Becker CASCADE PRO User manual

GB
DK
S
Operation Guide
Betjeningsvejledning
Bruksanvisning

2
Contents
Safety instructions 8
Information regarding
general road safety 9
Overview of controls 10
General operation 11
Menu basics 11
Fast access function 11
Main menu 11
Status display 12
Options menu 12
How to use the menus 12
Data entry menus 13
Anti-theft device 14
Entering unit code numbers 14
What to do if an incorrect code
number has been entered 14
Removing/Inserting the
control panel 15
Removal 15
Insertion 16
Inserting/Removing the cover 16
Inserting the cover 16
Removing the cover 16
Switching the unit on/off 17
Switching on 17
Switching off 17
Setting the volume 18
Sound settings 18
Calling up the sound settings 18
Setting the equalizer 19
Defining the equalizer setting 19
Setting balance and fader 20
Balance setting 20
Fader setting 20
Switching Loudness on/off and
adjusting 20
Becker Surround 21
Subwoofer 21
Crossover 21
Compression 22
Reset settings 22
Mute 22
Navigation mode 24
What is navigation? 24
Navigation data 24
Inserting memory card 25
Removing memory card 26
Selecting navigation 26
Calling up the Navigation
main menu 27
Entering a destination 28
Selecting a country 28
Entering a destination town 29
Selecting destination via postcode 30
Entering the destination road 31
Entering the destination town centre 32
Entering house number for
destination road 32
Selecting junction for destination road 33
Entering destination
via geo-coordinates 33
Setting the route options 34
Saving/Deleting route options 35
Saving a destination 36
Navigation fast access 36
Navigating from fast access 36
Navigation to POI in local area 37
Protecting an entry 37
Deleting an entry 37
Deleting a list 38
Saving an entry in the address book 38
Creating a new entry 38
Adding data to entries 39
Selecting a destination from the
address book 40
Point of interest 40
Local 41
In country 42
Local area of destination 43
In place 43
Information about points of interest 44
External points of interest 45
Beckerclub 46
Loading/updating @-destinations 46
Navigating to @-destination 47
Functions in the @-destination list 47
During route guidance 47
Navigation status screen 48
Example navigation displays 48
Traffic lane recommendations 50

3
Contents
Options menu 50
Cancelling route guidance 51
Traffic announcements 52
Route list 52
Stopover 52
Blocking a route 54
Modifying route options 54
Switching navigation
announcements on/off 55
Information during route guidance 55
Displaying destination information 55
Displaying/Storing position 56
Displaying traffic announcements 56
Displaying/Changing route settings 57
Information during non-active
route guidance 57
Displaying/Storing a position 57
Displaying TMC messages 57
Dynamic route guidance
with TMC 57
What is dynamic route guidance? 57
Dynamic route guidance 58
Displaying traffic information 59
Settings 60
Traffic announcements 60
Announcing the time of arrival 61
Displaying speed limits 61
ETA setting 62
Measuring unit 63
Radio mode 64
Switching on radio mode 64
Calling up the Radio main menu 64
Selecting a waveband 65
FM mode 66
Possible settings for FM stations 66
Station list 66
Scan function 67
Manual station tuning 68
Filter function 68
Switching the filter function on/off 68
Filtering stations 69
Filtering stations 69
Cancel filtering 69
Programme type 70
Switching the programme
type function on/off 70
Selecting the programme type 70
Regionalisation 71
Radio text 71
Voice entries 72
Reception optimisation 72
Bandwidth control 73
Traffic programme 73
Switching a traffic programme on/off 74
Selecting a TP station 74
Automatic 74
Manual TP station selection 74
TP volume 75
Cancelling traffic announcements 75
AM mode 75
Possible settings for AM stations 75
Scan search 76
Scan function 76
Station memory 77
Calling up the station memory 77
Storing stations 77
Different waveband set 77
Station already in memory 78
Moving stations 78
Deleting stations 79
Naming stations 79
Creating/Deleting voice entries 80
Create 80
Deleting 80
Reading out voice entries 80
Media mode 81
Activating media mode 81
Media fast access functions 81
Media status display 82
Track jump/Track skip 83
Fast forward/rewind 83
Play mode 83
Calling up the Play Mode menu 83
Track mix (random play function) 84
Scan 84
Repeat track 85
CD mix 85
Repeat CD 85
Directory mix 85
Repeating a directory 86

