Becker CentralControl CC51 Training manual

CentralControl
CC51
en Commissioning instructions
Central Controller
Important information for:
• Fitters / • Electricians / • Users
Please forward accordingly!
These instructions must be kept safe for future reference.
Becker-Antriebe GmbH
Friedrich-Ebert-Straße 2-4
35764 Sinn/Germany
www.becker-antriebe.com

Table of contents
Contents .............................................................................................................. 3
General ............................................................................................................... 3
Warranty .............................................................................................................. 3
Items included ..................................................................................................... 3
Safety instructions ................................................................................................ 4
Intended use ........................................................................................................ 5
Dimensions .......................................................................................................... 6
Device overview ................................................................................................... 7
Online documentation ........................................................................................... 8
Mains connection ................................................................................................. 8
Menu structure ..................................................................................................... 8
Commissioning, step-by-step .............................................................................. 10
Set the language ....................................................................................... 10
Establishing the network and Internet connections ....................................... 10
Set the date and time ................................................................................. 11
Weather location ....................................................................................... 11
Add a B-Tronic / KNX receiver .................................................................... 11
Add a Centronic receiver ............................................................................ 12
Create rooms ............................................................................................ 12
Add receivers to rooms .............................................................................. 12
Create groups ........................................................................................... 13
Add receivers to groups ............................................................................. 13
Operation ........................................................................................................... 14
Operating receivers ................................................................................... 14
Tubular drive receivers .............................................................................. 14
Dimmer receiver ........................................................................................ 15
Switch receivers ........................................................................................ 15
Operating groups ...................................................................................... 16
Extended configuration ........................................................................................ 17
Screen settings ......................................................................................... 17
Backing up and restoring ........................................................................... 17
Updating the system software .................................................................... 17
Factory default settings ............................................................................. 18
Restart ..................................................................................................... 18
Access data .............................................................................................. 18
Installation .......................................................................................................... 19
Cleaning ............................................................................................................. 19
Technical data ..................................................................................................... 20
General Declaration of Conformity ........................................................................ 21
2

Contents
General
With the CC51 you can operate the drives and control units with bidirectional KNX radio
and the Centronic I and II range of controls.
Free open source software is used in this device. The source code can be downloaded
from http://www.b-tronic.net/source/. On request, Becker Antriebe will make the
source code available on a CD-ROM at cost price. Please contact [email protected]
if you are interested in this.
Please observe these Assembly and Operating Instructions when installing and setting
the equipment.
Warranty
Structural modifications and incorrect installation which are not in accordance with
these and our other instructions can result in serious injuries, e.g., crushing of limbs.
Therefore, structural modifications may only be carried out with our prior approval and
strictly in accordance with our instructions, particularly the information contained in
these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intended use is
not permitted.
The end product manufacturer and fitter have to ensure that all the relevant current
statutory, official and, in particular, EMC regulations are adhered to during utilisation of
our products, especially with regard to end product manufacture, installation and cus‐
tomer advice.
Items included
▪CC51 control unit
▪USB WLAN stick
▪USB Flash memory stick
▪USB Centronic stick
▪USB B-Tronic/KNX stick (optional)
▪Mains adapter
▪Fastening material for wall mounting.
▪Documentation for commissioning
3

Safety instructions
Caution
▪Please keep the instruction manual safe!
▪Only use in dry rooms.
▪Keep people out of the system’s range of movement.
▪Keep children away from the control units.
▪Observe all pertinent country-specific regulations.
▪If the system is controlled by one or several transmitters, the sys‐
tem’s range of travel must always be visible during operation.
▪Keep packaging materials such as film away from children. Misuse
can create the risk of suffocation.
▪Do not put any objects that could put pressure on the LCD display
onto the control unit.
▪Do not let any object fall onto the display.
▪To avoid damage, do not touch the display with sharp objects.
▪Only clean the display with a soft, dry, lint-free cloth, and do not use
any chemical cleaning agents.
▪Do not scratch the display with fingernails or hard objects (e.g.
rings, wristwatches).
▪Wait until the controller has adjusted to ambient temperature before
connecting the control unit to the mains adapter. Condensation that
could lead to a short circuit can be caused inside the control unit by
large differences in temperature and air humidity.
▪Switch the control unit off immediately if the mains adapter and the
plug to which it is connected is burnt or damaged. If a mains adapter
is damaged, replace it with an original one. A faulty mains adapter
must not under any circumstances be repaired.
▪Switch the control unit off immediately if the housing of the control
unit is damaged, or if liquids have penetrated.
4

