Rosslare AC-225-B Series Manual

AC-225x-B Series
Expandable 2-Reader Networked
Access Control Panel
Hardware Installation and User Manual
Models:
AC-225-Bx
AC-225-DIN
AC-225IP-Bx
AC-225IP-DIN

Copyright © 2020 by Rosslare. All rights reserved.
This manual and the information contained herein are proprietary to ROSSLARE
ENTERPRISES LIMITED and/or its related companies and/or subsidiaries’ (hereafter:
"ROSSLARE"). Only ROSSLARE and its customers have the right to use the information.
No part of this manual may be re-produced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, without the express written permission of
ROSSLARE.
ROSSLARE owns patents and patent applications, trademarks, copyrights, or other
intellectual property rights covering the subject matter in this manual.
TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT IN THIS
DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT LAWS AND OTHER
LEGAL RIGHTS WORLDWIDE. THEIR USE, REPRODUCTION, AND TRANSMITTAL TO THIRD
PARTIES WITHOUT EXPRESS WRITTEN PERMISSION MAY RESULT IN LEGAL
PROCEEDINGS.
The furnishing of this manual to any party does not give that party or any third party any
license to these patents, trademarks, copyrights or other intellectual property rights,
except as expressly provided in any written agreement of ROSSLARE.
ROSSLARE reserves the right to revise and change this document at any time, without
being obliged to announce such revisions or changes beforehand or after the fact.

Table of Contents
AC-225x-B Series Hardware Installation and User Manual iii
Table of Contents
1. Introduction .......................................................................... 8
1.1 AxTraxNG...................................................................................................... 9
1.1.1 Client-Server Structure ..........................................................................................10
1.1.2 Configurable Links .................................................................................................10
2. Technical Specifications........................................................ 11
2.1 AC-225x-DIN ............................................................................................... 11
2.2 AC-225x-B Installed in ME-1015 ................................................................. 12
3. AC-225x-B Panel Setup........................................................ 13
3.1 Inputs Wiring –Non-Supervised Inputs...................................................... 14
3.2 Inputs Wiring –Supervised Inputs.............................................................. 14
3.3 Outputs Wiring ........................................................................................... 15
3.4 Power Supply.............................................................................................. 17
3.5 AC-225x-B Wiring Communications ........................................................... 18
3.6 Reader ........................................................................................................ 19
3.7 MD-IO84B................................................................................................... 19
3.8 MD-D02B.................................................................................................... 19
4. Input and Output Connections .............................................. 20
4.1 Input Types................................................................................................. 20
4.1.1 Normally Open Input Connection.......................................................................... 20
4.1.2 Normally Closed Input Connection ........................................................................21
4.1.3 Normally Open Supervised Single Resistor Input Connection................................ 21
4.1.4 Normally Open Supervised Double Resistor Input Connection.............................. 21
4.1.5 Normally Closed Supervised Single Resistor Input Connection.............................. 22
4.1.6 Normally Closed Supervised Double Resistor Input Connection............................23
4.2 Inputs Description ...................................................................................... 23
4.2.1 Request-to-Exit (REX) Button Input .......................................................................23
4.2.2 Door Monitor Input ............................................................................................... 23

Table of Contents
iv AC-225x-B Series Hardware Installation and User Manual
4.2.3 General Purpose Inputs .........................................................................................24
4.3 Outputs....................................................................................................... 24
4.4 Card Readers and Keypads ......................................................................... 25
5. AC-225x-B Hardware Settings .............................................. 27
5.1 DIP Switch Configuration............................................................................ 27
5.2 Access Control Panel Baud Rate ................................................................. 28
5.3 Access Control Panel Type.......................................................................... 28
5.4 Access Control Panel Addressing................................................................ 30
6. Communications.................................................................. 32
6.1 Serial Network Connection......................................................................... 32
6.1.1 RS-232 Connection to the Computer..................................................................... 32
6.1.2 RS-485 Connection to the Computer..................................................................... 33
6.1.3 Daisy Chaining .......................................................................................................34
6.2 TCP/IP Network Connection....................................................................... 35
6.2.1 LAN and WAN Requirements................................................................................. 35
A. Declaration of Conformity..................................................... 37
B. Radio Equipment Directive (RED) ........................................... 38
C. RoHS Directive ..................................................................... 39
D. UL 294 7th Edition ................................................................ 40
E. Limited Warranty.................................................................. 41