4
Contents
Calling up the Media main menu 86
Switching detailed track display
on/off 86
CD mode 87
Notes on compact discs (CD) 87
Inserting/Ejecting CDs 87
Notes on CD-R and CD-RWs 88
Notes on copy-protected CDs 88
Temperature protection circuit 88
MP3 mode 88
General notes on MP3 88
Creating an MP3 storage medium 89
MP3 CD mode 90
MP3 memory cards/
Micro-drive mode 90
Inserting a micro-drive/
CF memory card 90
Removing a micro-drive/
CF memory card 91
Inserting SD/MMC memory card 91
91
Removing SD/MMC memory card 92
Playback sequence for MP3
storage media 92
Playlists 93
Creating playlists 93
Audio playback via an
optional Apple™ iPod 94
CD changer mode 94
Operational readiness of CD changer 94
Loading/Ejecting the CD magazine 95
External units/AUX mode 95
Telephone mode 96
Inserting the SIM card 97
Entering PIN 98
Calling up the telephone 98
Calling up the Telephone
main menu 99
Dialling number 100
Number is busy 100
Dialling a number from the
address book 101
Call lists 102
Calling a number from the list 103
Retrieving information about
the entry 103
Deleting a call list 103
Emergency call 103
Settings 104
Call divert 105
Call settings 107
Selecting a network 109
Ring tone 110
PIN Settings 110
Automatic call answering 111
Dialogue with call 111
Switching the telephone off 112
Telephone calls 112
Status display 112
Accepting/ rejecting a call 113
Accepting a call 113
Rejecting a call 113
Ending a call 114
Holding 114
Toggling 115
Conference call 115
Creating a conference 115
Adding parties 116
Private call 116
Ending call with individual parties 117
Ending a conference call 117
Options menu 117
Ending call 118
Ending all calls 118
Holding 118
Activating 118
Dialling 118
Conference 119
Disconnecting 119
Sound sel. 119
Private 120
Telephone fast access functions 120
Direct calling 121
Protecting an entry 121
Deleting an entry 121
Deleting a list 122
Saving a number in the address book 122
Creating a new entry 122
Adding data to entries 123
Saving number to SIM card 124

5
Contents
Mail messages 125
New incoming SMS display 125
Calling up SMS fast access
function 126
Reading SMS 126
Options for SMS read aloud 127
Replying 127
Returning call 127
Deleting 127
Storing number in address book 127
Saving number to SIM card 128
Editing 128
Deleting all SMS 128
Opening SMS main menu 128
Composing SMS 129
Saved SMS 131
Sending 132
Deleting 132
Editing 132
Deleting all SMS 132
Sent SMS 133
Displaying free memory space 133
Mail settings 134
Opening Mail settings 134
Announcing new SMS 134
SMS centre number 135
Internet (WAP) function 136
Establishing a WAP connection 136
Operation in WAP pages 137
Text input 138
Terminating WAP connection 138
Favourites 138
Pages visited 139
Entering URL for WAP page 139
Terminating WAP connection 140
Opening WAP fast access
function 140
Opening WAP address directly 141
Saving entry to the Favourites 141
Saving an entry in the address book 142
Protecting an entry 143
Deleting an entry 143
Deleting a list 143
Changing Beckerclub address 144
WAP main menu 144
Opening WAP main menu 144
Favourites 145
Opening list of favourites 145
Loading favourites 145
Editing favourites 146
Entering a URL 147
Access profiles 147
Loading access profile 147
Creating access profile 148
Changing/deleting an access profile 151
Settings 151
URL beginning 152
URL ending 152
BeckerClub 152
Accessing the BeckerClub on
the Cascade 153
Address book 154
Calling up the address book 154
Calling up the Address Book
main menu 154
Creating an entry 155
Creating an entry which supports
navigation 156
Find entry 158
Setting the search criterion 159
Editing entries 159
Modifying an entry 160
Deleting an entry 161
Creating/Deleting voice entries 161
Create 161
Delete 161
Reading out voice entries 161
Exporting address book/data 162
Exporting entry 163
Importing an address book entry 163
Saving address book entry to
SIM card 165
Importing SIM card entries 165
Deleting address book/data
entirely 166

