BeautyRelax ILIFT SMART BR-1350 User manual

Cosmetic beauty face device Beautyrelax BR-1350 User manual
1
U
US SE ER R M MA AN NU UA AL L
Cosmetic beauty face device
Beautyrelax BR-1350
ILIFT SMART

Cosmetic beauty face device Beautyrelax BR-1350 User manual
2

Cosmetic beauty face device Beautyrelax BR-1350 User manual
3
CONTENT:
NOTICE 4
CONTRAINDICATION 5
MAIN DEVICE BENEFITS 5
SKIN TREATMENT TECHNOLOGY 5
PACKAGE CONTENTS 5
DEVICE INTRODUCTION 6
EMS LIFTING 7
PHOTON THERAPY 7
RED LIGHT 630NM 8
BLUE LIGHT 480NM 9
AUTOMATIC SKIN TREATMENT PROGRAMS 10
DEVICE DESCRIPTION 12
DISPLAY DESCRIPTION 14
HOW TO USE 15
NOTES ON DEVICE USING 16
IMPORTANCE OF INDIVIDUAL PROGRAMS 17
FACIAL TREATMENT OPTIONS 18
SOLVING POSSIBLE PROBLEMS 20
FREQUENTLY ASKED QUESTIONS AND ANSWERS 21
TECHNICAL PARAMETERS 22
BATTERY CHARGING 22
CLEANING AND MAINTENANCE 22
DISPOSAL OF USED ELECTRONIC EQUIPMENT 23
CERTIFICATION 23
IMPORTER 23
DECLARATION OF CONFORMITY 24

Cosmetic beauty face device Beautyrelax BR-1350 User manual
4
Dear customer, thank you for your trust in the purchase of our product. Before using for the first
time, please read carefully all the detailed information in the operating instructions. Pay special
attention to safety warnings. Use the device exactly as instructed. All these steps will contribute to
the maximum use of all functions of the device. In this guide, we will try to bring you as close as
possible to the technologies used and how to make the best use of the device.
If you encounter any ambiguities while reading the instructions, do not hesitate to contact us at the
email address: [e-mail]
Keep the instructions for use in a safe place for future reference.
NOTICE
 Before commissioning for the first time, read these operating
instructions, view all illustrations and keep them for future reference.
 If your skin is affected by a serious skin condition, do not use the
appliance. Consult your doctor for first time use.
 The device is primarily intended for your personal use. Do not share it
with family or friends. If the device is used by more than one person, pay
special attention to the principles of hygiene.
 Never operate the appliance if it is damaged, does not work properly or
has fallen into water.
 To prevent electric shock, do not touch the inside of the unit if it is broken.
 If the unit is dropped, it may be damaged. In this case, do not continue to use the device and
contact the dealer's service department.
 Do not use the appliance near water or in places with high humidity (bath, shower, swimming
pool, etc.).
 The appliance is not washable. It must not be immersed in water or under running water.
 Do not leave the device unattended. Always switch off the appliance thoroughly after each use.
 If the unit has been moved from a very cold to a very warm environment, wait at least 3 hours
before using it.
 The appliance is not intended for use by children or persons whose physical or mental condition
does not allow safe use of the appliance.
 Do not place or use the appliance on hot heat sources (radiator, stove, fire, etc.)
 Do not attempt to disassemble or repair the device yourself.
 Store the device in a dry environment. Try to protect it from dust.
 Do not expose the device to direct sunlight.
 The distributor is not liable for damage caused by improper use contrary to the instructions in
these operating instructions. He is not responsible for the consequences caused by non-
compliance with the safety instructions.
 The distributor is not liable for any damage to health or property during other uses.

Cosmetic beauty face device Beautyrelax BR-1350 User manual
5
CONTRAINDICATION
Under no circumstances may the device be used by persons who are affected by any of the following
conditions:
 Cancer, epilepsy, viral disease
 In case of high fever
 Severe kidney or liver disease
 Heart disease, pacemaker, hypertension
 Metal implants in the body
 Vascular disorders or atherosclerosis
 Pregnancy
 Menstruation
 Acnitic keratosis, basal cell carcinoma, melanoma, spinalioma, atopic eczema, contact
eczema, solar dermatitis, psoriasis
 People taking anticoagulants
 Persons who require constant supervision may only use the device after consulting a doctor
 Never move the device on the eyelids, temples or thyroid gland
MAIN DEVICE BENEFITS
 Highly effective solution for routine skin treatment.
 Modern technologies used in beauty salons.
 Automatic programs for easy use of the device.
 Designed for mature skin with reduced skin elasticity.
 Non-invasive nature of treatment.
 Really achievable effects with regular use.
SKIN TREATMENT TECHNOLOGY
1. EMS pulse therapy.
2. Photon therapy: red light: 630nm, blue light: 480nm.
3. Heat therapy: effects of heat and cold.
4. Intensive vibrating massage.
PACKAGE CONTENTS
 Beauty device Beautyrelax BR-1350 ILIFT SMART.
 USB charging cable.
 Operating Instructions.

