-Crease or Gentle functions for additional option.【 】 【 】 【 】
3.Press the Start/Pause key.【 】
The Drying procedure stops
The buzzer will prompt from the dryer when finishing the cycle.
Rotate the programme knob to the “OFF” position, and pull out the power cable.
Programme selector
Consumption values
Specifications are approximate values determined under normal conditions.
Fluctuations up to 10% are possible.
8
Operation Instruction
Note:
Some jeans and large towels are difficult to dry ,due to its material
features, if you find them are still wet, please use【WARM】
programmme to dry them again.
70%
Synthetics 50%
50%
70%
60%
50%
60%
7.0
3.5
Weight
Programme
40%
Residual humidity
( approx.) Energy consumption
( kWh)
4.3
5.0
3.6
4.2
3.7
3.8
1.2
1.6
(kg)
Cotton
(standard)
Cotton
(iron)

Programme table
Programme Weight(max)
3.5kg
For cottons and coloureds made of cotton or linen.
For non-iron washing made of synthetic and blended fabrics,cotton.
3.0kg For machine-washable woollen textiles.Textiles are fluffer,but not dried.
Remove and hang up textiles when the programme ends.
3.0kg 3.0kg
For washing which is to be dried quickly, e.g. made of acrylic fibres or for individual
small items. Also for subsequent drying.
For timer programme , delicate textiles made of acrylic fibres or small items.
T-Shirt
Skirts/
dresses
Work
clothes Anorak Underwear Socks Bed linen
Table linen
Terry
towels
Towelling
bathrobe
Shirts Trousers
Sportswear
7.0kg
Using Time Adjusting “+” “-” function to adjust time.【 】
Cotton
Extra
Extra
Quick
Tea towels/
hand towels
Delicate
Synthetics
Standard
Light
Standard
Iron
Light
9
(30min/20min)
Warm/Cool

1. Instruction of the moisture sensor
This function can automatically sense the moisture of clothes, and will
adjust the time of drying procedure according to how much clothes automatically
This function will automatically activate during the drying procedure except the
and “Cool” programme.“Warm”
2. Additional time adjusting function
This function can set the time of drying procedure by your self; the time can be
adjusted from 20 to 40 minutes by press“＋” or “－” buttons. This function is
ORad, for example, one facecloth or two pairs designed for a small
to control drying process, but only for “Warm” andof socks. It's like using timer
3. Instruction to the delay drying procedure
This function is used to delay clothes drying within 24 hours. You can press this
key continuously; it can be selected within 1-24 hours. The delay time means
drying procedure will start in x:xx hours.
When the delay procedure starts, the display will only show the delay start time
Steps in details
(1).Load your laundry and make sure the machine door is closed.
(2).To turn the programme selector knob and select a desired programme
(3).You can select the 【Anti-Crease】 or 【Gentle】functions according to your
(4).To press the 【Delay/Light】 key;
(5).Continue to press the 【Delay/Light】to select the delay time;
(6).After the 【Start/Pause】 key is pushed, the Dryer is at the run condition.
The drying procedure will be automatically performed when the delay time is over.
(7).If you push the【Start/Pause】button again, the delay function will be paused.
(8).If you want to cancel the “Delay” function, please turn the programme
knob to “OFF”and reselect the programme .selector
Specialty drying function
and light DELAY icon.
Specialty drying function
10
“Cool” programme.
4. Instruction of the child safety feature
(1).This machine incorporates a special child safety lock, which can prevent
from carelessly pressing keys or making the faulty operation.children
need;
(2).When the dryer is at the operation state, press the【Delay/Light】and
【Anti-Crease】buttons at the same time for over 3 seconds to start child lock
function. When child lock function is set, the display will light “Child Lock”
you put into the dryer.

5. Instruction of the Anti-Crease function【 】
When the anti-crease function is selected, the LED of anti-crease shall illuminate,
and the drum will intermittent rotate during the drying programme , in older to
give more care to ensure the can not get crease. sensitive textiles
6. Instruction of the Gentle function【 】
When the Gentle function is selected, the LED of Gentle shall illuminate, and the
programme will give less heat to protect sensitive textiles from high temperature
which may harm to these textiles, such as acetate, elastane and etc.
7. Instruction of the drum light
For your convenience, this function can help you to see clearly when you open the
machine door, and the drum light will also activate when you press the
【Delay/Light】during the drying procedure.
11
Under the start state of the child lock button, the【Delay/Light】and
【Anti-Crease】buttons shall be pressed at the same time for over 3 seconds to
icon and no key can effect to the dryer.
release the child lock function.
Special drying function
8.Instruction of the Auto Anti-crease function
To avoid the clothes creasing after the programme finished, the dryer will
automatically intermittent rotate about 2 hours.

