9
Connecting Your Phone
1. Connect the doorbell using provided DC adapter, (red wire to ‘ + ’, black wire to ‘ - ’) then fully insert
into the rain cover. Indicator will blink from red to blue after initial boot is complete, indicating that the
device is in standby mode.
2. Place device into pairing status by using a paperclip or small pin to click the “Reset” button (located
underneath the battery cover) for 5 seconds. Indicator light will blink quickly from blue to red if done
correctly.
3. To pair with Android/iOS, open the application “idoorphone”, click “Add Device” and follow the on-
screen directions that appear. Pairing status will last for 90 seconds on the door station, if pairing
fails, doorbell tips “pairing failure”.
4. Once the device is connected to
the app, Go to > Settings > WLAN >
Scan. Select a network to connect
the doorbell to, and enter the
network password. Click
“Done”. Doorbell indicator will
sound and light blue if connect-
ed correctly. After this point,
the doorbell’s access point will
be hidden.
5. To connect another phone, con-
nect to the same Wi-Fi network
as the doorbell, and click Add
Device in the app.
*iOS devices and some Android devices will not auto connect to
the doorbell’s LAN, in which case you must manually link your
phone to the
doorbell’s
Wi-Fi hotspot.
Wi-Fi Video Intercom (B-WSP2)
