Beam RST200 Instruction Manual

Remote Satellite Modem
RST200
Installation & User
Manual
Beam Communications Pty Ltd

RST200 INSTALLATION & USER MANUAL
2
Remote Satellite Modem
RST200
Installation &
User
Manual
Beam Communications Pty Ltd
8 Anzed Court, Mulgrave,
Victoria, 3170, AUSTRALIA
Information furnished by Beam Communications Pty Ltd (Beam) is believed to be accurate and
reliable. However, no responsibility is assumed by Beam for its use, or for any infringement of patents
or other rights of third parties, which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Beam. Beam reserves the right to change specifications
at any time without notice.
Copyright © 2005 Beam Communications Pty Ltd. All rights reserved
Product name: RST200 Installation & User Manual
Part Number: USRMAN000302
Manual revision: 02
Release date: April 2005

RST200 INSTALLATION & USER MANUAL
3
Contents
CONTENTS........................................................................................................................................................... 3
SAFETY INFORMATION.................................................................................................................................... 5
WELCOME............................................................................................................................................................ 6
Conventions in this Manual ............................................................................................................................ 6
ABOUT BEAM COMMUNICATIONS ............................................................................................................... 7
WHAT IS THE RST200?..................................................................................................................................... 8
The Front Panel .............................................................................................................................................. 9
The Rear Panel................................................................................................................................................ 9
The RST200 Status Indicators....................................................................................................................... 10
Display Status Indicators .............................................................................................................................. 10
PACKAGE CONTENTS.................................................................................................................................... 12
THE RST200 PACKAGE CONTAINS:................................................................................................................. 12
OPTIONAL ACCESSORIES ................................................................................................................................. 12
GETTING STARTED......................................................................................................................................... 13
WHAT IS A SIM CARD?..................................................................................................................................... 13
SIM CARD PROTECTION .................................................................................................................................. 13
INSTALLING/REMOVING THE SIM CARD........................................................................................................... 13
PIN DETAILS............................................................................................................................................. 15
INSTALLING RST200....................................................................................................................................... 16
MOUNTING THE RST200.................................................................................................................................. 16
Mounting methods......................................................................................................................................... 17
CONNECTING THE POWER CABLE .................................................................................................................... 18
CONNECTING THE INTELLIGENT HANDSET OR IN-VEHICLE HANDS-FREE ....................................................... 19
CONNECTING THE LAPTOP ............................................................................................................................... 20
CONNECTING TO THE LOG PORT...................................................................................................................... 20
CONNECTING THE ANTENNA CABLE................................................................................................................. 21
INSTALLING THE ANTENNA ......................................................................................................................... 22
PLANNING THE ANTENNA INSTALLATION .......................................................................................................... 22
INSTALLATION OPTIONS .................................................................................................................................... 23
DATA TERMINAL SETTINGS FOR AUTO-ANSWERING AN INCOMING DATA CALL................................................ 24
REMOTE CONFIGURATION........................................................................................................................... 25
RST970 INTELLIGENT HANDSET USE.............................................................................................. 27
INTELLIGENT HANDSET USE (OPTIONAL).......................................................................................................... 27
Connecting the Intelligent Handset............................................................................................................... 27
IN-VEHICLE HANDS FREE KIT (OPTIONAL) ............................................................................................. 28
Installation of In-vehicle Hands-free ............................................................................................................ 28
ANTENNA INSTALLATION GUIDES ............................................................................................................ 29
EXAMPLES......................................................................................................................................................... 29
Maritime Installations................................................................................................................................... 29
Fixed Building Installations.......................................................................................................................... 29
Mobile / Transport Installations ................................................................................................................... 30
Heavy Machinery Installations ..................................................................................................................... 30
INSTALLING ANTENNA CABLES ......................................................................................................................... 30
PROTECTING THE ANTENNA FROM LIGHTNING ................................................................................................ 31

