Bebe Care 096328M User manual

IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
BEBE CARE CRIB MODEL # 096328M

2
Read all instructions before assembly and use of the crib. Keep instructions for future
use.
FAILURETO FOLLOWTHESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
FALL HAZARD
• TO HELP PREVENT FALLS,DO NOT USETHIS PRODUCT WHENTHE INFANT BEGINS
TO PUSH UP ON HANDS AND KNEES OR HAS REACHED MANUFACTURER’S
RECOMMENDED MAXIMUM WEIGHT,OF 8KGS,WHICHEVER COMES FIRST.
SUFFOCATION HAZARD
INFANTS HAVE SUFFOCATED:
• IN GAPS BETWEEN AN EXTRA PAD AND SIDE OFTHE BASSINET/CRADLE.
• ON SOFT BEDDING.
USE ONLYTHE PAD PROVIDED BY MANUFACTURER NEVER ADD A PILLOW,COMFORTER OR
ANOTHER MATTRESS FOR PADDING.
TO REDUCE THE RISK OF SUDDEN INFANT DEATH SYNDROME (SIDS),PAEDIATRICIANS
RECOMMEND HEALTHY INFANTS BE PLACED ONTHEIR BACKTO SLEEP,UNLESS OTHERWISE
ADVISED BYYOUR PHYSICIAN.
SAFETY PRECAUTIONS
WARNING
DO NOT use this product if any part is torn,broken or missing.
If a sheet is used with the mattress pad,use only the one provided by the manufacturer or one specically
designed to t the mattress pad.
Use bassinet with only one child at a time.
Strings can cause strangulation! DO NOT place items with a string around a child’s neck,such as hood strings
or pacier cords.DO NOT suspend strings over a bassinet or attach strings to toys.
DO NOT leave child unattended in the crib.
NEVER place crib near a window where cords from curtains can strangle a child.
Remove any tools or excess parts including plastic packaging from the crib vicinity after its assembly.
DISCONTINUE use of the crib when or before the infant can sit up by themselves.
Padding and cushioning materials,including the mattress are to be sufciently rm to preclude conforming to
the contours of the infants face.
ENSURE proper ventilation is maintained in and around the crib by limiting bed clothes,extra pillows or toys.
ENSURE the crib is placed at a reasonable distance from curtains,blinds,heaters,res,power points or any
other hazards.
Promptly replace worn out or broken parts.
CAUTION:
Recommended Mattress (supplied) size is 790mm long x 410mm wide x 30mm in thickness maximum. It
is recommended that the mattress used in this crib be a snug t and not exceed 38mm in thickness.This is to
minimise the risk of a child’s limb becoming caught in the gap.

3
Due to variations in the style and design of our products, the photographs and illustrations shown in this instruction
manual are generic, therefore product fabrics, colour and design may vary from images shown. CNP Brands reserves
the right to alter product specifications without notice as a result of our ongoing policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Bebe Care Crib - White
Congratulations on your purchase of the Bebe Care Crib - White.
This product has been designed and developed with safety, comfort
and functionality in mind. Please take the time to read this manual
carefully before using this product and keep it in a safe place for
future reference.
CONGRATULATIONS

4
ASSEMBLY CONTENTS
Check what you have received...
You have received 1 box. Please check the contents of the box against the list
below. If anything is missing, please contact Customer Service.
In Australia, contact CNP Brands on 1300 667 137, in New
Zealand contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Bottom Shelf Rail
Foot End
x 2
x 1
x 1
x 1
x 1
x 2Mattress Board
Bottom Shelf
Headboard
Upper (thick) Top
Side Rail
No accessories recommended for use with 096328M-003 Bebe Care Crib - White.