Cosmetic beauty face device Beautyrelax BR-1350 User manual
6
DEVICE INTRODUCTION
The BeautyRelax iLift Smart represents 4 different devices in one design. It offers truly effective
technologies for routine treatment of your skin: EMS pulse lifting, photon light, heat therapy and
intensive vibrating massage. Automatically preset programs will guide you through the entire skin
treatment process. Make your own beauty salon right at home!

Cosmetic beauty face device Beautyrelax BR-1350 User manual
7
EMS LIFTING
The face is interwoven with a dense muscle structure. The facial muscles form a group of muscles
that result in facial expression and facial expressions. During life, however, it loses its elasticity and
elasticity. The power and frequency of the electrical pulses are specially adjusted to allow facial
treatment. Upon contact with the skin, the application head of the cosmetic device transmits gentle
electrical pulses, which penetrate through the upper part of the skin directly to the facial muscles.
The muscles contract and thus strengthen them. Collagen and elastic fibers are mechanically
stimulated. In the facial area, you will improve the texture of the skin, its tone and increase elasticity.
The skin has a rejuvenated and radiant appearance. Cosmetic devices with the function of electrical
muscle stimulation are used exclusively for facial treatment. The application head stimulates those
parts of the face where there is the largest adipose and muscle tissue. It improves the flexibility and
strength of fine facial muscles.
KEY EFFECTS OF EMS TECHNOLOGY
 support of facial blood circulation
 stimulation of the lymphatic system of the face
 increase skin elasticity
 reduction of fine mimic wrinkles
 collagen fiber remodeling
 increase the flexibility of facial contours
PHOTON THERAPY
Light is a simply visible part of electromagnetic radiation of different frequencies. It reaches different
wavelengths in the range of 390 to 760nm (nanometers). The human eye is able to perceive light in
wavelengths ranging from 400 to 800 nm. In photon therapy, light penetrates the body as a stream
of energy in the form of photons. It is scientifically proven that different wavelengths of light result in
specific skin care effects. Studies have verified the real positive therapeutic benefit for living tissues
and organisms at the cellular level.
Inflammatory diseases can occur due to illness, injury or stress. Light therapy naturally stimulates the
healing power of cells. Light can enter the cell non-invasively and painlessly. Light activates
photoreceptors in cells. Photon therapy does not cause any side effects or damage to the body.
Thanks to its positive effects, it has gained popularity not only in the field of dermatology, but also in
the cosmetic skin treatment segment.
REAL POSITIVE CONTRIBUTION TO LIVE
TISSUES AND CELL LEVEL ORGANISMS
 Photon light can enter the cell non-invasively and painlessly.
 Light activates photoreceptors in cells.
 Light therapy naturally stimulates the healing power of cells.
 Photon therapy does not cause any side effects or damage to the body.
 It solves inflammatory diseases due to illness, injury or stress.

Cosmetic beauty face device Beautyrelax BR-1350 User manual
8
RED LIGHT 630NM
 supports the natural production of collagen
 beneficial effect on elastic fibers
 increasing the efficiency of absorption of active substances of cosmetic products
 improving blood circulation in the subcutaneous tissue
 prevents the formation of pigment

Cosmetic beauty face device Beautyrelax BR-1350 User manual
9
BLUE LIGHT 480NM
 activates porphyrins
 a chemical reaction that destroys harmful bacteria
 antibacterial and anti-inflammatory effect
 prevention of acne
 safe and effective treatment

Cosmetic beauty face device Beautyrelax BR-1350 User manual
10
AUTOMATIC SKIN TREATMENT PROGRAMS
The Beautyrelax BR-1350 ILIFT SMART cosmetic device offers more treatment functions. For easy
use, they are included in 5 automatic programs. This makes it as easy to use as possible and
contributes to achieving the desired results.
Example of using the device in skin cleansing mode in combination with a cloth on
the applicator.