List of Figures
AC-225x-B Series Hardware Installation and User Manual v
List of Figures
Figure 1: AC-225x-B Panel Layout ............................................................................. 9
Figure 2: AC-225x-B Sample Configuration ............................................................. 13
Figure 3: Inputs Wiring –Non-supervised Inputs.................................................... 14
Figure 4: Door Lock –Failed Close........................................................................... 15
Figure 5: Door Lock –Failed Open .......................................................................... 16
Figure 6: Wiring Between PM-10 and AC-225x-B.................................................... 17
Figure 7: AC-225x-B Wiring Communications ......................................................... 18
Figure 8: Reader Wiring .......................................................................................... 19
Figure 9: Connector Location for MD-IO84B or MD-D02B Expansions ................... 19
Figure 10: Normally Open Input Connection .......................................................... 20
Figure 11: Normally Closed Input Connection......................................................... 21
Figure 12: Normally Open Supervised Input Connection (Single Resistor) ............. 21
Figure 13: Normally Open Supervised Input Connection (Double Resistor) ........... 22
Figure 14: Normally Closed Supervised Input Connection (Single Resistor) ........... 22
Figure 15: Normally Closed Supervised Input Connection (Double Resistor) ......... 23
Figure 16: DIP Switches........................................................................................... 27
Figure 17: RS-232 Panel Connection to PC.............................................................. 32
Figure 18: RS-485 Panel Connection to PC.............................................................. 33
Figure 19: Daisy Chaining........................................................................................ 34
Figure 20: Connecting Multiple Access Control Panels to AC-225IP ....................... 35
Figure 21: Connecting a Single Control Panel with MD-N32 ................................... 35
Figure 22: Connecting Multiple Access Control Panels with MD-N32..................... 36

List of Tables
vi AC-225x-B Series Hardware Installation and User Manual
List of Tables
Table 1: Description of AC-225x-B Panels ................................................................. 8
Table 2: AxTraxNG Capabilities ................................................................................. 9
Table 3: DIP Switches and Their Functions.............................................................. 27
Table 4: Switch Baud Rates ..................................................................................... 28
Table 5: Possible Hardware Settings ....................................................................... 28
Table 6: Available Panel Addresses ......................................................................... 30
Table 7: RS-232 Connection .................................................................................... 33
Table 8: UL 294 Access Control Performance Ratings............................................. 40

Notice and Disclaimer
AC-225x-B Series Hardware Installation and User Manual vii
Notice and Disclaimer
This manual’s sole purpose is to assist installers and/or users in the safe and
efficient installation and usage of the system and/or product, and/or software
described herein.
BEFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM,THE INSTALLER AND THE
USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY
REQUIREMENTS AND OPERATING PROCEDURES.
▪The system must not be used for purposes other than those for which it was
designed.
▪The use of the software associated with the system and/or product, if
applicable, is subject to the terms of the license provided as part of the
purchase documents.
▪ROSSLARE exclusive warranty and liability is limited to the warranty and
liability statement provided in an appendix at the end of this document.
▪This manual describes the maximum configuration of the system with the
maximum number of functions, including future options. Therefore, not all
functions described in this manual may be available in the specific system
and/or product configuration you purchased.
▪Incorrect operation or installation, or failure of the user to effectively
maintain the system, relieves the manufacturer (and seller) from all or any
responsibility for consequent noncompliance, damage, or injury.
▪The text, images and graphics contained in the manual are for the purpose of
illustration and reference only.
▪All data contained herein subject to change without prior notice.
▪In no event shall manufacturer be liable for any special, direct, indirect,
incidental, consequential, exemplary or punitive damages (including, without
limitation, any and all damages from business interruption, loss of profits or
revenue, cost of capital or loss of use of any property or capital or injury).
▪All wiring diagrams are intended for reference only, the photograph or
graphic of the PCB(s) are intended for clearer illustration and understanding
of the product and may differ from the actual PCB(s).

