Classic Exhibits Symphony SYM-408 Manual

© 2020
Locked layer contains
placeholder marks.
Pedestal Base Assembly Pedestal Top Attachment
Screw
Cap Screw
Cap
Side Panel
Shelf
Shelf Support
Shelf Support
Shelf Support
Shelf Support
Floor
Side Panel
Counter Top
Front Panel
Back Panel
(with Door)
NOTE: Remove pins for floor from
side panels when packing.
12
Counter Top Attachment
*
Align hole with pin. Rotate pin. Spring
will push pin into hole.
**
When assembled
Steps:
1) Attach pins at bottom interior of side panels. Note: Pins are designed to be slightly angled.
2) Use screw caps to secure side panels to front & back panels.
3) Slide floor into the bottom of assembled pedestal base. The floor will sit on pins of the side panels.
4) Connect shelf supports with Velcro inside of panels, then place shelf on top of supports.
5) Attach Counter Top to assembled pedestal base. See Counter Top Attachment detail.
Symphony SYM-408 Portable Counter
If you would like to tell us about your experience with your setup instructions please email us at [email protected]
SETUP INSTRUCTIONS

© 2020
General Setup Instructions
- Read entire setup instruction manual prior to
unpacking parts and pieces.
- The setup instructions are created specifically
for this configuration.
- Setup instructions are laid out sequentially in
steps, including exploded views with detailed
explanation for assembly.
Cleaning & Packing
- For Cleaning Metal, Plex, & Laminate Parts:
Use a MILD NON-ABRASIVE cleanser and
soft cloth/paper towel to clean all surfaces.
- Keep exhibit components away from heat
and prolonged sun exposure.
Heat and UV exposure will warp and
fade components.
- Retain all provided Packing Materials.
All provided packing materials are for
ease of repacking & component protection.
Disassembly
- For loss prevention, keep all
knobs & connectors attached to
extrusions during disassembly.
Part Identification - Numbering
7A
Engaged Lock
DO NOT USE POWER TOOLS
ALL CONNECTIONS MUST
BE TIGHTLY SECURED
WARNING
General Information