Cosmetic beauty face device Beautyrelax BR-1350 User manual
11
1. HLOUBKOVÉ ČIŠTĚNÍ
The application head raises the temperature to a level of around 42 ° C, which significantly
contributes to the opening of skin pores before starting to cleanse the skin. High-frequency vibrating
massage for intensive skin cleansing. Dirt from the skin is caught in a cloth or napkin, which can be
attached to the applicator with a magnetic ring.
2. COOLING THE SKIN BY REFRIGERATION
The application head lowers the temperature to a level of 6 ° C. The skin is soothed and the skin
pores contract.
3. EMS PULSE LIFTING
Apply a thin layer of clear conductive gel on the skin. Electric pulses gently stimulate the facial
muscles. EMS non-invasive lifting significantly contributes to increasing skin elasticity. Highlights
facial contours.
4. HYDRATION MODE
Multiple improvement in the penetration of cosmetic cream or serum. The active ingredients
penetrate better through the upper layer of the skin into the dermis layer.
5. COLLAGEN FIBER REGENERATION MODE
Once the skin is sufficiently hydrated, the combination of heat therapy and EMS pulse lifting will
provide intense stimulation of collagen and elastic fibers.
In each of the preset modes, you can use the LED button to turn on any photon light - red or blue. .

Cosmetic beauty face device Beautyrelax BR-1350 User manual
12
DEVICE DESCRIPTION
1. Application head
A. EMS contact surfaces
B. Contact area of heat therapy
2. LCD display
3. Charging cable input
4. USB charging cable
5. ON / OFF and MODE button
6. Photon light button
7. EMS level and temperature
8. Plastic ring for attaching a cloth or
napkin
A
A
A
A
B

Cosmetic beauty face device Beautyrelax BR-1350 User manual
13
DEVICE DESCRIPTION
1. Screw cover
2. Cooling fan grille
3. Conduction side strap

Cosmetic beauty face device Beautyrelax BR-1350 User manual
14
DISPLAY DESCRIPTION
1. Battery status indication
2. Intensity level
3. Display the current skin
treatment regimen
4. Timer

Cosmetic beauty face device Beautyrelax BR-1350 User manual
15
HOW TO USE
1. Press and hold the ON / OFF button for 3 seconds to turn on the device.
The default treatment mode is the CLEAN program in level 1. Use a plastic
ring to attach any cloth or napkin to which dirt from the skin sticks. The
application head of the device vibrates and the temperature rises. If
necessary, you can adjust the temperature using the LEVEL button (low 1,
medium 2, high 3). You can also activate the photon light by pressing the LED
button. The preset treatment time in this step is 5 minutes. After this time,
the device switches off automatically.
2. Press and hold the ON / OFF button for 3 seconds to switch on the
device. Use the ON / OFF button to switch to the COOL application head
cooling mode. The application head vibrates at the same time. You can adjust
the effect of the cold (low 1, medium 2, high 3) using the LEVEL button as
required. The preset treatment time in this step is 2 minutes. After this time,
the device switches off automatically.
3. Press and hold the ON / OFF button for 3 seconds to switch on the
device. Use the ON / OFF button to switch to EMS lifting mode. The
application head vibrates and generates electric micropulses EMS. According
to your needs, you can use the LEVEL button to adjust the intensity of the
EMS micropulses (low 1, medium 2, high 3). The preset treatment time in this
step is 5 minutes. After this time, the device switches off automatically.
4. Press and hold the ON / OFF button for 3 seconds to switch on the
device. Use the ON / OFF button to switch to HYDRATION mode. The
application head vibrates, its temperature increases and the EMS electrical
pulses function is activated. According to your needs, you can use the LEVEL
button to adjust the intensity of the EMS micropulses (low 1, medium 2, high
3). The preset treatment time in this step is 5 minutes. After this time, the
device switches off automatically.
5. Press and hold the ON / OFF button for 3 seconds to switch on the
device. Use the ON / OFF button to switch to the collagen fiber support
mode. The application head vibrates, its temperature decreases and the EMS
electrical pulses function is activated. According to your needs, you can use
the LEVEL button to adjust the intensity of the EMS micropulses (low 1,
medium 2, high 3). The preset treatment time in this step is 2 minutes. After
this time, the device switches off automatically.
In each of the preset modes, you can turn on using the LED button
any photon light - red or blue.