6
Contents
Navigating to an address
book entry 166
Calling an address book
entry/sending SMS 166
Voice entries 167
Fast access functions 168
Protecting an entry 168
Deleting an entry 168
Deleting a list 169
Settings 170
Calling up general settings 170
Bluetooth 170
Opening the device list 171
Always allow connection 172
Name device 172
Deleting a device from the list 172
Deleting all devices from the list 173
Connecting and disconnecting
devices 173
Connecting devices (Cascade) 173
Connecting a device
(external device) 175
Disconnecting devices 177
Calling up Bluetooth settings 178
Activating/ deactivating Bluetooth 178
Searching for Bluetooth devices 179
Making devices visible to others 179
Device name 180
Voice mode 180
Calling up voice mode settings 180
Setting the system language 181
Displaying voice settings 181
Volume for voice output 182
Automatic dialogue 182
Voice entries 183
Voice output 183
Extended PTT 184
Repeating a voice announcement 184
System settings 184
Calling up the system settings 185
Audio 186
GAL (speed dependent volume) 186
Setting microphone sensitivity 186
Settings for left-hand/
right-hand drive vehicles 186
Volume for acoustic signals 187
Displaying the volume 187
Digital level 187
Supporting the parking aid 188
Display 188
Display brightness 188
Display colour 188
Day/ night design 189
External device 189
Reset function 190
Data backup 190
Backing up data 191
Loading data 191
Direction of rotation of the
rotary control/push button 192
Clock 192
Software update 193
Voice mode 194
What is voice mode? 194
Symbols 194
General information about the
voice control system 195
Activating the voice control system 195
Ending voice dialogue prematurely 196
Voice entries 196
Settings 197
Examples for a voice dialogue 197
Example operation in radio mode 198
Example for entering a
navigation destination 199
Example for entering a telephone
number 201
General commands 201
Help function (online help) 202
Aborting voice dialogue 202
Navigation in lists 202
Calling up the status display 202
Commands for status displays,
fast access functions and main
menus 203
Commands for radio mode 204
Commands for the radio status
display 204

7
Contents
Commands for radio fast access
mode 206
Commands in the Edit Station
menu 207
Commands for the Radio main
menu 208
Commands in the Waveband menu 209
Commands in the Programme
Type menu 210
Commands in the Filter menu 210
Commands in the TP menu 211
Commands in the Voice
Entries menu 211
Commands in the Reception
Optimisation menu 212
Commands for media mode 212
Commands for the media status
display 213
Commands for media fast access 215
Commands for the Media main menu 216
Commands for the media
Play Mode menu 217
Navigation commands 218
Correction option for incorrect
destination entry 218
Commands for the navigation
status display 218
Commands for navigation fast
access 219
Commands in the Fast Access/
Edit Destinations menu 221
Commands for the Navigation main
menu 221
Commands for the Destination menu 222
Commands for the POI menu 223
Commands for the Route
Options menu 223
Commands for the Stopover menu 224
Prompt: Is the new destination a
main destination or a stopover? 225
Commands for telephone,
mail and WAP mode 225
Commands for the PIN input menu 225
Commands for telephone fast
access mode 226
Commands in the Fast Access/
Edit Telephone Numbers menu 227
Commands for the Telephone
main menu 228
Commands in the input menu for
telephone numbers 228
Commands in the Call Lists menu 229
Commands in the call lists 229
Commands in the Telephone
Settings menu 230
Commands for the Mail main menu 231
Commands for a dialogue in the
event of an incoming call 232
Commands for a dialogue for an
incoming SMS 232
Commands for the address book 232
Commands for address book fast
access 232
Commands in the Fast Access/
Edit Entries menu 235
Commands in the Edit menu 235
Commands in the Edit Data menu 235
Commands in the menu for selecting
a Bluetooth device for export 235
Commands when an entry is open 236
Commands for the
Address Book main menu 237
Commands in the Voice
Entries menu 238
Commands in the Search
Criterion menu 238
Technical terminology 239
Technical data 252
NOTICE 253
Correct disposal of this product
(waste for electrical and electronic
equipment) 254

