BCP 800W Folding Treadmill User manual

Please keep this manual for future references as it contains important information.
bestchoiceproducts.com 1 844.948.8400
customerservice@
bestchoiceproducts.com
800W Folding Treadmill
SKY 3123
ASSEMBLY MANUAL

NOTICE
Thank you very much for choosing Best Choice Products! Please read
the installation instructions carefully before installing.
- Firmly secure all screws before use.
- Product is intended for indoor use only.
- If any parts are missing, broken, damaged, or worn, stop using this item until repairs are
made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer’s instructions as this could
void the product warranty.
- For safety purposes do not stand on running belt when starting the machine.
- Please stop immediately at the first sign of nausea.
- Please increase speed slowly if needed.
- Do not stand on belt while adjusting.
- It is recommended to wear athletic shoes when using the machine.
- Children, elderly, pregnant women, patients recovering from injuries or surgery are
prohibited to use the machine.
- Please clip the safety key on your clothing during use.
- Please firmly hold the rail bars during using.
- Retain these instructions for future reference.
Please put the machine on flat ground. It is unsuitable to put the machine at following places:
Outdoors.(The machine is specially designed for indoor use only)
Slanted ground or slanted places on balcony.
Sunlight area or near a heater/fireplace.
Big noisy places.
- Errors may appear if the power supply is not stable. Please do not use the same socket
together with computers, air conditioners, etc.
- It is suggested to wear athletic shoes clothing when using the machine.
- Please increase or decrease speed slowly.
- Be careful of children or other objects while folding and unfolding the machine.
- Do not put the machine near wet objects. Errors may occur if item gets wet.
- If you do not feel well before using, please consult with your doctor or coach.
- Our company is not responsible for any injuries as a result of improper use
- Please unplug after using.
- Please unplug when moving the machine or changing parts.
- Children, elderly, and pregnant women are prohibited from using the machine. Patients
should consultant their doctor before using.
- Please place the machine on a flat surface. Do not place any objects 2M behind the machine.
Caution During Use and Safety
1bestchoiceproducts.com
1 PERSON
ASSEMBLY 45 MIN ASSEMBLY

- Do not start the machine when it is folded.
- Keep water away from the machine, motor, power line, and plug.
- Do not use this machine in enclosed spaces or areas without air circulation.
- Do not place any objects on the machine.
- Keep plug away from hot locations or fireplaces.
- Please turn o machine and unplug after using.
- Please do not stand directly on the belt while starting the machine.
- Do not disassemble the machine without professional supervision.
- Please make sure the running belt is fastened before using.
Caution During Use and Safety Cont.
Parts & Assembly
Part #
1
2
3
4
5
6
7
8
9
10
11
Part Name
Knob
Silicone Oil
Washer
Display Monitor
Screw
Knob
Cup Holder
Safety Key
Hex Key
Pad
Cover
Specs
M16* 55
-
8
-
M8*15
M12*20
ABS
Red
-
8
ABS
Quantity
1
1
2
1
6
1
2
1
1
4
1
1
8
9
3
10
5
67
11
4
2
2
bestchoiceproducts.com

STEP 1: Use two part 5 screws, one part 3 washer,
and one part 10 pad to attach one side of the sup-
port frame to the base of the treadmill.
Repeat this on the other side with two more part 5
screws, a part 3 washer, and a part 10 pad to fully
attach the support frame to the treadmill.
STEP 3: Insert the part 8 safety key into the desig-
nated slot on the part 4 display monitor.
STEP 2: Use two part 5 screws and two part 10
pads to attach the handrail to the support frame.
Make sure that the screws do not interfere with the
electric wires within the support frame.
Place the two part 7 cup holders in the designated
slots next to the display monitor.
STEP 4: Screw the part 1 knob into the left railing
of the support frame.
Use the part 6 knob to attach the left side of the
support frame to the base of the treadmill.
6
1
8
4
10
7
10
55
5
3
3bestchoiceproducts.com

Display Monitor
Error Codes
Press “START” to power on the treadmill. After 3 sec-
onds the treadmill will begin operation at .6 miles/hour.
Press the “+” key to increase speed, and the “-“ key to
decrease speed.
The max speed is 7.5 miles/hour and the minimum
speed is .6 miles/hour.
Press “MODE” to display speed, elapsed time, and calo-
ries burned.
In “SCAN” mode, the display will toggle between speed,
elapsed time, and calories burned.
Press “PROG” to choose between three workout pro-
grams.
Press “START” to begin a workout program.
The “+” and “-“ keys are disabled during a workout pro-
gram. Press “STOP” or remove the safety key to stop a
program.
Press “STOP” to stop treadmill operation.
For an emergency stop, pull out the safety key.
ERR: The safety key is removed
E2: Motherboard error
E4: Motherboard error
E5: Overcurrent protection
E6: Motor error
E7: Interrupted communication
E8: Overload error
4
bestchoiceproducts.com

Folding & Maintenance
Specs.
Fold:
- Loosen the part 6 knob and lift up on the running board to fold the treadmill.
- Secure the frame to the running board by tightening the part 1 knob on the left handrail.
Unfold:
- Release the tension on the part 1 knob and unfold the treadmill.
- Tighten the part 6 knob to lock the treadmill in place.
Applying Silicone Oil:
- Pull up on the running belt to reveal the running board.
- Apply silicone oil directly to the running board underneath the running belt.
- Turn the treadmill on and let it run for 3 minutes.
- Repeat this after 30 hours of treadmill use to extend the life of the treadmill.
Product Name
Power
Voltage
Frequency
Speed
User Capacity
Treadmill
800W
110V
60Hz
.6-7.5 MPH
250 lbs.
5bestchoiceproducts.com
1
6

Troubleshooting
1) Running belt deviates to the left
- Start the treadmill at 1-1.5 miles/hour.
- Use the provided hex key to turn the screw on the back left of the machine clockwise.
- Let the machine run for 1 to 2 minutes and adjust as necessary until the belt is in the center of the
running board.
2) Running belt deviates to the right
- Start the treadmill at 1-1.5 miles/hour.
- Use the provided hex key to turn the screw on the back right of the machine counterclockwise.
- Let the machine run for 1 to 2 minutes and adjust as necessary until the belt is in the center of the
running board.
3) Running belt stuck in place
- Use the provided hex key to turn both screws on the back of the machine clockwise until the
issue is solved.
1 2 3
6
bestchoiceproducts.com

Email us, we’re here 7 days a week to help you!
[e-mail]
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury, property
damage or loss, whether direct, indirect, or incidental, resulting from the incorrect
attachment, improper use, inadequate maintenance, or neglect of this product.
LEARN MORE!