Bebe Care Porta Casa 3 Tier 092237 User manual

IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
PORTA CASA 3 TIER CHANGE TABLE MODEL # 092237

Read all instructions before assembly and use of the change table. Keep instructions
for future use.
ADULT ASSEMBLY REQUIRED:
DUETO THE PRESENCE OF SMALL PARTS DURING ASSEMBLY,KEEP OUT OF REACH OF
CHILDREN UNTIL ASSEMBLY IS COMPLETE.
DO NOT LEAVETHE CHILD UNATTENDED ONTHE CHANGETABLE.
TO PREVENT FALLS,DO NOT USE CHANGE PAD WITH ATHICKNESS OF MORETHAN 30MM.
WHEN LOCKABLE CASTORS/WHEELS ARE FITTED,THEY SHOULD BE LOCKED
WHENTHE CHANGETABLE IS IN USE.
FOLLOWTHE MANUFACTURER’S ASSEMBLY INSTRUCTIONSTO ENSURE THE SAFETY
FEATURES OFTHE CHANGETABLE ARE NOT COMPROMISED.
SAFETY PRECAUTIONS
WARNING
All assembly ttings should always be tightened properly and checked regularly.
To prevent falls,do not leave your baby unattended on the change table.
Both brakes on the castors must be applied before placing your baby on the change table.
DISCONTINUE use once child reaches 12 months of age or 11kgs.
DO NOT allow older children to climb or play on the change table.
DO NOT use accessories other than those supplied and approved by CNP Brands.
Promptly replace worn out or broken parts.
DO NOT over tighten the bolts.
Be aware of the risk of open res and other sources of strong heat, such as electric bar res,gas res etc.in
close vicinity to the change table.
DO NOT use this change table if any part is broken, torn or missing.
ENSURE children are clear of any moving parts when adjusting the change table.
For warranty purposes,keep your sales receipt to provide proof of purchase.
RECOMMENDED CHANGE PAD (SOLD SEPARATELY):
THIS CHANGE TABLE HAS BEEN MANUFACTURED FOR USE WITH A CHANGE PAD WHICH MEASURES 750MM
LONG X 500MM WIDE X 30MM INTHICKNESS.
We recommend the Childcare Universal Change Pad model #115140BC-003 for use with this change table.
Place change pad on top of the change table ready for use.

Due to variations in the style and design of our products, the photographs and illustrations shown in this instruction
manual are generic, therefore product fabrics, colour and design may vary from images shown. CNP Brands reserves
the right to alter product specifications without notice as a result of our ongoing policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Porta Casa 3 Tier Change Table
CongratulationsonyourpurchaseofthePortaCasa3TierChange
Table.
This product has been designed and developed with safety, comfort
and functionality in mind. Please take the time to read this manual
carefully before using this product and keep it in a safe place for
future reference.
CONGRATULATIONS

ASSEMBLY CONTENTS
Check what you have received...
You have received 1 box. Please check the contents of the box against the list
below. If anything is missing, please contact Customer Service.
In Australia, contact CNP Brands on 1300 667 137, in New
Zealand contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
End Panel
Top Shelf
x 2
x 1
x 1
x 1
x 2
x 2
x12
x 8
x 1
Bottom Shelf
(Including Feet
Mounting)
Middle Shelf
Top Side Rail
Leg
58mm Bolt
25mm Bolt
Allen Key
Recommended use with 115140BC-003 Universal Change Pad - White.

ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Change Table...
1
2
3
Lay one end panel on its side and place the
bottom shelf in position.
The bottom shelf is the thickest and has the
mounting holes to attach the feet.
Ensure the shelf correctly fits into the groove on
the headboard.
Secure with two x 58mm bolts.
Repeat for middle shelf.
Attach the two top rails to the headboard with two x
58mm bolts ensuring the grooves are facing inwards
and towards the bottom.
As small parts are involved in assembly, children should be kept clear of the
assembly area.
Dispose of all packaging material immediately after the change table is
assembled.
Identify all parts and components.
Clear an area on the floor for assembly and place a sheet on the floor to ensure
the change table is not scratched during assembly.
1a.
1b.
1c.
1d.
2a.
3a.
a.
b.
c.
d.
DO NOT OVERTIGHTEN BOLTS.OVERTIGHTENING BOLTS CAN CAUSE PANELSTO CRACK.
WARNING

ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Change Table continued...
To attach Feet...
4
1
2
5
Carefully lay the change table down with the
shelves standing up.
Insert the top shelf by sliding it in the grooves
on the top rails and into the groove in the
headboard.
Lay change table carefully on its side.
Locate the mounting holes on the inside of the
bottom shelf.
Fix into place with two x 25mm bolts on each
mounting.
The feet should be facing away from each other
towards the front and rear of the change table.
Ensure bolts are firm.
Carefully stand the unit upright.
Place the remaining headboard onto the shelves
making sure each shelf sits in the headboard
groove.
When the headboard is in position, secure with
the remaining six x 58mm bolts.
4a.
4b.
1a.
1b.
1c.
2a.
2b.
2c.
5a.
5b.
The change table is now ready for use.

HOW TO CARE FOR YOUR BEBE CARE CHANGE TABLE
Cleaning
Maintenance
This product has been designed and developed with safety, comfort and
functionality in mind. Please take the time to read this manual carefully before
using this product and keep it in a safe place for future reference.
To ensure the long-lasting use of your change table, wipe down with a damp
cloth and use a mild soap solution if necessary. Do not use abrasive cleaners.
Always store product in a clean dry place.
Always check parts regularly for tightness of screws, nuts and other fasteners
– tighten or replace if required. To maintain the safety of your change table,
seek prompt repairs for bent, torn, worn or broken parts. Use only those parts
and accessories approved by CNP Brands.
If you have any difficulties in assembling the change table, please contact
our Service Department.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact
Wainhouse Distribution on 0800 567 5000.

Distributed in Australia by CNP Brands
20 Calarco Drive,
Derrimut,VIC, 3030
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: [e-mail]
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by Wainhouse
Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes,Auckland, New Zealand
Customer Service: 0800 567 5000
E: [e-mail]