Bayby BBM 7005 User manual

EN / Digital Audio Baby Monitor ■User’s manual
BBM 7005

EN-2
2

Digital Audio Baby Monitor EN
3
Table of Contents
Introduction ...................................................................................................................................................... 4
Safety instructions and important notes............................................................................................................ 5
Included contents............................................................................................................................................. 8
Description of the parent unit............................................................................................................................ 9
Description of the baby unit............................................................................................................................ 10
Power supply ................................................................................................................................................. 10
Installation location of the units ....................................................................................................................... 12
General information about using the baby monitor.......................................................................................... 12
Turning the parent unit on and off ................................................................................................................... 13
Turning the baby unit on and off...................................................................................................................... 13
Pairing the parent and baby and parent units.................................................................................................. 13
Setting the volume intensity ............................................................................................................................ 14
Two-way communication function................................................................................................................... 14
Night light....................................................................................................................................................... 14
ECO mode ..................................................................................................................................................... 14
Troubleshooting.............................................................................................................................................. 14
Cleaning and maintenance ............................................................................................................................. 15
Technical information ...................................................................................................................................... 15
Instructions and information about the handling of used packaging ................................................................ 16
Explanation of symbols used on the product, its accessories and packaging.................................................. 16

Digital Audio Baby Monitor
EN
4
Introduction
■Thank you for selecting the Bayby BBM 7005 Digital Audio Baby Monitor. This digital baby monitor is agreat
child care accessory that enables you to hear your baby when you are not in the same room. Nevertheless,
it is important to understand that it cannot serve as asubstitute for responsible adult supervision.
■The sound detected by the baby unit is transmitted to the parent unit. FHSS digital wireless technology is
utilised for transmitting the audio signal. This guarantees very high quality audio transmission up to arange
of 300 metres.
■The encrypted wireless transmission and automatic available channel selection features guarantee privacy
and the peace of mind that you will hear only your child.
■You will be informed about an exceeded signal range, loss of signal or interference by means of an acoustic
alarm and the respective LED indicator light.
■Volume can be set to several levels. The parent unit also features aLED volume indicator, which is particularly
useful when the parent unit is set to alow volume.
■The baby monitor automatically switches to ECO mode when no audio is being transmitted. This reduces
the transmission power to ensure power efficient operation and minimisation of radiation.

Digital Audio Baby Monitor EN
5
Safety instructions and important notes
■Before first use, thoroughly read the user’s manual. Keep this
user’smanual for future use.
Attention:
This baby monitor meets all relevant standards and its use is safe
when all the instructions contained in this user’smanual are followed.
■The baby monitor serves to monitor your child when you are not in
the same room and cannot supervise it directly. Nevertheless, it is
important to keep in mind that your child’ssafety comes first and
therefore this baby monitor cannot serve as asubstitute for supervision
by aresponsible adult.
■This baby monitor is intended for home (private) use only. It is not
intended for commercial purposes.
■After unpacking the baby monitor and its accessories from the
packaging material, place the plastic bags in asafe location out of
children’sreach. In the presence of children, plastic bags may present
asuffocation hazard.
■Only use the baby monitor with the original USB power cables that
came with it.
■Never use the baby monitor with accessories that are not approved
by the manufacturer.
■Before connecting the USB power cable to the USB adapter (not
included), make sure the voltage stated on its rating label corresponds
to the voltage in the power socket. Always position the USB power
cable so that it will not be tripped over.
■The baby monitor may only be operated by adults.
■Children must not play with the baby monitor. Keep the baby monitor,
USB power cables and batteries out of children’sreach.

