Beamz LCP-192 User manual

Ref. Nr. 150.660
LCP-192 LED STROBE PANEL
192 LED 5MM
MANUAL

- 2 -
Thank you for purchasing our company products. Please read these instructions carefully to enjoy
optimum performance and a longer service life before you start to use.
CONTENTS
CONTENTS............................................................................................................................................. 2
Unpacking Inspections ............................................................................................................................ 3
Unpacking instructions ........................................................................................................................ 3
Checking the contents of the carton:................................................................................................... 3
Safety Instructions................................................................................................................................... 3
Product Overview.................................................................................................................................... 4
Functions Introductions ........................................................................................................................... 4
Main Functions .................................................................................................................................... 4
Operation Instructions ......................................................................................................................... 5
Power supply connecting..................................................................................................................... 5
Power supply by storage battery..................................................................................................... 5
Master/Slave mode.............................................................................................................................. 5
Master/Slave connection................................................................................................................. 6
Sound Active Mode ............................................................................................................................. 6
Automatic Mode................................................................................................................................... 6
DIP switch setup.................................................................................................................................. 6
DMX controllable................................................................................................................................. 7
DMX Value Functions 3 CH............................................................................................................. 7
Value setup manual............................................................................................................................. 7
Diagram of value setup.................................................................................................................... 7
Setting DMX address by Dip switch................................................................................................ 8
Maintenance............................................................................................................................................ 9
Specification ............................................................................................................................................ 9
CE & R&TTE Declaration of Conformity................................................................................................ 10

- 3 -
UNPACKING INSPECTIONS
Unpacking instructions
Please unpack the carton and check the goods carefully when you receive it , if discover
packing damage, shortage or quality problem, please notify the shipper and reject the goods.
Before using this product, please read the instructions carefully and keep it in a safe place for
future reference.
Checking the contents of the carton:
The product, Power cord, Instruction Manual
SAFETY INSTRUCTIONS
Safety and regulatory power socket with high quality output should be used .
Always connect the product to a grounded circuit to avoid the risk of electrocution.
Never put tiny metal objects such as a screwdriver, iron wire and coins, etc. into the internal or
stretch into the machine in case of short circuit .
Please make sure to connect the proper voltage and do not higher or lower than that stated on
the decal or rear panel of the product .
Avoid hitting, crashing or squeezing with other objects in transportation. Never carry the
product from the power cord or any moving part . Always use the hanging / mounting bracket
or the handles.
The product is used in door only .
Never pull or tug on the cord and change it for another one , stop using it when it is damaged
or becomes hot .
Stop using the product once there is sparks when connecting with the power plug .
Can not operate product with wet hands and never place it near the water or other liquid.
Make sure there are no flammable materials close to the fixture while operating . Always install
it in a location with adequate ventilation.
Never replace the lighting source with different specification and rating when the original one
is damaged.
Make sure to power off before replacing the light source or the fuse. Never do it while it is on.
The ambient temperature is no more than 40°C(104°F) .
Never clean the fixture by water, thinner or other dissolved agent .
Stop using the product in case of a serious operating problem and send it to our maintenance
agent immediately. Never repair by non-professional workers .
Avoid direct eye exposure to the light source while the product is on.

- 4 -
PRODUCT OVERVIEW
1. Power output
2. Power input
3. DMX Dip switch
4. Signal indicator LED
5. Power indicator LED
6. Sound sensitivity adjustment
7. DMX signal output
8. DMX signal input
9. Four pin DC connector
10. Safety Eyebolt
11. Hanging bracket
12. LEDs
FUNCTIONS INTRODUCTIONS
Main Functions
3 DMX channels
Automatic, sound active and master/slave mode
Eight strobe speed effects by DIP switch, brightness and strobe speed can be adjusted
Built-in automatic display, static color, dimmer and strobe functions

- 5 -
Operation Instructions
Power supply connecting
Two sockets in the product, Power In and Power Out , the product can be supplied power by the
power out. Maximum output power of the socket is 600W .
Power supply by storage battery
The storage batteries Wi-Powerhouse provide DC 12V, can be connected through four-pin Airline
Terminal without other power supply ,when plug power 100-240V AC, the Wi-Powerhouse will stop
supplying power.
Master/Slave mode
The first unit is master without signal of DMX ,the others connected are slave units and follow the
actions of Master.
Maximum connecting machines are
50 units with the same model
POWER OUT
POWER IN
Wi-Powerhouse
(
12VDC
)

