V2.00
ATTACHING TO A MX-1000 M2M ROUTER
3
Attach and fasten the BEC USB Connector to the
MX-100U and MX-1000 router using (2) small screws
(4.5mm) included in the box of the USB Connector.
KIT CONTAINS: Bracket plate, USB connector with 4 screws, 6 Washers, 7 Machine Screws, and 4 Round-Head Screws
The kit is designed to securely attach the MX-100U on top of the MX-1000 to offer additional WAN/Cellular Connectivity.
No additional drivers required. Simply attach and ready to go.
Remove the screws from the back of the MX-100U.
2
1
3
Attach and fasten the Bracket (known as bracket plate)
on top of the MX-100U using two (2) round-head screws
included in the kit.
I
WAN1
MAIN
USB1 USB2
1 2 3 4
WAN2
AUX
WAN1
AUX
GPS WAN2
MAIN
POWER
POWER INTERNET
Gb ETH
GPS WAN1 WAN2
1
WAN1
MAIN
USB1 USB2
1 2 3 4
WAN2
AUX
WAN1
AUX
GPS WAN2
MAIN
POWER
POWER INTERNET
Gb ETH
GPS WAN1 WAN2
2
II
MX-1000 (Standard Version)
Attach and fasten the Bracket, from ,on top of the
MX-1000 M2M Router, no IP50, using (4) washers and
(4) machine screws (M4*L8mm) included in the kit.
I
1. MX-100U 2. Bracket Plate 3. Round-head Screws*2
III
II
WAN1
MAIN
USB1 USB2
1 2 3 4
WAN2
AUX
WAN1
AUX
GPS WAN2
MAIN
POWER
POWER INTERNET
Gb ETH
GPS WAN 1 WAN2
1
WAN1
MAIN
USB1 USB2
1 2 3 4
WAN2
AUX
WAN1
AUX
GPS WAN2
MAIN
POWER
POWER INTERNET
Gb ETH
GPS WAN1 WAN2
2
3
MX-1000 (No IP50)
MX-1000 (W/ IP50 Sleeve)
1. MX-100U w/ Bracket Plate 2. Washers * 4
3. Machine Screws * 4
MX-1000 (with IP50)
Attach and fasten the Bracket, from ,on top of the
MX-1000 M2M Router, with IP50, using (4) machine
screws (M4*L8mm) included in the kit.
1. MX-100U w/ Bracket Plate 2. Machine Screws * 4
III
WAN1
MAIN
USB1 USB2
1 2 3 4
WAN2
AUX
WAN1
AUX
GPS WAN2
MAIN
POWER
POWER INTERNET
Gb ETH
GPS WAN1 WAN2
IV
1. BEC USB Connector 2. Screws*2
2
1
WAN1
MAIN
USB1 USB2
1 2 3 4
WAN2
AUX
WAN1
AUX
GPS WAN2
MAIN
POWER
POWER INTERNET
Gb ETH
GPS WAN1 WAN2
II