Digital Audio Baby Monitor
EN
6
■Before first using the baby monitor, acquaint yourself with its functions
and before every use, make sure that both the baby and parent unit
are in working order and that the batteries are not flat when they are
used as apower source.
■Ensure that the baby monitor and the USB power cables do not come
into contact with hot surfaces or sharp objects.
■Do not place the baby monitor in the vicinity of water containers or
appliances that are sources of heat.
■Do not cover the baby monitor and do not place any items on it.
■Do not use the baby monitor in an excessively dusty or humid
environment. Do not subject it to extreme temperature changes and
electromagnetic fields.
■Do not submerge the baby monitor and its accessories in water or
rinse it under running water.
■Always disconnect the baby monitor from the power socket when not
using it and before cleaning it.
■Do not disconnect the USB power cable connected to the USB
adapter from the power socket by pulling on the cable. This could
damage the power adapter or the power socket. Disconnect the USB
power cable from the power socket by pulling on the adapter.
■For powering both of the units from an internal power source, only
use type AAA batteries (3× 1.5 Vper each unit). ATTENTION– the
baby monitor is not to be used as abattery charger.
■When not using the baby monitor for an extended period of time,
remove the batteries from both the units.
■Keep the batteries out of children’sreach as they may present ahazard
to achild. In the event that achild swallows abattery, immediately
seek medical help.
■Do not attempt to short circuit or break the battery or throw it into
afire. Do subject the battery to direct sunlight, fire, etc.
■Do not make any alterations to the baby monitor that would change
its electrical or mechanical properties.

Digital Audio Baby Monitor EN
7
■The baby monitor must not be operated with auxiliary amplifiers of
high-frequency power or directional antennas.
■Do not use the baby monitor when it is damaged in any way or if the
USB power cable is damaged.
■Do not attempt to repair the baby monitor yourself. Have all repairs
or adjustments performed at an authorised service centre. By
tampering with the product you risk voiding your legal rights arising
from unsatisfactory performance or quality warranty.
■We recommend saving the original box, packaging material, receipt
and responsibility statement of the vendor or warranty card for the
duration of the warranty. It is appropriate to transport the baby monitor
in its original box.

Digital Audio Baby Monitor
EN
8
Included contents
■Carefully unpack the baby monitor and take care not to throw away any part of the packaging before you
find all its parts.
A
2
1
3
4
5
1Parent unit
2Baby unit
3USB power cable for the parent unit
4USB power cable for the baby unit
5User’smanual

Digital Audio Baby Monitor EN
9
Description of the parent unit
B
5
6
7
8
9
10
11
12
1
2
3
4
1Night light On/Off button
2Antenna
3On/Off button of the unit
4LED volume level indicator
5LED power indicator
6Increase volume button
7Decrease volume button
8Night light On/Off indicator
9Two-way communication button
q; Battery compartment cover
qa Belt clip
qs USB slot

Digital Audio Baby Monitor
EN
10
Description of the baby unit
C
1
2
3
4
5
6
7
8
9
10
1 Night light On/Off button
2 Antenna
3 On/Off button of the unit
4 Night light
5 Microphone
6 LED power indicator
7 Increase volume button
8Decrease volume button
9Battery compartment cover
q; USB slot
Power supply
■The baby monitor can be powered directly from the power grid using the supplied USB power cable and an
external USB interface (e.g. your computer, USB hub, powerbank, etc.) or via acommonly available USB
adapter, connected to apower socket.
■Another power source is from standard disposable or rechargeable batteries type AAA
(3x 1.5 Vper unit).
■The baby monitor is not abattery charger.
Info:
The supplied USB power cables A3 andA4 are identical and interchangeable between both units. The power
supply for the units is also identical.

Digital Audio Baby Monitor EN
11
Power supply from the mains
■Insert the end of the USB cable A3 (A4) into the USB slot B12 (C12)on the unit. Connect the other end to
an external USB interface or via aUSB power adapter to apower socket.
Attention:
If you decide to power the units using the USB power cables, and batteries are inserted in both the units, first
take them out of both the units.
Power supply from batteries
■If the unit is connected to the power grid, disconnect it before inserting the batteries.
■Screw out cover B10; (C9) on the back of the unit. Place type AAA batteries (3x 1.5 V) into the battery
compartment. When inserting the batteries, make sure that you maintain the correct polarity, which is marked
inside the battery compartment. Then screw the battery cover back on.

