Seville Classics UltraHD 20283 User manual

TR160601
ASSEMBLY INSTRUCTIONS
Mobile Work Table (Model No. 20283)
36 in W x 24 in D x 37.5 in H
(91.44cm x 60.96cm x 95.25cm)

(pg 1 of 5)
#59
#1
#5-B
#47
#50
#3
#14
#12
#27

PARTS LIST (pg 2 of 5)
Please check the parts carefully according to the parts list. If you are missing any parts, please call our customer service
department (please refer to page 5 of 5).
(#1) Wood Top x 1 pc
(#5-B) Leg x 2 pcs
(#3) Bottom Shelf x 1 pc
(#12) Wheel w. Brake x 4 pcs
(#59) M6 Lock Washer x 32 pcs
(#47) "L" Bracket x 8 pcs
(#50) Screw (M6 x 15L) x 32 pcs
(#14) Screw (M4 x 10L) x 8 pcs
(#27) M4 Washer x 8 pcs
(#21) Screw Driver x 1 pc
(#25) Wrench x 1 pc

Step 1: Install "L" Bracket (#47)
NOTE:
Screw holes face inward
Step 2: Install Leg Piece (#5-B)
NOTE:
Step 3: Install the Bottom Shelf (#3)
NOTE:
The bottom shelf can be reversed as an optional
bottom tray.
Make sure the top of the legs are attached to the
wood top. The screw hole side of the legs are
facing inward.
Do not fully tighten the screws. This will help
you make any adjustments for alignment.
Attach the "L" Bracket (#47) to the Leg piece (#5-
B) as the picture shows, use 8 pcs of Screw (#50),
Lock Washer (#59) and Screwdriver (#21) to
tighten. Repeat this step to install "L" Bracket
(#47) to another Leg piece (#5-B).
Do not fully tighten the screws. This will help
you make any adjustments for alignment.
ASSEMBLY INSTRUCTIONS (pg 3 of 5)
Mobile Work Table (Model No. 20283)
Make sure the top of the bottom shelf is aligned
with the leg's crossbar before tightening the
screws.
Attach the Leg pieces (#5-B) to the back of the
Solid Hardwood Board (#1). Line up the screw
holes, use 16 pcs of Screw (#50), Lock Washer
(#59) and Screwdriver (#21) to tighten.
Install the Bottom Shelf (#3) with 8 pcs of Screw
(#14) and M4 Washer (#27) as the picture shows.
#5-B
#59
#50
#59
#14
#27
#3

Step 4: Install Wheels (#12)
UltraHD Wood Top Maintenance:
Although great care is taken to hand select consistent wood top
color and grain for UltraHD products, there can and will be natural
variations in color and graining between finished products. These
variations contribute to the beauty of using a natural material as a
workbench and are considered standard quality. Variations of
color within these standards and minor scratches in the clear coat
finish will not be a reason for replacement. If the wood top is
received with excessive damage or splitting, Seville Classics will
guarantee replacement of the wood top.
Restore Shallow Scratches or Chips
If the wood top becomes scratched and chipped over time or
during assembly, a Polyurethane finish can be applied to help
restore the wood's natural texture, as well as protect the surface
from future damage.
Applying a Polyurethane Coating
Please follow the manufacturer's instruction on the product for
application.
ASSEMBLY INSTRUCTIONS (pg 4 of 5)
Mobile Work Table (Model No. 20283)
After the Bottom Shelf (#3) assembly, screw the
Wheels (#12) to the Leg (#5-B) using the wrench (#25)
as the detail picture shows. Fully tighten the wheel to
the leg.
Turn the Mobile Work Table upright once you finish
this step.

***Please visit our website or call and inquire about our additional UltraHD Line***
UltraHD Line
Model No. 20204
UltraHD 6-Drawer Rolling Cabinet
Model No. 20238
UltraHD Rolling Cabinet
Model No. 16238
UltraHD Storage Cabinet
Model No. 16236
UltraHD Storage Cabinet
Model No. 16221
UltraHD Locker Gear Cabinet
USA
Telephone: [phone] within USA
Hours: 9:00am - 4:30pm (Pacific Standard Time)
Fax: [phone]
E-mail: [email protected]
Website & Online Store: www.sevilleclassics.com
CONTACT INFORMATION (pg 5 of 5)
*If you are missing any parts, have any questions, or need additional assistance in assembly, please contact
our bilingual (English and Spanish) customer service department at:
Seville Classics, Inc.
19401 South Harborgate Way
Torrance, CA 90501

Model No. 20215
UltraHD Trash Bin
Model No. 20255
UltraHD Tool Box
UltraHD Line
Model No. 20206
UltraHD Workbench
Model No. 20230
UltraHD Wall Cabinet
Model No. 20262
UltraHD Rolling Workbench
Model No. 20267
UltraHD Workcenter