-Leave the dryer to cool down.
-Residual water may escape,place an absorbent
cloth under the maintenance flap.
1.Unlock the maintenance flap.
2.Completely open maintenace flap.
3.Screw both locking levers towardas each other.
4.Pool out the air conderser.
Do not damage the air conderser!
1.Clean with warm water only;do not use
hard/sharp-edged objects! Do not operate
the dryer without the the air condenser !
5.Clean the air conderser completely,drain thoroughly.
6.Clean the seals.
7.Re-insert the air conderser,handle at the button!
8.Unscrew both locking levers.
9.Cloth the maintenance flap until it locks into position.
Please clean the air condenser if frequently used.
Clean the lint filter
Cleaning and routine maintenance
will cause the extension of drying time and energy use; therefore, the scrap
thread filter shall be cleaned after each use.
Leave the dryer to cool down.
1.Open the machine door.
2.Take out the lint filter, pull upward to take it out.
3.Clean the lint filter; wipe off the scrap threads
4.Reinstall the lint filter.
1.The lint filter accumulated on the filter will block the air circulation, which
2.Do disconnect the power cord before cleaning!
3.Do not operate the dryer without the lint filter !
4.Clean the lint filter after each use to prevent lint accumulation inside the dryer.
NOTE!
Wash air condenser
12
accumulated on the lint filter.
2.During drying, water may collect between the window
and the seal, but this does not affect the function of your dryer!

Alarm function
Alarm function
13
“ ”E30
“ ”E32
“ ”E33
“ ”E34
“ ”E60
Check the water tank and pump.
Check the filter and the air folw
Check the heater and the thermostat
Check the Humidity sensor and PCB
Check the front temprature sensor
Check the rear temprature sensor
Check the motor and the PCB
Alarm Problem Alarm Reason Buzzer Alarm Release
Water tank full or pump
error
Air flow block
Heater problem
Humidity sensor error
Temprature sensor error
Motor error
The Error Code is
flashing on X:XX
at Flash Rate 1.
Meanwhile the
beep is sounded
every 1 5 minutes.
“ ”Is flashing
“ ”Is flashing

Precautions
Precautions
14
Repairs may be carried out by customer service of authorised
technicians only!
Before you call customer service, please check whether you can correct the
fault yourself.
A technician will charge you for advice, even during the warranty period.
Clean lint filter and wash condenser.
Empty container.
Check water outlet.
Dryer installation too restricted.
Clean the moisture sensors.
Use next higher drying programme or using
Timer programme.
“ ”Is flashing “ ”Is flashing
“ ”Is flashing
Check the clothes is over load .
Problem Solution
Display does not
come on
The mains plug is inserted.
Check the programme selected.
Check fuse in the house.
Empty condensation container.
If failure, check hose for condensation outlet.
Clean air cooler.
Clear lint filter.
Dryer does not start
Check the has selected
Check the the door has closed.
Check the programme has set.
start button .
Water is running out Align dryer horizontally.
Clear air condenser and door seals.
Door is open by itself Press door until it “clicks”into position.
Degree of dryness was
not reached or drying
time too long
Humidity in the room is
increase significantly
Ventilate room adequately.
Clean the cool grille.
Ensure that the air condenser has been inserted.
If you cannot correct a fault yourself or if a repair is required:
1.Set programme knob to OFF.
2.Pull out the mains plug and call the service.

Specification
Technical Specification
Overall Size
Net Weight
Rated Drying Capacity
Rated Frenquency
595×565×845(mm)
43kg
50Hz
7.0kg (Dry Clothes)
Power supply voltage 220-240V~
Rated input Power 2000W
15

(AUS)
Think Appliances Pty Ltd.
416-424 Barry Rd
Coolaroo VIC 3048
Sales Telephone
1300 132 824
Service Telephone
1800 444 357
Website
www.thinkappliances.com
(NZ)
Applico Ltd.
Private Bag 92900
Onehunga, Auckland,
New Zealand 1061
Website
www.baumatic.co.nz
(UK)
United Kingdom
Baumatic Ltd.,
Baumatic Buildings,
6 Bennet Road,
Reading, Berkshire
RG2 0QX
United Kingdom
Sales Telephone
[phone]
Website:
www.baumatic.co.uk