Digital Audio Baby Monitor
EN
12
Low battery voltage indicator
■If the batteries have the correct voltage, the LED indicators B5 or C6 are lit green on both the units after
they are turned on.
■When the batteries have asufficiently low voltage, the LED indicators will be lit orange and later red. When
this happens, replace or recharge the batteries as soon as possible, or connect the units via USB power
cables to apower source.
Installation location of the units
Parent unit
■Put the parent unit A1 in the room where you will be located. When the parent unit is to be powered from
the grid, locate it within reach of apower socket.
Baby unit
■Locate the baby unit A2 within reach of apower socket on an even, dry and stable surface in the room where
you want to monitor your child. We recommend an elevated location (e.g. chest of drawers or ashelf) at
asufficient distance away from equipment and devices that could cause signal interference.
■Locate the baby unit at least 1.5 m away from your child to minimise the effects of electro-smog.
Attention:
Never locate the baby unit or the USB power cable in the baby’sbed or within your child’sreach.
Incorrect distance between the units
■If the parent unit is located too far from the baby unit, it will beep and the LED volume level indicator B4 will
start flashing. If this happens, reduce the distance between the parent unit and the baby unit.
■If the parent unit is located too close to the baby unit, you may hear an unpleasant audio noise or ahigh-
tone sound. If this happens, move the parent unit farther away from the baby unit, or reduce the volume
level on the parent unit.
General information about using the baby monitor
■Before using the baby monitor for monitoring your child, always check that both the baby and parent unit
and are in working order, that there is aconnection between the units and that audio is being transmitted.
In the event that there is no connection between the baby and parent unit and (the baby unit is turned off or
out of signal range), the LED indicator B4 will start flashing and sound an acoustic alarm signal (beeping).
■The sound detected by the baby unit is transmitted to the parent unit. LED indicator B4 will inform you about
audio transmission. This will be particularly useful when the parent unit A1 is set to alow volume.
■To increase the signal range, place the baby unit A2 in an elevated location as close as possible to the door
or window.
■Other radio waves may interfere with the signal transmission. For this reason, do not place the baby monitor
in the vicinity of appliances such as e.g. amicrowave oven or WLAN devices, etc.

Digital Audio Baby Monitor EN
13
■The following factors may interfere with the signal or reduce its range:
– one of the units is covered,
– obstacles in the signal transmission direction such as furniture, walls, trees, etc.
– weather events such as fog, rain, etc.
Turning the parent unit on and off
■To turn on the parent unit, press button B3. The LED indicator B5 will be lit.
■If the baby unit is not turned on, an audio signal (beeping) will be made and the LED indicator B4 will start
flashing.
■To turn off the parent unit, press button B3 and hold it down for longer than 3 seconds. LED indicator B6 will
turn off and LED indicator B9 will light up for amoment and then turn off.
Turning the baby unit on and off
■To turn on the baby unit, press button C3. The LED indicator C6 will be lit.
■To turn off the baby unit, press button C3 and hold it down for longer than 3 seconds. The LED indicator
light C6 will turn off.
■When you have finished using it, always turn off the baby unit and disconnect the USB power cord from
the power source.
Pairing the parent and baby units
■Under normal circumstances, both units are already paired at the factory. In the event that you are unsuccessful
establishing aconnection between the parent and baby unit, proceed as follows:
– on both units, screw out the battery compartment cover.
– connect the units to the power grid
– turn both units on
– simultaneously press the pairing buttons on both units and hold them down for afew moments.

Digital Audio Baby Monitor
EN
14
Setting the volume intensity
■Aunit’svolume can be increased using buttons B6 and B7 on the parent unit or buttons C7 and C8 on
the baby unit. The volume setting on the baby unit is confirmed by the LED indicator of the volume level B4
being lit on the parent unit.
Two-way communication function
■The two-way communication function can be used to comfort and calm down your child.
– if you wish to talk to your child, hold down button B9 on the parent unit.
– if you wish to listen to your child again, release button B9.
Night light
■The night light provides your child with agentle, calming light that will enable you to check on it without
having to turn on the main light in the room. The light can be turned on either directly on the baby unit or
remotely on the parent unit.
■Turning the light on and off on the parent unit:
– Press button B1. The night light C4 will be lit on the baby unit and LED indicator B8 will be lit on the
parent unit. Press button B1 again to turn off the night light.
■Turning on the night light on the baby unit:
– Press button C1. The night light C4 will be lit and LED indicator B8 will be lit on the parent unit. Press
button C1 again to turn off the night light.
ECO mode
■The baby monitor automatically switches to ECO mode when no audio is being transmitted. This reduces
the transmission power to minimum to ensure power efficient operation and limits unnecessarily exposing
your child to radio transmissions.
Troubleshooting
■Loud audio noise or ahigh tone beep is coming from the parent unit
– The parent unit is located too close to the baby unit. Move the parent unit farther away from the baby
unit.
– When powering the units using batteries, check that the power supply LED indicator B5 or C6 is not lit
orange or red. If so, it is necessary to replace or recharge the batteries.