8
Safety instructions
Operation of the unit is permitted only if traffic conditions are suitable and you are absolutely sure that you, your
passengers or other motorists are not endangered, obstructed or inconvenienced.
In all cases, all applicable road traffic regulations must be obeyed. Destinations may only be entered when the vehicle is
stationary.
The country-specific regulations apply for telephone operations.
The navigation system is only an aid. Errors may occur in individual data items/entries. At all times, the driver must
decide whether or not to heed the information provided. We do not accept liability for erroneous data provided by the
navigation system.
Due to continual changes in traffic routing or deviations in the data, it may occur that imprecise or erroneous information
is given. Therefore, actual road signs and traffic regulations must always be observed. In particular, the navigation system
cannot be used as an orientation aid at times of poor visibility.
The unit may only be used for its intended purpose. The volume of the radio, navigation system and telephone should be
adjusted so that external noise is still audible.
Do not activate the telephone near petrol stations, fuel depots, chemical plants or blasting areas.
In the case of a malfunction (i.e. smoke or other noticeable odours) the unit is to be turned off immediately.
For safety reasons, the unit must only be opened by a trained technician. Please refer to your dealer for repair.
G

9
Information regarding general road safety
This car radio device is intended and approved for installation and operation in passenger cars, commercial vehicles and
buses (vehicle classes M, N and O) whose electric system has a rated voltage of 12V.
Installation and maintenance should only be carried out by specialists. Faulty installation or maintenance can result in
the malfunctioning of the motor vehicle’s electronic systems. The vehicle manufacturer’s safety instructions must be
observed.
The vehicle’s electronics (e.g. speedometer signal) must only be worked on by an authorised service garage. We assume
no liability for any impairment of the vehicle’s electronics.
This device is only intended for installation in the area provided for this purpose by the vehicle manufacturer.
The method of attachment used must ensure that the device will remain properly attached, should the vehicle be involved
in a crash.
The power supply must be properly fused.
Using mobile phones without an external antenna in the proximity of the radio unit may cause interference.
Familiarise yourself with the device and how it works before embarking on your journey. Whilst on the move, only operate
the device in appropriate traffic conditions. The volume of the device should be set at a level that enables external noises
(e.g. police sirens) to be easily heard.

10
Overview of controls
246 7
5
1
15 10
12
3
13
14 11
8 9
Overview of controls
1 Information button
2 On / off switch
3 Select radio
4 Select CD/CDC/memory card
5 Select navigation
6 Select telephone
7 Select address book
8 CD eject button
9 Status button
10 Right-hand rotary control/push button
Press = Confirm
Turn = Scroll through lists and menus
11 Back button
12 Release slide for removable control panel
13 Display
14 Arrow keys and
Change radio station and audio track
15 Left-hand rotary control/push button
Press = Activate voice dialogue
Turn = Set volume