RST200 INSTALLATION & USER MANUAL
4
ASSURING QUALITY OF IRIDIUM SERVICE ............................................................................................. 32
OBSTRUCTIONS................................................................................................................................................ 32
CABLING............................................................................................................................................................ 32
RF INTERFERENCE........................................................................................................................................... 33
SYMPTOMS OF RF INTERFERENCE .................................................................................................................. 34
MITIGATION OF RF INTERFERENCE.................................................................................................................. 34
Recommended Operating Distances: ............................................................................................................ 35
Inmarsat Mini-M ........................................................................................................................................... 35
Inmarsat-C (CAPSAT) .................................................................................................................................. 35
SPECIFICATION SUMMARY .......................................................................................................................... 36
RS232 SPECIFICATION .................................................................................................................................. 37
PHYSICAL CONNECTION ................................................................................................................................... 37
RS232 PORT SIGNAL SUPPORT AND HANDSHAKING...................................................................................... 37
RS232 PORT ELECTRICAL PARAMETERS........................................................................................................ 38
TROUBLESHOOTING THE RST200 ............................................................................................................. 39

RST200 INSTALLATION & USER MANUAL
5
Safety Information
Note: Read the following information before installing and using the BEAM
RST200.
Your RST200 is a low power radio transmitter and receiver. When it is ON, it receives
and sends out radio frequency (RF) signals.
The design of your RST200 system complies with international safety standards.
Refer to the appropriate section of the RST200 User Manual for additional relevant
safety information.
Warning: Do not open equipment. There are no user-serviceable
parts inside.
If a DC power supply is to be used, its output must comply with the
Safety Extra Low Voltage (SELV) requirements of IEC60950.
All connectors except the Line and Accessory sockets must only be connected to
equipment ports which comply with the Safety Extra Low Voltage (SELV)
requirements of IEC60950.”
Note: This manual is only for RST200 Terminals with a serial number
with the following prefix:
Serial Numbers 200AXXXX “ The serial number must contain an “A”
to support the Intelligent Handset RST970 & RST973 In-vehicle
Hands-free kit. accessories.

RST200 INSTALLATION & USER MANUAL
6
Welcome
Welcome to the Beam RST200, the intelligent remote satellite modem.
This Installation and User manual contains all the information you need to configure
the Beam RST200 and discover the advantages of Beam Communications and
Iridium Network technology.
Conventions in this Manual
Warnings, cautions and notes appear throughout this manual.
They are represented by following conventions.
Warning: This symbol and associated text indicate a warning
note providing information to prevent personal injury or damage
to equipment.
Note: This symbol and associated text indicate a note providing
general operating information.
Interference: All wireless phones may get interference, which
could affect performance.

RST200 INSTALLATION & USER MANUAL
7
About BEAM Communications
Beam Communications, is an authorised manufacturer of Iridium Satellite products.
Beam develops subscriber products that utilise the Iridium satellite network of Low
Earth Orbit satellites, known as LEOs. The Iridium network is extensively used
around the world by commercial enterprises and defence agencies.
Beam products address the needs of individuals, communities, government agencies
and the corporate sector, providing voice and data access without the need for
traditional wire-line or mobile phone infrastructure.
As the Iridium satellite network is global, Beam’s products address global markets,
across the spectrum of rural and remote users, including households, motor vehicles,
telemetry, maritime and emergency services.

RST200 INSTALLATION & USER MANUAL
8
What is the RST200?
The RST200 is a Remote Satellite Modem designed to provide a reliable and cost
effective voice and or data service connection when a wired connection is not
available. It does this by providing a standard modem interface to the Iridium network
— a satellite-based, wireless communications network that enables remote
communication.
The RST200 allows the connection of a proprietary intelligent handset for voice
telephone handsets and other data terminal telecommunications devices.
The RST200 emulates the functionality of a Hayes compatible modem, providing a
serial socket for a computer, a socket for the connection of a plug-pack type mains
power supply and a connection to an external antenna.
The RST200 provides a serial control interface and audio input and outputs by way of
the transceiver’s control and connection interface. The RST200 interprets the signals
from the subscriber equipment and constructs control signals to the transceiver.
In addition, the RST200 incorporates a signal strength meter to assist in
implementation and in-call performance.
The RST200 from Beam Communications brings you all the convenience and ease
of use of a basic Voice and Data services anywhere in the world using the Iridium
Satellite phone system. RST200 Overview

