Kontour K1043E User manual

Kontour Coil
Boot Warmer
Installation Guide
Code: K1043E
28” x 18” Electric Plug-In
Assembly Instructions (see figure 1)
1
1. Check all items have been received. Read all instructions before continuing.
2. Attach feet to towel warmer using the fixings provided.
3. Level feet if necessary.
Electric Plug-In Connection
2
TURN OFF POWER SUPPLY BEFORE PROCEEDING
Do not connect the Towel Warmer to the power supply until all instructions have been read and installation carried out in
accord with them. Your towel warmer is 75W (110V) and conforms to CSA standards (File ref: 2422531). Please ensure
the CSA label is visible.
1. Turn off power supply.
2. Plug connector in.
3. Switch on power supply.
1-877-757-8930 www.kontour.ca
Warning: In case of damage or failure of the Towel Warmer the unit should be returned to the manufacturer or their
distributor. The warranty of 2 years on the Towel Warmer is NOT VALID in case of improper use or installation. Product is
designed for use within Canada and the United States only.

Specifications & Drawings
Model # Description Finish Weight (lb) Watts WxH (mm) WxH (Inches) Metal Type
K1043E Coil Electric Plug-In Chrome 5.5 75W 700 x 435 x 296 27.5 x 17 x 11.75 Stainless Steel
Volts
110V
Warranty: 2 Years
Fixings: Screws, and Allen Key (if needed) are included
Care & Maintenance: A periodic wash using warm water and a soft cloth will retain the high quality finish of your towel warmer for
many years to come. ON NO ACCOUNT should any household bleaches, detergents, abrasive polishes, steel wool or other cleaning
agents be used on this item.