11
General operation
General operation
Menu basics
Fast access function
The fast access function provides fast
access to the major functions in the
various operating modes. In most cases,
you may then make selections from lists
(radio stations, navigation destinations,
etc.). Select the first entry in the list to go
to the Operating Mode main menu.
The fast access function for the radio is
shown here by way of example.
Press the various operating elements to
access:
• The radio fast access function
• The media fast access function
(CD, CD changer and memory card)
• The navigation fast access
function
•
the telephone fast access func-
tion (if Bluetooth is activated and
a telephone is connected or SIM-Access
or the internal phone is switched on).
• The address book fast access
function
Main menu
The main menu for each operating mode
provides access to the various functions
and possible settings for that mode.
The Radio main menu is shown here by
way of example.
The main menu for the various operating
modes can be called up in two different
ways:
• Activate the fast access function (press
, , , or
).
!Turn the rotary control/push button
to select the first entry in the fast access
list.
!Press the rotary control/push button
.
or
!Press the button for which you have
called up the fast access function again
( , , , or
).
Note:
If an entry in the list is abbreviated
because it is too long (three dots appear
at the end of the text), you can display
the entry in full briefly by pressing and
holding down the button.
Note:
If no selections are made for a short
period of time when the fast access
function is displayed, the display will
automatically switch to the status dis-
play for the active operating mode.
1001
1002

12
General operation
Status display
All the information you need about the
current operating mode appears on the
status screen.
If navigation is also active in addition to
the current radio or media operating
mode, a combined display may appear.
The radio status display is shown here
by way of example.
The radio status display with active nav-
igation route guidance is shown here.
The status display can always be accessed
by pressing .
If route guidance is active, you can
toggle between the combined display
and the status display by pressing
repeatedly.
Options menu
You can call up the Options menu in the
status display.
!Press the rotary control/push button
.
The Options menu appears.
You can access the major functions for
the active operating mode directly in the
Options menu. Some of the possible
settings and functions in the Options
menu can also be set/activated via the
main menu.
The Options menu for the radio function
is shown here by way of example.
How to use the menus
The commands are the same for all
menus.
The Options menu for the radio function
is shown here by way of example.
Turn the rotary control/push button
to scroll through the menus.
Once you have made an entry in a menu,
the next menu will appear or you can
select the entry (by turning the rotary
control/push button ) to activate/
deactivate a function.
Note:
The address book does not have a status
display.
1003
1004
1005
1005

13
General operation
If the menu entry is concealing another
menu, a small triangle will appear after
the menu entry.
or in front of a menu entry indi-
cates that a function can be activated or
deactivated. The symbol stands for
off and the symbol for on.
Data entry menus
If data can be entered, special data entry
menus appear.
The data entry menu for the surname in
an address book entry appears in the
example.
!Turn the rotary control/push button
and then press the rotary control/push
button to select each letter one after the
other.
You can change the character set for the
available characters by selecting various
symbols.
• Switch to lowercase
• Switch to uppercase
• Switch to numbers
• Switch to special characters
• Switch to lowercase international
• Switch to uppercase international
Accept entry:
!In the data entry menu, select the
symbol.
or
!Press the rotary control/push button
and hold it down for at least 2 seconds.
Note:
You can always press to go back
one step in the menu hierarchy.
Note:
Select the symbol to delete the last
character in the entry.
If, when selecting the symbol , the
rotary control/push button is
pressed for longer than 2 seconds, the
complete entry is deleted.
6003
Note:
After the first character has been entered,
the Cascade automatically switches to the
input of lower case letters.

14
General operation
Anti-theft device
Your Cascade features two anti-theft
devices:
• Protection by means of a five-digit
unit code number
• Protection by means of a removable
control panel
Entering unit code numbers
If the Cascade is disconnected from the
electrical supply source, the anti-theft
device prevents it against unauthorised
use once it has been reconnected.
You need the five-digit code number
printed on the CODE CARD to start up
the Cascade.
Shortly after the unit has been switched
on by pressing , the data entry
menu for the code number will appear.
!Turn the rotary control/push button
to select the first digit of the code
number.
!Press the rotary control/push button
.
!Enter the remaining digits of the code
number in the same way.
Once you have entered all 5 digits of the
code number correctly, the Cascade will
come on automatically and you can use
all functions.
What to do if an incorrect code number
has been entered
The following message appears if an
incorrect code number is entered.
!Press the rotary control/push button
.
The data entry menu for the code number
appears again.
!Enter the correct code number as
described above.
Note:
It is important to store the CODE
CARD in a safe place outside of the
vehicle. This will prevent unauthorised
use. The window stickers provided can
be attached to the windscreen/windows
inside your vehicle.
Note:
If you enter an incorrect number:
!Press the back button to delete
the last number entered.
or
!Select the symbol.
1006 1007