RST200 INSTALLATION & USER MANUAL
9
The Front Panel
Figure 1 - The RST200 front panel
Status LEDS
1. Power
2. Data
3. SMS waiting
4. DTR TX/RX
5. Signal strength
The Rear Panel
Figure 2 - The RST200 rear panel
Connectors
1. Antenna
2. Power 11-32V DC
3. RJ45 Intelligent Handset / In-vehicle Hands free Connector
4. Comm.’s Port
5. Log Port
6. Reset Switch

RST200 INSTALLATION & USER MANUAL
10
The RST200 Status Indicators
The status indicators are located on the front panel of the RST200. The LED lights on
the front panel show the RST200 status.
Note: The LED lights blink in different combinations to indicate
transmission status.
Display Status Indicators
Power
When the RST200 powers up, the Power indicator flashes while it carries out internal
self-diagnosis, and then goes steady green and remains lit while power is applied to
the RST200.
If the Power indicator does not illuminate at all when you switch on the RST200,
check the power supply to the RST200.
If the Power indicator flashes rather than illuminates continuously after a few
seconds, the RST200 may require service. Contact your service provider.
DTR
The DTR indicator indicates whether DTR is asserted.
SMS Waiting
The SMS Waiting LED flashes to indicate an SMS message is waiting.
Data Status
The Call Status indicator indicates the status of the call. The Call status indicates:
• In Call
• Incoming call

RST200 INSTALLATION & USER MANUAL
11
Signal Strength
The Signal Strength LED gives an indication of how strong the signal is from the
Iridium network at your location. This LED displays different colours to indicate the
strength of the RF (Radio Frequency) signal and different on/off conditions to indicate
the terminal status.
Indictor colour Signal strength
Flashing RST200 is registering with the network – please
wait
Green Strong
Orange Acceptable
Red No signal, problem with installation or no access
The Signal Strength LED reading will vary in status in relation to the quality of the
Signal being received by the terminal. There are many factors that will affect the
signal strength including, local RF interference, poor antenna cabling or exceeding
the 3DB loss limit, poor line of sight or other environmental conditions affecting signal
penetration to the antenna system.

RST200 INSTALLATION & USER MANUAL
12
Package Contents
The RST200 package contains:

1 RST200 unit

1 universal plug-pack power adapter, 110-240V AC

1 9-pin-to-9-pin RS-232 cable

1 user manual in hard copy

Allen Key

Mounting Brackets

Mounting Bracket Screws

1 CD including; at command set, installation guide, user guide and intelligent
handset manual
Optional Accessories
Alert / Monitoring Interface
Battery Backup Sub-System
In-vehicle Hands-free kit
Motorola Intelligent handset (uses RJ45 port)
Cable Kit
Antenna
External Ringer
See your Service Provider for pricing and availability of these optional accessories

RST200 INSTALLATION & USER MANUAL
13
Getting Started
What is a SIM Card?
A SIM Card (Subscriber Identity Module) is a small smart card that carries your
identity for accessing the network and receiving calls. It functions as the digital
memory of the RST200 and also stores your personal information, including received
SMS messages.
SIM Card Protection
Scratching or bending the SIM card can easily damage the card or its metal contacts.
Handle the SIM card with care. Avoid exposing the card to static electricity, water or
dirt.
Installing/Removing the SIM Card
The SIM card is stored in a recess in the SIM card compartment located at bottom of
your RST200.
If your service provider does not preinstall the SIM card, perform the following steps
to install it
.
Warning: Make sure the RST200 is switched off before you
insert or remove the SIM card. If you do not, the memory on
your SIM card and or the SIM card itself may be damaged.

