Bayby BBW 2000 User manual

Multifunction Baby Bottle Warmer EN
1
Table of Contents
Introduction .....................................................................2
Safety instructions and important notes ................................................3
Description ......................................................................7
Operation .......................................................................8
Cleaning the appliance and removal of limescale deposits .................................10
Technical specifications ...........................................................11
Explanation of symbols used on the product, its accessories and packaging ...................12
Instructions and information about the handling of used packaging ..........................13

Multifunction Baby Bottle Warmer
EN
2
Introduction
■The multifunction Bayby BBW 2000 Baby Bottle Warmer makes it possible to easily warm up baby
bottles and baby food jars within afew minutes or sterilise baby feeding accessories.
■It quickly warms up the contents of baby bottles and is easy to use.
■It sterilises accessories such as baby bottle nipples, dummies or other baby feeding accessories.
■It has afunction for warming up baby food jars, e.g. purées, porridge and other foods cooked in
steam.

Multifunction Baby Bottle Warmer EN
3
Safety instructions and important notes
■Only use the feeding bottle warmer in accordance with the
instructions included in this user's manual. Not adhering to
these instructions may result in the incorrect operation of the
bottle warmer or its damage. Keep this user'smanual for future
use.
■Only use the appliance indoors and do not expose it or its
accessories to direct sunlight.
■Keep this appliance and the power cord out of reach of children
that are younger than 8 years of age.
■Do not submerge the power cord, plug or the appliance in water
or in any other liquid.
■Do not leave the power cord in the vicinity of hot surfaces.
■Only connect the appliance to agrounded power socket. Always
check that the plug is properly inserted into the power socket.
■Before connecting the appliance, check that the voltage
specified on the bottom part of the appliance corresponds to
the voltage in the local power grid.
■If it is necessary to use an extension cord, check that the power
cord is grounded with anominal value of at least 10 amperes.

Multifunction Baby Bottle Warmer
EN
4
■Do not use the appliance if the power plug, power cord or the
appliance itself is damaged. If the power cord is damaged, have
it replaced at an authorised service centre to avoid apossibly
dangerous situation.
■Do not place the appliance on a hot gas or electric stove or
ahot oven or in their vicinity.
■The appliance may be used by children up to 8 years of age and
persons with limited physical, sensory or mental abilities or by
persons with insufficient experience and knowledge only when
under supervision or after they have been instructed about
the safe use of the appliance and when they are aware of all
risks associated with using the appliance. Cleaning and user
maintenance must not be performed by children younger than
than 8 years of age and that are unsupervised. Children must
not play with the Baby Bottle and Food Warmer.
■Clean the Baby Bottle and Food Warmer according to the
instructions contained in chapter Cleaning the appliance and
removal of limescale deposits.
■Do not preheat the appliance.
■Always place afully assembled baby bottle into the Baby Bottle
and Food Warmer and only then pour in the water. Make certain
that you pour water into the bottle warmer before turning it on.

Multifunction Baby Bottle Warmer EN
5
■Hot water may cause serious scalding. So be very careful when
there is hot water inside the bottle warmer.
■Accessible surfaces of the appliance may heat up during
operation.
■Do not move the appliance if it contains hot water.
■As soon as the food or milk reaches the required temperature,
remove the bottle or container from the bottle warmer. If you
leave the food or milk in the bottle warmer, its temperature will
rise.
■Before you start feeding achild, always check the temperature
of the food.
!
Attention:
Do not leave the bottle warmer without supervision when it is
connected to apower socket.
■When not using the appliance, disconnect it from the power
socket.
■Before cleaning the appliance, allow it to cool down.
■Follow the instructions for removing limescale deposits to
prevent irreparable damage.

Multifunction Baby Bottle Warmer
EN
6
■Do not attempt to open or repair the appliance yourself. Have
all repairs or adjustments performed at an authorised service
centre. By tampering with the appliance you risk voiding your
legal rights arising from unsatisfactory performance or quality
warranty.
■We recommend saving the original box, packaging material,
receipt and responsibility statement of the vendor or warranty
card for the duration of warranty. It is appropriate to move the
bottle warmer in its original box.

Multifunction Baby Bottle Warmer EN
7
Description
Description of the product
A
1
2
3
4
5
6
7
1Cap
2Bowl
3Stainless steel heating tank
4Appliance body
5Indicator light
6Control dial
7Bottle warmer base
■All parts, except for the stainless steel heating tank, are made from amaterial that does not
contain BPA (Bisphenol A).