Introduction
8 AC-225x-B Series Hardware Installation and User Manual
1. Introduction
In this manual, unless otherwise stated, “AC-225x-B” refers to both the regular AC-
225-B and the AC-225IP-B moels
The AC-225x-B series of access control panels are state-of-the-art networked
access controllers, employing the latest technology to meet the requirements of
the market.
Table 1 summarizes the series of AC-225x-B models and their respective
descriptions.
Table 1: Description of AC-225x-B Panels
Model Name
Description
AC-225-BA
Installed in ME-1015 with Type I plug power cable
AC-225-BB
Installed in ME-1015 with Type G plug power cable
AC-225-BE
Installed in ME-1015 with Type F plug power cable
AC-225-BU (#)
Installed in ME-1015 with Type B plug power cable
AC-225-DIN (#)
PCBA only with wall / DIN rail mounting base
AC-225IP-BA
Installed in ME-1015 with Type I plug power cable
AC-225IP-BB
Installed in ME-1015 with Type G plug power cable
AC-225IP-BE
Installed in ME-1015 with Type F plug power cable
AC-225IP-BU (#)
Installed in ME-1015 with Type B plug power cable
AC-225IP-DIN (#)
PCBA only with wall / DIN rail mounting base
The IP models also includes onboard support for communications across a TCP/IP
network.
(#) UL Certified.
When used in combination with Rosslare's AxTraxNG™ software system, the AC-
225x-B gives you full control over access to your premises. The system can control
both single and double door entrances and up to four doors, with MD-D02B 2-door
expansion module. AC-225x-B supports up to 30,000 users and uses flash memory
to enable easy firmware upgrades. For more information on the AxTraxNG system,
refer to the AxTraxNG™ Software Installation and User Manual.
The AC-225x-B comes either as a PCBA “DIN” module that can be wall or DIN rail
mountable, or pre-assembled within the ME-1015 power management enclosure.
The ME-1015 contains a universal switch mode power supply that accepts inputs
from 90 ~ 240 VAC (50 ~ 60 Hz) and outputs 60 watts, a power management board
that provides two independently fused 12 VDC, 2 Amp power outputs –one for
the controller and readers, and one for locks. The ME-1015 power management
enclosure also includes an alert sounder, a lead acid battery charger for a lead acid

Introduction
AC-225x-B Series Hardware Installation and User Manual 9
battery of up 12 V and 7 Ah, and an intelligent light bar that provides enclosure
lighting, an enclosure tamper sensor, and a power status LED indicator.
Figure 1 shows the general layout of the AC-225x-B panel.
Figure 1: AC-225x-B Panel Layout
1.1 AxTraxNG
The AxTraxNG software system is designed to set up, manage, and supervise all
aspects of an access control panel network.
Table 2 presents the AxTraxNG software capabilities:
Table 2: AxTraxNG Capabilities
Users capacity
30,000
Unauthorized Users
30,000
Access groups
30,000
Number of panels in system
1,023
Number of doors in system
4,092
These options are software and firmware dependent, and may change in later
releases or revisions.

Introduction
10 AC-225x-B Series Hardware Installation and User Manual
1.1.1 Client-Server Structure
AxTraxNG operates through a dedicated AxTrax server computer, which
communicates with the access control panels and can serve an unlimited number
of network clients.
The server also runs the system's SQL database, which contains settings and
definitions for access control across the entire facility. Clients can define new
employees and control access permissions. The system includes tools for database
backup, input and export of previous configurations and automatic backing-up on
a periodic basis.
1.1.2 Configurable Links
The system's configurable links model makes it possible to trigger any chosen
output automatically or report a configurable alarm, based on a selected input.
This allows easy integration with related access systems such as intruder alarms,
CCTV systems and elevator controls.
AxTraxNG can also define a selected set of operations (defined in configurable
links) when a panel registers a specified user or group of users. This can be useful,
for example, in elevator control systems. The system can assign users with
counters, allowing a limited number of entries to each panel.