5
ASSEMBLY CONTENTS
Assembly Kit:
Lower (thin) Top
Side Rail
Short Rail
Crib Mesh
x 2
x 2
x 1
x 14
x 2
x 4
x 1
x 2
x 1
x 1
Bolts (35mm)
Towel Rail Moulds
Castors
Towel Rail
Long Rail
Mattress Pad (with
fitted sheet)
Allen Key
x 10Dowels

6
ASSEMBLY / OPERATING INSTRUCTIONS
To attach Bottom Shelf...
To attach upper (thick) Top Side Rail...
1
1
Attach the bottom shelf rails onto the headboard
with one dowel and one bolt per rail.
Slide bottom shelf along the grooves of the bottom
shelf rails and into position.
Attach both upper (thick side rails onto the
headboard by aligning them with the upper holes
in the headboard. Insert one dowel per rail.
Ensure that the label “A” & “B” on the top side
rail is matched to the label “A” & “B” on the
headboard.
Insert two bolts, ensure that they are secured but not
tight.
It is advisable that two people assemble the crib in the room in which it is to be
used.
As small parts are involved in assembly, children should be kept clear of the
assembly area.
Dispose of all packaging material immediately after the cot is assembled.
Identify all parts and components.
Clear an area on the floor for assembly and place a sheet on the floor to ensure
the crib is not scratched during assembly.
1a.
1b.
1a.
1b.
1c.
a.
b.
c.
d.
e.
DO NOT OVERTIGHTEN BOLTS.OVERTIGHTENING BOLTS CAN CAUSE PANELSTO CRACK.
WARNING

7
ASSEMBLY / OPERATING INSTRUCTIONS
To attach lower (thin) Top Side Rail...
To attach Foot End and Castors...
To insert the Crib Mesh...
1
1
1
2
Attach both lower (thin) top side rails onto the
headboard by aligning them with the lower holes in
the headboard directly under the upper (thick) top
side rail. Insert one dowel per rail.
Ensure that the label “A” & “B” on the top side
rail is matched to the label “A” & “B” on the
headboard.
Insert two bolts, ensure that they are secured but not
tight.
Attach the foot end by aligning it with the top
side rails and bottom shelf grooves.
Insert and secure the remaining six bolts into
the foot end.
Tighten all bolts on crib changer.
Insert all four castors into the legs of the
headboard and foot end, press firmly to
ensure they are secure.
Insert the crib mesh into the assembled crib frame.
Ensure the long side of the crib mesh corresponds
with the long sides of the crib frame.
Pull one lone side of the crib mesh through the
gaps between the upper (thick) top side rail and the
lower (thin) top side rail.
Slide a long rail through the seam as shown in the
image.
Repeat previous steps for the long seam and two
short seams.
1a.
1b.
1c.
1a.
1b.
1c.
1d.
1a.
1b.
1c.
2a.
2b.
PLEASE NOTE! Ensure that the triangle point of all rails corresponds with the
shape of the gaps between the top side rails.

8
ASSEMBLY / OPERATING INSTRUCTIONS
To insert Mattress Board and Mattress Pad...
To attach Towel Rail...
1
1
2
2
Place the mattress board into the crib.
Insert the ends of the towel rail into the slots in the
towel rail moulds.
Press firmly to ensure they are secure.
Press down firmly to ensure the mattress board is
fully inserted.
Insert mattress pad on top of the mattress board
with the fabric surface facing upwards.
Align the assembled towel rail with the two
remaining holes on the outer side of the foot
end.
Insert one bolt and one dowel into both inside
edges of the foot end to secure the towel rail.
Tighten bolt with allen key.
1a.
1a.
1b.
2a.
2b.
2a.
2b.
2c.

9
HOW TO CARE FOR YOUR BEBE CARE CRIB
Cleaning
Maintenance
This product has been designed and developed with safety, comfort and
functionality in mind. Please take the time to read this manual carefully before
using this product and keep it in a safe place for future reference.
To ensure the long-lasting use of your cot, wipe down with a damp cloth and
use a mild soap solution if necessary. Do not use abrasive cleaners. Always
store product in a clean dry place.
Always check parts regularly for tightness of screws, nuts and other fasteners
– tighten or replace if required. To maintain the safety of your crib, seek
prompt repairs for bent, torn, worn or broken parts. Use only those parts and
accessories approved by CNP Brands.
If you have any difficulties in assembling the crib, please contact our Service
Department.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact
Wainhouse Distribution on 0800 567 5000.

Distributed in Australia by CNP Brands
20 Calarco Drive,
Derrimut,VIC, 3026
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: [e-mail]
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by Wainhouse
Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes,Auckland, New Zealand
Customer Service: 0800 567 5000
E: [e-mail]