Digital Audio Baby Monitor EN
15
■The parent unit is sounding an alarm signal (beeping).
– Check that the baby unit is turned on.
– Check that the baby unit is connected to apower socket.
– When powering the baby unit using batteries, then the batteries may be flat. Replace them with anew
ones.
■The parent unit remains mute or very quiet
– No noise is being made in the vicinity of the baby unit (e.g. when your child is calmly sleeping), the baby
unit switches to ECO mode to save power. As soon as asound is made in its vicinity, the unit again
switches to full operation.
– The volume set on the parent unit is too low. Set ahigher volume using button B 6.
■Weak signal, signal interference or the connection is repeatedly interrupted.
– If there is any equipment located in the signal transmission direction, e.g. amicrowave oven, move it
elsewhere or turn it off.
– Check whether there are any obstacles in the signal transmission direction. Move the units so that
apermanent connection is made.
– Check that the units are within the signal range.
Cleaning and maintenance
■Before cleaning the units, always disconnect them from the power socket. If they become soiled, wipe the
external parts of the baby and parent units using acloth lightly dampened in lukewarm water. Then wipe
everything so that it is thoroughly dry.
■To clean the USB power cable, use aclean, dry cloth.
■For cleaning, do not use abrasive cleaning products, solvents, thinners, etc. Never submerge the parent and
baby units, including the USB power cables in water or rinse them under running water.
Technical specifications
Model number...................................................................................................................................BBM 7005
Frequency broadcast band.....................................................................................................2,400–2,480 MHz
Number of channels .......................................................................................................................................32
Transmission power............................................................................................................................... 17 dBm
Range in open space.......................................................................................................................up to 300 m
Audio transmission ......................................................................................................two- way communication
Power source:
Input..............................................................................................................................................5 V, 1000 mA
or
Batteries for parent unit ...................................................................................................... 3 × 1.5 V(type AAA)
Batteries for baby unit......................................................................................................... 3 × 1.5 V(type AAA)
Electrical shock protection class....................................................................................................................... II
Operating temperature (may be limited by the operating temperature of the batteries) ...........................0–50 °C

Digital Audio Baby Monitor
EN
16
Disposal of used batteries
Do not dispose of old batteries with regular household waste. Dispose of batteries at designated battery disposal
points.
Instructions and information about the handling of used
packaging
Dispose of used packaging material at asite designated for waste in your municipality.
FAST ČR hereby declares that radio device model number BBM 7005 is in compliance with directive 2014/53/
EU.
The full wording of the EU Declaration of Conformity is available at the website: www.bayby.cz
The Czech language is the original version of the user’smanual.
Explanation of symbols used on the product, its accessories
and packaging
This symbol indicates that this appliance meets all the basic requirements of EU directives related to it.
This appliance meets all the basic requirements of EU directives related to it.
Product with protection class III: Electrical shock protection is provided by separated extra-
low voltage (SELV).
This symbol indicates that it is aproduct that may be used indoors.
This symbol on products or original documents means that used electric or electronic
products must not be added to ordinary municipal waste. For proper disposal, renewal
and recycling hand over these appliances to determined collection points. Alternatively, in
some European Union states or other European countries you may return your appliances
to the local retailer when buying an equivalent new appliance. Correct disposal of this
product helps save valuable natural resources and prevents potential negative effects on the
environment and human health, which could result from improper waste disposal. Ask your
local authorities or collection facility for more details. In accordance with national regulations
penalties may be imposed for the incorrect disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier for the
necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product, request
the necessary information about the correct disposal method from the local council or from
your retailer.
Changes to text and technical parameters are reserved.