Multifunction Baby Bottle Warmer
EN
8
Operation
!
Attention:
Never use the bottle warmer without water in the heating tank!
■Stand the bottle warmer on ahorizontal and stable surface.
■The steam that is released during the warming up process is hot. Keep your hands away during the
warming up process.
Warming up feeding bottles
■Pour 90 ml of water into the heating tank A3.
■Place the baby bottle into the heating tank A3.
■Never allow water to rise above the neck of the bottle or to spill over the edge of the bottle warmer.
■Check that the control dial A6is in the "OFF" position (turned off) and plug the bottle warmer into
apower socket.
■Select a heating method by turning the control dial A6to the right to the "baby bottle 40 °C"
symbol. This is the expected water temperature around the bottle. This is not the food temperature.
■The indicator light A5signalises that the bottle warmer is running.
■During the warming up process, the light will turn on and then turn off once the water around the
bottle is heated to the maximum temperature.
■After reaching 40°C, the water temperature is maintained at the same level until the appliance is
turned off by turning control dial A6to the left towards the "OFF" symbol (turned off).
■Always test the food once it reaches the desired temperature, immediately remove it from the bottle
warmer.
■Shake the baby food or milk after taking it out of the bottle warmer. Check the temperature of the
food or milk by dripping alittle on to your wrist.
Heating up baby food
■Pour 150 ml of water into the heating tank A3.
■Place the bowl A2with 90–150 ml of food into the heating tank A3.

Multifunction Baby Bottle Warmer EN
9
■Place the cap A1down on to the bowl containing the food.
■Check that the control dial A6is in the "OFF" position (turned off) and plug the bottle warmer into
apower socket.
■Select aheating method by turning the control dial A6to the right to the "bowl 70°C" symbol. This
is the expected water temperature around the bottle. This is not the food temperature.
■The indicator light A5signalises that the bottle warmer is running.
■During the warming up process, the light will turn on and then turn off once the water around the
bottle is heated to the maximum temperature.
■After reaching 70°C, the water temperature is maintained at the same level until the appliance is
turned off by turning control dial A6to the left towards the "OFF" symbol (turned off).
■Always test the food once it reaches the desired temperature, immediately remove it from the bottle
warmer.
■Stir the baby food or milk after taking it out of the bottle warmer.
Sterilisation
■Pour 180ml of water into the heating tank A3.
■Place the accessories that you wish to sterilise, such as baby bottle nipples, dummies or other baby
feeding accessories directly into the heating tank A3.
■Place the cap A1down on to the bottle warmer.
■Select aheating method by turning the control dial A6to the right to the "100 °C" symbol.
■The indicator light A5signalises that the bottle warmer is running.
■During the sterilisation process, the light will turn on and then turn off once the water is heated to the
maximum temperature of 100 °C.
■After reaching 100 °C, the water temperature is maintained at the same level until the appliance is
turned off by turning control dial A6to the left towards the "OFF" symbol (turned off).
■Allow the accessories to be sterilised for approx. 5 minutes. Then turn off the appliance by turning
the control dial A6to the left towards to the "OFF" symbol (turned off).

Multifunction Baby Bottle Warmer
EN
10
Cleaning the appliance and removal of limescale
deposits
Cleaning
■After every use, disconnect the bottle warmer from the power socket and allow it to cool down.
■For hygiene reasons, pour the water out of the bottle warmer.
■Clean the outer and inner side of the bottle warmer using adamp cloth.
!
Attention:
Do not clean the bottle warmer, its parts or its accessories using abrasive products, chemical
solvents, cleaning products, alcohol or sharp utensils.
Note:
If you use the bottle warmer to heat baby food, check that there are no spilled baby food remains
inside it.
!
Attention:
Never place the bottle warmer directly under running water or submerge the appliance or its parts
and accessories in water or other liquids!
■Never wash the bottle warmer in adishwasher!
■You may clean the cap A1and the bowl A2using asponge or cloth dipped in soapy water or you
can wash it in adishwasher if you place them in the top dishwasher rack.
Removing limescale deposits
■Disconnect the bottle warmer from the power socket and allow it to cool down.
■It is recommended to remove limescale deposits from the bottle warmer every 4 weeks to ensure
further effective operation of the appliance.