RST200 INSTALLATION & USER MANUAL
14
1. Using a Phillips-head screw, remove the holding screw and keep it in a safe
place.
2. Slide-open the compartment cover.
3. Remove the screws with the Allen Key provided to expose the SIM Holder of
the transceiver
.
4. Insert the SIM card into the slot. Make sure that the golden connectors are
facing downwards.
5. Replace the cover an Allen screws
6. Slide shut the compartment cover into its place.
7. Screw the holding screws back.

RST200 INSTALLATION & USER MANUAL
15
PIN Details
The RST has a number of different PIN’s, each one to perform or limit certain functions. The
table below identifies these PINS, their function and a place for you to note the setting for
your unit.
PIN Name Function Indication that
entry of PIN is
required
Your PIN
SIM PIN
Supplied by your
Service Provider
Enables calls to be
made if SIM is
locked
Signal light
flashes Red
PUK
Supplied by your
Service Provider
Unlocks a locked
SIM card
Signal light
flashes Red
User PIN
Supplied with this
manual
Allows access to
user menu of
RST200 via log port
Enter PIN on
console
9876 Default
Supervisor PIN
Supplied with this
manual
Allows access to
supervisor menu of
RST200 via log port
Enter PIN on
console
3170 Default

RST200 INSTALLATION & USER MANUAL
16
Installing RST200
This chapter explains how to install the RST200 and the Iridium fixed-mast antenna.
Warning: Make sure the RST200 is switched off before you
install the cables. If you do not, the RST200 may be
damaged.
Note: Before you install the RST200, determine if the unit is
preconfigured or needs customer configuration.
Mounting the RST200
The RST200 comes with two (2) standard right angle mounting brackets that allow
mounting for mobile and fixed positioning.
Note: To ensure sturdy mount attachment:
1. Mount the RST200 on a clean, even surface.
2. Clean the mount surface of the RST200.
3. Use the correct type of screws.
4. If mounting on a wooden surface, make sure the wood
is structurally sound.
5. Leave enough room around the RST200 to allow
unhindered access to the rear panel.
6. Do not install the unit in a permanently concealed
recess. You should be able to access and remove the
unit should future service be required.

RST200 INSTALLATION & USER MANUAL
17
Mounting methods
The mounting brackets allow two mounting methods: drop-in (inside corner) mount
and flush (outside corner) mount.
Figure 3 - Mounting methods
To install the RST200 unit:
1. Attach the two (2) mounting brackets securely to a suitable structure making
sure the space between the brackets is wide enough to smoothly slot in the
RST200.

RST200 INSTALLATION & USER MANUAL
18
2. Secure the RST200 unit to the mounting brackets using supplied screws.
3. Carefully slot the RST200 between the two mounting brackets and secure with
the retaining screws.
Connecting the Power Cable
1. Make sure the AC power switch supplying the RST200 power pack is off.
2.
3. Plug in the power cable into the power jack located on the rear panel of the
RST200.
4. Secure the cable by tightening the plug retainer.

RST200 INSTALLATION & USER MANUAL
19
Connecting the Intelligent Handset or In-Vehicle Hands-free
1. Plug the Intelligent handset or the in-vehicle hands free unit into the Handset
Connector of the RST200
2. Ensure the power is turned off when connecting the device
3. If the handset should ever lock up at any time, then power cycling the terminal
will reset the peripheral device.

RST200 INSTALLATION & USER MANUAL
20
Connecting the Laptop
1. Plug the laptop cable into the Comm.’s port of the RST200.
Connecting to the Log Port
1. Connect the laptop to the log port. The LOG port should only be used for
configuration and control of the terminal equipment. The LOG port should not
be used for Communications or Data Services
.
2. The LOG Port can also be used when using a Beam Alert/Monitoring Device,
refer to the instruction provided with the accessory device for configuration
and installation.