Intended use
The CC51 may only be used for the operation of suitable drives and control units with
bidirectional KNX radio and with the Centronic I and II range of controls. You can oper‐
ate a group, or multiple groups, of devices with this hand-held transmitter.
▪Please note that radio-controlled systems may not be used in areas with a high risk of
interference (e.g., hospitals, airports).
▪The remote control is intended solely for use with equipment and systems in which
malfunctions in the hand-held transmitter or receiver would not pose any risk to per‐
sons, animals or property, or which contain safety devices to eliminate such risks.
▪The operator is not protected from interference from other telecommunications sys‐
tems and terminal equipment (e.g., even from radio-controlled systems which are
properly operated in the same frequency range).
▪Only connect radio receivers to devices and systems approved by the manufacturer.
Note
▪Ensure that the control unit is not installed or operated close to met‐
al surfaces or magnetic fields.
▪Radio-controlled systems transmitting on the same frequency may
cause reception interference.
▪Note that the range of the radio signal is limited by legislation as
well as by design.
5

Dimensions
All dimensions in mm.
156
197 32
6

Device overview
1
2345
6
7 8 9
10
11
12
13
1. Loudspeaker
2. LAN connection
3. WLAN connection
4. Headphone output, 3.5 mm
5. Mains connection
6. Microphone
7. Operating status LED
8. Integrated front camera
9. Light sensor
10. USB connections for:
- KNX stick
-Centronic stick
-Flash memory
- Free
11. Reset button
12. Cover
13. Feet
7

Online documentation
In addition to the present commissioning instructions, we make comprehensive docu‐
mentation available to you online.
Please visit the following Internet site:
http://www.becker-antriebe.net/cc51-manual.
Mains connection
1. Pull the cover off the control unit.
2. First connect the mains adapter to the control unit, then plug it into the socket.
3. The starting screen appears.
4. Now put the cover back onto the control unit.
Menu structure
Home screen
My house
Settings and applications
8

Home screen
1
2
4
3
1. Display the current weather
2. Basic menu
3. Status indications
4. Time / date
My house
▪Rooms
▪Groups
▪Scenarios
Settings and applications
▪Cameras
▪Radio
▪Configuration
▪Installation
▪System information
9

Commissioning, step-by-step
Set the language
1. Press the button in order to open the "Settings and applications" menu.
2. Now press the " Configuration" button followed by the "Set language" button.
3. Then select the desired language.
4. Now confirm your input with .
5. Press the " " button to close the menu.
Establishing the network and Internet connections
Note
An Internet connection is necessary for some functions.
In order to be able to use these functions, make sure that the CC51 is
connected to your network, that there is an Internet connection, and
that the time and date are set correctly.
Do remember that this may result in charges, depending on the con‐
tractual conditions of your Internet supplier.
1. Press the button in order to open the "Settings and applications" menu.
2. Now press the " Configuration" button followed by the "Network settings" button.
3. If you want to make the connection to your network over a LAN cable, then select
"Ethernet". Otherwise, select "Wi-Fi", and enter the necessary access data for your
wireless network.
4. Under network configuration, select whether this should be done by means of
DHCP or manually. If configuring manually, enter the following data: IP address,
subnet mask, gateway and name server
5. Now confirm your entries with .
Making a connection via LAN
1. Pull the cover off the control unit.
2. Connect the LAN cable to the control unit.
3. The LAN symbol appears on the main display when the connection is successful.
4. Now put the cover back onto the control unit.
Caution
Lay the LAN cable in such a way that nobody can tread on it or trip over
it.
Making a connection via WLAN
1. Press the button in order to open the "Settings and applications" menu.
2. Now press the " Configuration" button followed by the "Network settings" button.
10