BE Ag & Industrial AGRI EASE DIAMOND HARROW HAR40S User manual

PURCHASE DATE MODEL NO. DEALER
DIAMOND HARROW
HAR40S
ASSEMBLY INSTRUCTIONS
FOR MODELS:
• HAR40S

HAR40S ASSEMBLY INSTRUCTIONS 1
PARTS LIST
A. 2x - 2 Hole Beam
B. 2x – 3 Hole Beam
C. 2x – 5 Hole Beam
D. 5x – 4 Hole Beam (Short)
E. 2x – 4 Hole Beam (Long)
F. 2x – Hook Bar
G. 2x – Hook Assembly
H. 20x – Tine, washer, and nut
A
B
C
D
E
F
AD
G
H
Parts
1. 1x Part A
2x Part D
2x Part H
ASSEMBLY INSTRUCTIONS
Instructions
Fasten Part A to the ends of Parts D, using H parts as shown.
H
A
H
*Recommended tools: 22 mm & 16 mm spanners
or 7/8” and 5/8” spanners

2 HAR40S ASSEMBLY INSTRUCTIONS
2. 1x Part F
1x Part G
1x Part H
3. 1x Part B
1x Part H
Parts Instructions
Fasten Part F to smaller hole using Part G, then using Part H
hold the other side in place, as shown.
Ensure that Part G and F are assembled correctly, as shown in
close-up photo.
Instructions
Fasten Part B using Part H to assembly, as shown
B
B
H
H
F
G
H
Parts
H
G

HAR40S ASSEMBLY INSTRUCTIONS 3
4. 1x Part C
2x part H
Parts Instructions
Fasten Part C using H parts to assembly, as shown
C
D
H
H
Parts
C
H
5. 1x Part D
2x part H
D
Instructions
Fasten Part D using H parts to assembly, as shown

4 HAR40S ASSEMBLY INSTRUCTIONS
6. 1x Part F
1x Part G
1x Part H
7. 1x Part C
2x Part H
FH
Instructions
Fasten Part F to smaller hole using Part G, then using Part H
hold the other side in place, as shown.
Ensure that Part G and F are assembled correctly, as shown in
close-up photo.
Instructions
Fasten Part C using H parts to assembly, as shown
Parts
Parts
G
F
G
H
C
C
H
H

HAR40S ASSEMBLY INSTRUCTIONS 5
8. 1x Part D
2x Part H
9. 1x Part D
2x Part H
Instructions
Fasten Part D using H parts to assembly, as shown
Instructions
Fasten Part D using H parts to assembly, as shown
Parts
Parts
H
H
H
D
D
D
D
H

6 HAR40S ASSEMBLY INSTRUCTIONS
11. 1x Part A
2x Part H
A
H
Instructions
Fasten Part A using H parts to assembly, as shown
10. 1x Part B
3x Part H
Instructions
Fasten Part B using H parts to assembly, as shown
Parts
Parts
H
B
B
H
H
A

HAR40S ASSEMBLY INSTRUCTIONS 7
12. 1x Part E – 4 Hole Beam
(Long)
13. 1x Part E – 4 Hole Beam
(Long)
E
E
Instructions
Loosen and remove nuts shown, then add part E to assembly
as shown. Tighten nuts to assembly, once part E is added
Instructions
Loosen and remove nuts shown, then add part E to assembly
as shown. Tighten nuts to assembly, once part E is added
Parts
Parts
E
E

PHONE: [phone]
FAX: [phone]
TOLL FREE PHONE: [phone]
TOLL FREE FAX: [phone]
BRABEREQ.COM
[e-mail]