15
General operation
Removing/Inserting the
control panel
Part of the control panel can be removed
to provide additional effective protection
against theft.
The Cascade cannot be switched on
without this removable control panel.
Removal
!Push the release slide for the control
panel (A) to the right.
The control panel is released.
!Remove the control panel from the
mount.
If the Cascade is still switched on when
the control panel is removed, it is
switched to mute and disabled.
If the control panel is reinserted within
90 seconds, the Cascade will automati-
cally switch itself back on.
Note:
Entering an incorrect code number three
times will disable the unit for approx.
1hour.
The time remaining until another
attempt can be made to enter the code
number is displayed.
!Leave the ignition switched on.
Switching the ignition off resets the
waiting time of one hour to zero.
Once the waiting time has elapsed, the
data entry menu for the code number
appears again.
1008
A
Notes:
• Please insert the control panel into the
accompanying protective cover after
removal.
Do not touch the metal contacts on the
control panel or on the Cascade.
• If you move your vehicle once the
control panel has been removed, once
you insert the control panel, it will
take some time for the navigation
system to ascertain your position.
1009

16
General operation
Insertion
!Take the control panel out of its pro-
tective cover.
!Insert the left-hand side of the control
panel.
!Push the control panel into place.
The Cascade is now ready for operation
and can be switched on, or it will switch
itself on automatically.
Inserting/Removing the cover
The scope of supply of the Cascade
includes a red plastic insert. This plastic
insert can be snapped into the gap which
appears once the control panel has been
removed.
As well as serving as a protective cover
for any CF card/micro-drive, the red col-
our of the plastic insert clearly indicates
that the control panel has been removed.
Inserting the cover
!Remove the control panel as described
in “Removing/Inserting the control
panel” on page 15.
!Insert the plastic insert into the gap
with the hole at the top and the smooth
side facing outwards.
!Push the lower section of the plastic
insert into the gap until it snaps into
place.
The cover has now been inserted.
!Reinsert the control panel as described
in “Removing/Inserting the control
panel” on page 15.
Removing the cover
!Remove the control panel as described
in “Removing/Inserting the control
panel” on page 15.
!Insert your finger into the hole in the
plastic insert.
!Carefully push the plastic insert down-
wards.
!Pull the plastic insert forwards.
The cover has now been removed.
!Reinsert the control panel as described
in “Removing/Inserting the control
panel” on page 15.

17
General operation
Switching the unit on/off
Switching on
!Press .
or
!If the Cascade was switched off via
the ignition, the Cascade will switch
back on once the ignition has been
switched on.
!Confirm the warning which appears
by pressing the rotary control/push
button .
Switching off
!Press .
If the ignition is switched on, the Cas-
cade is switched to standby mode. The
display goes dark and the Cascade sound
is switched off.
or
!Switch off the vehicle ignition.
The shutdown display appears for
approx. 5 seconds.
During this period of approx. 5 seconds,
shutdown can be aborted by pressing
one of the buttons on the Cascade or by
switching the ignition back on.
The Cascade then switches itself back on
and plays back the last source selected
(radio or media).
1010
Notes:
• Unless the warning message is con-
firmed, the Cascade will remain disa-
bled.
• Once it has been switched on, the
Cascade will play back the last source
selected (radio or media). Any mute
or pause function activated will be
cancelled.
• If fewer than approx. 2 hours have
elapsed since the unit was last
switched off, active route guidance
will be restarted.
• If the volume was set to a very loud
value before the unit was last switched
off, it will be reset to setting 26 when
the unit is switched back on.
1010