- 6 -
Master/Slave connection
p
Sound Active Mode
In this mode, DIP 9 is on without DMX or master signal. When many fixtures are connected, the first
one acts as master, others connected are slaves and follow the actions of master.
Automatic Mode
In this mode, DIP 10 is on without DMX or master signal. When many fixtures are connected, the first
one acts as master, others connected are slaves and follow the actions of master.
DIP switch setup
Mode DIP Switch
Sound Active Mode 9= ON, 1-8, 10 = OFF
Automatic Mode 10= ON, 1-9 = OFF
Function setup by Dip switch without DMX signal.
DIP1-8 Strobe（slow to fast
DIP9 Sound active
DIP10 Automatic display
Master
Slave
Slave
Continue

- 7 -
DMX controllable
With three channels, automatic display, sound activated and strobe functions can be controlled by
DMX. Speed of strobe and automatic display can be adjusted, LED brightness can also be adjusted.
DMX Value Functions 3 CH
CHANNEL VALUE FUNCTION CH 2 CH 3
1
000 – 039 Strobe 0 – 19 No strobe
10 – 255 Strobe slow-fast
Dimmer
0 – 255
100% - 0%
040 – 079 Mode 1 Speed
0 – 255
slow - fast
080 – 119 Mode 2
120 – 159 Mode 3
160 – 199 Mode 4
200 – 239 Mode 5
240 – 255 Sound No function
Value setup manual
Each one needs to setup DMX value when multiple fixtures are connected in the mode of DMX512,
data of the channels can be read by the value. With three DMX channels is the value setup for the
first 001 , 004 for the second one and 007 for the third one.
Diagram of value setup
DMX input
DMX output
Continue
First 001
004
007
Second
Third

- 8 -
Setting DMX address by Dip switch
The number of channels determines the starting address of each fixture. For example, there are two
fixtures with 6 channels and two fixtures with four channels, if the address of two fixtures with 6
channels is ahead of the others, the address of the four fixtures will be 1, 7, 13, 17 separately. If the
address of two fixtures with 4 channels is ahead of the others, the address of the four fixtures will be 1,
5, 9, 15 separately.
Address is only set by DIP1 to DIP9 and DIP10 is not be used.
DIP Addressing
1 1
2 2
3 4
4 8
5 16
6 32
7 64
8 128
9 256
Determining which switches to toggle ON given a specific desired address or value can be
accomplished in the following manner. By subtracting the largest switch value possible from the
selected start address which does not cause a negative number. For example, if you need to set the
starting address of a fixture as 43, firstly put DIP6 (32) on, DIP4 (8) on, and then put DIP2 (2), at last
DIP1 (1). Adding the value of each switch in the ON position will provide the final address, which is
32+8+2+1=43.
Example address is shown as below:
DMX address DIP on Value for DIP switch Diagram
10 DIP 4
DIP 2 8 2 (8+2 = 10)
24 DIP 5
DIP 4 16 8 (16+8 = 24)
233
DIP 8
DIP 7
DIP 6
DIP 4
DIP 1
128
64
32
8
1 (128+64+32+8+1 =233)
DMX address can be set from 1 to 512 as above.

- 9 -
MAINTENANCE
The unit should be cleaned periodically to ensure the optimum performance, the smudginess can
decrease the life of light and the output of light is affected by the dust which can make the machine
overheating. In general, make the maintenance at least two times a month. Be sure to power off the
unit before cleaning .
Do not clean until the unit recovers normal temperature since high temperature for using, use the lens
tissue or soft cotton cloth with alcohol to wipe gently.
Cleaning frequency depends on the environment in which the fixture operates, damp, smoky or dirty
surrounding can cause greater accumulation of dirt on the optics. Never rub or press strongly on the
panel.
SPECIFICATION
Voltage......................................100-240V AC 50/60Hz
Input current ..........................................................0.1A
Power.....................................................................12W
Fuse.................................................................2A 250V
Light source............................. 192x 5mm White LEDs
Weight...................................................................2.5kg
Size..........................................L356 x W70 x H240mm

- 10 -
CE & R&TTE DECLARATION OF CONFORMITY
Importer: TRONIOS BV
Bedrijvenpark Twente 415
7602 KM - ALMELO
Tel : [phone]
Fax : [phone]
The Netherlands
Product number: 150.660
Product Description: Beamz, LCP-192 LED Strobe Panel 192 LED 5mm
Regulatory Requirement: EN 60598-1/-2-17:2009
EN 62031:2008
EN 61347-2-13:2007
EN 62479:2010
EN 55015:2006/A2:2009
EN 61547:2009
The product meets the requirements stated in the above mentioned Standards. This certificate does not
cover the aspects that may be relevant such as performance and fitness for purpose.
Almelo,
10-03-2012
Signature:

- 11 -

Specifications and design are subject to change without prior notice..
www.tronios.com
Copyright © 2013 by TRONIOS the Netherlands