BCP SKY6624 User manual

SKY5732 + SKY6624 + SKY6625
INSTRUCTION
MANUAL
Mobile Elevated Wood
Planter with Shelf
Ver. 8

As shoppers, we’re always trying
to find the perfect balance between
quality & value. At BCP, we believe
we’ve achieved that. Our diverse
catalog of everyday essentials is
tailored especially to our customers
& guaranteed to hit that sweet
spot of high quality & low price.
Always.

| 3
HARDWARE
TOOLS REQUIRED
1
24 PCS
M4 X 40MM
SCREW
M4 X 30MM
SCREW
2
12 PCS
APPROXIMATELY
20 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
•Do not stand on or use any part of this item as a step ladder.
•Firmly secure all bolts, screws and knobs before use.
•Reconfirm that all bolts, screws, and knobs are secure every 90 days.
•Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is
completely assembled.
•Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
•Be aware that some parts are heavy and have sharp edges.
•If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
•Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void
the product warranty.
•This item is made of wood and may expand due to moisture
NOTICE
PHILLIPS
SCREWDRIVER
3
8 PCS
M4 X 45MM
SCREW
7
2 PCS
CASTER
5
4 PCS
M6 X 80MM
BOLT SET
M4 X 25MM
SCREW
6
56 PCS
Please retain these instructions for future reference.
4
4 PCS
DOWEL
8
2 PCS
LOCKING
CASTER
9
4 PCS
BARREL NUT BARREL BOLT
10
4 PCS
ELECTRIC DRILL
(OPTIONAL)
FLAT HEAD
SCREWDRIVER
WRENCH
(PROVIDED)

4|
C
2 PCS
SHORT PANEL
PARTS
2 PCS
LEG I
A1
2 PCS
LEG II
A2
2 PCS
BOTTOM PANEL II
E
D
2 PCS
BOTTOM PANEL I
2 PCS
LONG PANEL
B
I
2 PCS
LEG SUPPORT
3 PCS
SUPPORT
F
4 PCS
LEG CAP
G
J
14 PCS
SHELF PANEL
1 PC
LINING
H

| 5
1Attach one part C short panel to one part A1 leg and one part A2 leg with six part 1 screws,
three screws per leg. Repeat to assemble the other short panel.
PRODUCT ASSEMBLY
A1
A1
A2
A2
C
x2
1x12

6 |
3Slide two part D and two part E bottom panels into the designated slots.
When inserting the part E panels, push them flush against the part A (1 & 2) legs.
B
x2
1x6
2Insert a part 9 barrel nut into a part B long panel and secure to the part C short with a part 10
barrel bolt. Repeat to secure the other side.
Attach two part B long panels to a short panel side with six part 1 screws.
PRODUCT ASSEMBLY
E
E
D
D
There will be a slight gap between
the two D panels, this is normal and
will reduce warping from moisture.
9x2
10 x2

| 7
x2
4Insert a part 9 barrel nut into the part B long panel and secure with a part 10 barrel bolt. Repeat
to secure the other side.
Attach the other short panel side with six part 1 screws. Repeat to secure the other side.
PRODUCT ASSEMBLY
5Attach three part F supports with twelve part 2 screws.
1x6
2x12
F
x3
10 x2
9

6Flip the planter onto its legs. Place the part H lining.
PRODUCT ASSEMBLY
7Attach four part G leg caps with four part 4 dowels and eight part 3 screws.
H
G
x4
3x8 4x4
8|

9Attach the two part I leg supports with four part 5 bolt sets.
8Locate two part I leg supports and attach fourteen part J shelf panels with fifty-six part 6
screws. Attach three boards first to check for straightness before proceeding to the remaining
boards.
PRODUCT ASSEMBLY
| 9
I
x2
J
x14
6x56
5x4
I
x2
Use four screws per
panel, two screws on
each side.

10 Screw in two part 7 casters and two part 8 locking casters.
PRODUCT ASSEMBLY
10 |
7x2
8x2