Cosmetic beauty face device Beautyrelax BR-1350 User manual
16
NOTES ON DEVICE USING
1. The vibration function only works when your fingers are in contact with the guide straps on the
sides of the device while holding the device. Otherwise, the application head will not generate
vibrations. When your fingers come in contact with the guide straps, the circuit between you
and the machine closes. The device recognizes the contact and then activates the vibration. This
way you can only treat yourself. If you try to treat another person's skin, the vibration will not
work.
2. If you do not want the vibration function to be activated, hold the device away from the area
where the side conduction straps are.
3. When the time on the display has elapsed, the device always switches off automatically. If you
want to use another skin treatment mode, you must switch the device on again using the ON /
OFF button.
4. When the device is switched off, the internal components of the device cool down using the fan
on the back of the device. Never cover the back of the device. Free access to the air flow must
be maintained. The fan switches off automatically when the device is switched off.
5. When using a photon LED light, do not look directly at the light source. No goggles are required
to use the device. Just try to avoid a long direct view of the light. This protects your eyesight in
the long run.
6. Electric micropulses generate 4 smaller applicators around the perimeter of the application
head. If you want to use the EMS function as effectively as possible, during the treatment, try to
keep the entire application head in full contact with the skin.
7. For the EMS mode to work properly, it is necessary to increase the conductivity of the skin with
sonogel or another water-based cosmetic. In general, substances without added dyes or flavors
that could irritate sensitive skin are better. You need to try what type of product your skin
tolerates best.

Cosmetic beauty face device Beautyrelax BR-1350 User manual
17
IMPORTANCE OF INDIVIDUAL PROGRAMS
1. DEPTH CLEANING
It is advisable to thoroughly cleanse the skin before each skin
treatment. Place a cloth or napkin on the application head and secure
with a plastic ring. Gradually treat the entire face with long or circular
movements. A cloth or napkin catches any dirt. The application of heat
opens the pores, which helps to clean it. Remove the cloth before the
next skin treatment step.
2. COOLING THE SKIN BY REFRIGERATION
In this program, the application head cools down. Moving on the face
will gradually soothe the skin. The skin pores shrink.
3. EMS PULSE LIFTING
Apply a thin layer of clear conductive gel on the skin. Electric pulses
gently stimulate the facial muscles. EMS non-invasive lifting
significantly contributes to increasing skin elasticity. Highlights facial
contours.
4. HYDRATION MODE
Multiple improvement in the penetration of cosmetic cream or serum.
The active ingredients penetrate better through the upper layer of the
skin into the dermis layer.
5. COLLAGEN FIBER REGENERATION MODE
Once the skin is sufficiently hydrated, the combination of heat therapy
and EMS pulse lifting will provide intense stimulation of collagen and
elastic fibers.
In each of the preset modes, you can turn on using the LED button
any photon light - red or blue.

Cosmetic beauty face device Beautyrelax BR-1350 User manual
18
FACIAL TREATMENT OPTIONS
FOREHEAD:
move away from the center
facing the edge, gradually cover the entire
area
NOSE:
move from the forehead around the
nose to the face, from top to bottom
FACE:
move your face in the direction
bottom to top
CHIN:
Move from the tip of the chin along the
contours of the face, from bottom to top
T ZONE
:
move from forehead to the tip of the
nose
NECK:
Move from the chin towards the ear
and then down to
the neck

Cosmetic beauty face device Beautyrelax BR-1350 User manual
19

Cosmetic beauty face device Beautyrelax BR-1350 User manual
20
SOLVING POSSIBLE PROBLEMS
Problem Possibility reason Solution
The device cannot be
switched on.
The effect of electric micropulses is
too strong. The ON / OFF button is not
pressed long enough.
Press the ON / OFF button for 3
seconds.
The device is connected to a USB
charging cable.
Disconnect the device from the
power cord before using the device.
The battery is empty. Charge the device battery sufficiently
before use.
Charging problem.
The charging cable is not sufficiently
connected to the USB port of the
computer or laptop.
Reconnect the end of the charging
cable to the USB port of a computer
or laptop.
The charging cable is not connected to
the device sufficiently.
Reconnect the end of the charging
cable from the device.
The charging cable is damaged. Replace the charging cable with a
new one.
The effect of electric
micropulses is too
strong.
The intensity level is too strong. Decrease the intensity level to 1.
Cosmetic cream is on the skin in too
small an amount or not at all.
Apply more cream to the skin to
increase skin conductivity..