BCP SKY3123 User manual

SKY3123
Ver. 2
INSTRUCTION
MANUAL
800W Folding Treadmill

•Do not stand on or use any part of this item as a step ladder.
•Firmly secure all bolts, screws and knobs before use.
•Reconfirm that all bolts, screws, and knobs are secure every 90 days.
•Do not use or store this item in the proximity of open flame or flammable/combustible
chemicals.
•If any parts are missing, broken, damaged, or worn, stop using this product until repairs
are made and/or factory replacement parts are installed.
•Do not use this item in a way inconsistent with the manufacturer’s instructions as this
could void the product warranty.
•This product has a weight capacity of 250 lbs. Please do not exceed that amount of
weight on the chair.
•This product contains small parts for assembly. Keep small children and pets away while
assembling this product.
NOTICE
•Place the machine on flat ground. Do not use it in the following places:
- Outdoors
- Slanted ground
- Direct sunlight
- Near heat sources like a heater/fireplace
- Places with excessive noise
- Enclosed spaces or areas without proper air circulation.
•Errors may appear if the power supply is not stable. Do not plug into the same wall outlet
as computers, air conditioners, etc.
•Be careful of children or other objects while folding and unfolding the machine.
•Do not start the machine when it is folded.
•Make sure the running belt is fastened before use.
•Do not put the machine near wet objects or water. Errors may occur if item gets wet.
•Do not place any objects 6 feet behind the machine.
•Do not stand on running belt when starting the machine.
•Stop immediately at the first sign of nausea.
•Increase treadmill speed slowly; do not immediately jump to an increased pace.
•Do not stand on belt while adjusting.
•Wear athletic shoes and athletic clothing when using this machine.
•Children, elderly, pregnant women, and patients recovering from injuries or surgery are
prohibited to use the machine.
•Clip the safety key onto your clothing during use.
•Firmly hold the railings during use.
•Do not place any objects on the machine.
•Please turn o machine and unplug after using.
•Unplug when moving the machine or changing parts.
•Do not disassemble the machine without professional supervision.
CAUTION DURING USE
Please retain these instructions for future reference.
Pg. 2

Pg. 3
APPROXIMATELY
45 MIN.
45 MMBLY
1 PERSON
ASSEMBLY APPROXIMATELY
30 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
ALLEN WRENCH
(PROVIDED)
TOOLS REQUIRED
PARTS
HARDWARE
1
1 PC
2
1 PC
3
2 PCS
4
6 PCS
5
4 PCS
A B C
2 PCS 1 PCS 1 PC
CUP HOLDER SAFETY KEY SILICON OIL
250 LBS
CAPACITY
LBS

Pg. 4
TOOLS REQUIREDPRODUCT ASSEMBLY
1
Assemble the treadmill.
A
A
B
14
5
2
44
35

TOOLS REQUIREDDISPLAY MONITOR
Pg. 5
•Max speed is 7.5 miles/hour and minimum
speed is 0.6 miles/hour.
•After pushing “START”, the treadmill will
being operation at 0.6 miles/hour.
- Start: Power on the treadmill.
- Prog: Choose a workout program.
- Mode: Switch display between speed,
elapsed time, calories burned, or scan.
Scan: Display automatically toggles
between speed, elapsed time, and
calories burned.
- Stop: Stop treadmill operation.
- +:Increase speed
- -:Decrease speed
- Quick select speed options
- Safety key
SPEED (mph)
MODEPROG
START STOP
+
_
0.5 2.0 5.54.0 7.5
DISTANCE
SCAN SPEED TIME CAL
SPEED
TOOLS REQUIREDWORKOUT PROGRAMS
• Press “PROG” to choose between three
30-minute workout programs:
- Beginner: an introductory workout with
a speed range of 1 to 5.
- Intermediate: a moderate workout with
a speed range of 1 to 8.
- Advanced: a dicult workout with a
speed range of 2 to 9.
• Press “START” to begin a workout program.
Note: you cannot increase or decrease
speed during a workout program.
• Press “STOP” or remove the safety key to
stop a program and end your workout.
• For an emergency stop, pull out the
safety key.
SPEED
TIME
99
90
80
70
60
50
40
30
20
10
1.5 3 4.5 6 7.5 9 10.5 12 13.5 15 16.5 18 19.5 21 22.5 24 25.5 27 28.5 30
99
90
80
70
60
50
40
30
20
10
1.5 3 4.5 6 7.5 9 10.5 12 13.5 15 16.5 18 19.5 21 22.5 24 25.5 27 28.5 30
99
90
80
70
60
50
40
30
20
10
1.5 3 4.5 6 7.5 9 10.5 12 13.5 15 16.5 18 19.5 21 22.5 24 25.5 27 28.5 30
SPEED
TIME
SPEED
TIME
BEGINNER
INTERMEDIATE
ADVANCED

FOLD:
1. Loosen the part 2 knob and lift up on the running board to fold the treadmill.
2. Secure the frame to the running board by tightening the part 1 knob on the left handrail.
UNFOLD:
1. Release the tension on the part 1 knob and unfold the treadmill.
2. Tighten the part 2 knob to lock the treadmill in place.
FOLDING/UNFOLDING
1
2
Pg. 6
• Place a hand on a heart rate grip reader during your
workout to monitor your heart rate.
ERROR CODES
ERR: The safety key is removed
E2: Motherboard error
E4: Motherboard error
E5: Overcurrent protection
E6: Motor error
E7: Interrupted communication
E8: Overload error
TOOLS REQUIREDHEART RATE MONITOR

Pg. 7
TROUBLESHOOTING
RUNNING BELT DEVIATES TO THE LEFT
1. Start the treadmill at 1-1.5 miles/hour.
2. Use the provided hex key to turn the
screw on the back left of the
machine clockwise.
3. Let the machine run for 1 to 2 minutes
and adjust as necessary until the belt is
in the center of the running board.
RUNNING BELT DEVIATES TO THE RIGHT
1. Start the treadmill at 1-1.5 miles/hour.
2. Use the provided hex key to turn the
screw on the back right of the machine
counterclockwise.
3. Let the machine run for 1 to 2 minutes
and adjust as necessary until the belt is
in the center of the running board.
RUNNING BELT STUCK IN PLACE
1. Use the provided hex key to turn both
screws on the back of the machine
clockwise until the issue is solved.
1. Pull up on the running belt to reveal the running board.
2. Apply silicone oil directly to the running board underneath the running belt.
3. Turn the treadmill on and let it run for 3 minutes.
4. Repeat this after 30 hours of treadmill use to extend the life of the treadmill.
APPLYING SILICONE OIL

Pg. 8
ASSEMBLY IS COMPLETE!
All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the
item is returned in its original product packaging and all accessories from its original shipment are included. All
returned items will receive a full refund back to the original payment method. All returned items will not be charged
a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best Choice
Products Customer Service Representative when the return request is submitted. Items received without an RA
may not be accepted or may increase your return processing time. Once an item has been received by Best Choice
Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If the
reason for return is a result of an error by Best Choice Products then Best Choice Products will provide a pre-paid
shipping label via email. Boxes for return shipping will not be provided by Best Choice Products, and is the
customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items returned are
not considered undamaged until they are received by Best Choice Products and verified as such. All damages to
items are the customer’s responsibility until the item has been received by and acknowledge by Best Choice
Products as undamaged.
CONTACT US; WE’RE HERE 7 DAYS A WEEK TO HELP YOU!
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
PRODUCT WARRANTY INFORMATION
bestchoiceproducts.com customerservice@
bestchoiceproducts.com 844.948.8400 LEARN MORE!