18
General operation
Setting the volume
There are 50 volume settings. The vol-
ume setting applies to all radio and audio
sources.
You can specify whether changes in vol-
ume should be displayed in graphics for-
mat or not in “Displaying the volume”
on page 187.
!Turn the rotary control/push button
clockwise/counter clockwise.
!The volume increases or decreases.
Sound settings
You can configure the sound of your
Cascade to meet your requirements in
the sound settings. The settings are also
valid for all radio/audio sources.
Calling up the sound settings
!Press or until the sound
settings appear.
or
!Select Sound in the radio or Audio
main menu (Radio main menu
Page 64/Audio main menu Page 86).
!Turn the rotary control/push button
to select one of the following options:
Equaliser,
Balance / fader,
Loudness,
Becker surround,
Subwoofer,
Crossover,
Compression and
Reset settings
!Confirm your selection by pressing
the rotary control/push button .
1011
Note:
Subsequent sections of the operation
guide describe how to set the volume for:
• Traffic announcements (page Page 75)
• Navigation announcements and other
voice messages (Page 182)
• Acoustic signals (Page 187)
Note:
Press one of the buttons , ,
, or in order to quit
the sound settings.
1012

19
General operation
Setting the equalizer
You can switch the acoustic pattern on 5
frequency bands with the equalizer
setting.
4 equalizer presets are also available for
selection. An additional option also
allows you to make another 3 equalizer
settings.
or
!Select Equaliser in the sound settings.
!Next, turn the rotary control/push
button to select one of the four
equalizer presets (Rock, Pop, Jazz Music
and Classical) or one of the three user-
defined equalizer settings (User 1 - User
3or Linear).
!Turn the rotary control/push button
to apply the required equalizer setting.
Defining the equalizer setting
!Select User 1, User 2 or User 3.
!Press and hold down the rotary control/
push button .
The cursor jumps to the first frequency
band.
!Turn the rotary control/push button
to select the frequency band to be
changed.
!Confirm your selection by pressing
the rotary control/push button .
!Turn the rotary control/push button
to select the required setting for the
selected frequency band.
!Confirm the setting by pressing the
rotary control/push button .
You may now change other settings.
Once you have made the required set-
tings:
!Press and hold down the rotary control/
push button .
or
!Turn the rotary control/push button
to select the arrow next to the
frequency bands and press the rotary
control/push button .
You may now make other equalizer
settings or select one of the presets.
1013
Note:
The equalizer presets (Rock, Pop, Jazz
Music and Classical) cannot be modified.
Select Linear to set the equalizer settings
to an average value.
1014
1015

20
General operation
Setting balance and fader
You can shift the tone centre in the vehi-
cle using the balance and fader setting.
!Select Balance / fader in the sound
settings.
An image of the vehicle interior in the
direction of travel appears on the dis-
play. The small triangle indicates the
current position of the tone centre.
The Balance setting is active.
!Turn the rotary control/push button
to select Balance or Fader.
Balance setting
!Turn the rotary control/push button
clockwise/counter clockwise.
The tone centre moves to the right/left.
Fader setting
!Turn the rotary control/push button
clockwise/counter clockwise.
The tone centre moves forwards/back-
wards.
Switching Loudness on/off and
adjusting
Loudness provides a tone-compensated
increase of the low frequencies, inde-
pendently of the volume. The setting op-
tions enable you to adapt the Loudness
function to your vehicle.
!Select Loudness in the sound settings.
!Turn the rotary control/ push button
to select the required value.
1016
1016
1017
Note:
Selecting “1” sets an increase for higher
bass frequencies, “2” for medium bass
frequencies and “3” for low bass fre-
quencies.
Select off to deactivate the Loudness
function.
1018