Bay West OptiServ User manual

Dispenser Loading –Hands-Free Mechanical
Install the roll of paper so that it unwinds from the back
Tuck the paper under the white bar at the front of the cradle and fold back
the start of the new roll about 1” – 2” and crease along the full width of the
towel.
Then press the ‘PUSH’ lever to advance the paper.
86500
-
Translucent
86530
-
Red
86540
-
Green
86550
-
Blue
86560
-
White
Dispenser Loading Instructions
OptiServ™ Hands Free

Automatic Stub Roll Transfer for Hands-Free Mechanical
Remove the stub roll from the roll support arms and place in the back of
the dispenser, ensuring that the paper runs under the two side pieces of
the cradle.
Place a new roll on the roll support arms with the paper unwinding from the
back. Place the end of the paper under the white bar at the front of the
cradle, ensuring that the paper runs over the two side pieces of the cradle.
Fold back the start of the new roll about 1”-2” and crease along the full
width of the towel.
When the stub roll finishes, the user can advance the new roll by pressing
the ‘PUSH’ lever that is now exposed.