Technical Specifications
AC-225x-B Series Hardware Installation and User Manual 11
2. Technical Specifications
2.1 AC-225x-DIN
Electrical Characteristics
Operating Voltage
12 VDC, 1.5 A from a regulated power supply
Maximum Input Current
AC-225
Standby: 80 mA
Maximum: 325 mA
AC-225IP
Standby: 120 mA
Maximum: 370 mA
General Inputs
•4 supervised high impedance inputs
•8 or 12 supervised inputs when using MD-D02B or
MD-IO84B expansion boards
•Maximum voltage: 5 VDC
Relay Outputs
•4 Form C 5 Amp relay outputs
•8 outputs when using MD-D02B or MD-IO84B
expansion boards
Reader Ports
•2 reader ports, 4 reader ports when using
MD-D02B
•Communication: Wiegand (D0, D1) or Clock & Data
(C, D)
•Output voltage to reader: 12 VDC (battery only:
8.8-11.8 VDC)
•Max. current to reader: 245 mA
•LED control output and Tamper Input
Visual Indicators
11 LEDs for outputs and communication status
Audio
Sounder output for use with compatible speakers
provide chime, bell and siren signals
Battery Standby Time
3 hours with a 12 V, 7 Ah lead acid battery
Communication Characteristics
RS-485 / RS-232
•RS-485 or optional RS-232
•RS-485 connection by terminal block or MD-14U
connector
•RS-232 connection by terminal block
RS-232
Terminal Block
RS-485
Molex and Terminal Block
TCP/IP
On-board RJ-45 connector
(functional on AC-225IP models only)
Selectable Communication Speed
9600, 19200, 57600, 115200 bps

Technical Specifications
12 AC-225x-B Series Hardware Installation and User Manual
Environmental Characteristics
Operating Temperature Range
0°C to 49°C (32°F to 120°F)
Operating Humidity Range
0 to 85% (non-condensing)
Dimensions
Height x Width x Depth
193 x 136.5 x 39 mm (7.6 x 5.4 x 1.5 in.)
Weight
0.36 kg (12.7 oz)
2.2 AC-225x-B Installed in ME-1015
Electrical Characteristics –Switch Mode Power Supply
Operating Voltage
90 ~ 240 VAC, 50 ~ 60 Hz from mains power
Maximum Input Current
1.5 A
Output Power
15 VDC, 4 A (60 Watts) to the power
management board
Electrical Characteristics –Power Management Board (PM-10)
Input Power
15 VDC, 4 A to the power management board
Output Power
Two PTC fused outputs
Each provides 13.8 VDC, 1.5 A (battery only: 8.8-
11.8 VDC)
One output for controller and readers
One output for locks
Battery Charger
13.8 VDC, 300 mA for 12 VDC, 7 Ah Lead Acid
Battery
Speaker
0.5 Watt, 8 Ohm
Light Bar
0.3 Watt for LED light
Environmental Characteristics
Operating Temperature Range
0°C to 49°C (32°F to 120°F)
Operating Humidity Range
0 to 85% (non-condensing)
Dimensions
Height x Width x Depth
364 x 264 x 87.4 mm (14.3 x 10.4 x 3.4 in.)
Weight
3.4 kg (7.5 lb)

AC-225x-B Panel Setup
AC-225x-B Series Hardware Installation and User Manual 13
3. AC-225x-B Panel Setup
Each AC-225x-B panel controls one or two doors (up to 4 doors with MD-D02B).
The panels connect together in a network and are controlled by a central server
computer, running the AxTraxNG software system.
Figure 2 shows an example setup for a network of AC-225x-B access control panels.
Figure 2: AC-225x-B Sample Configuration
The use of bushings is required for any conductors leaving the enclosure through
the provided openings.

AC-225x-B Panel Setup
14 AC-225x-B Series Hardware Installation and User Manual
3.1 Inputs Wiring –Non-Supervised Inputs
Figure 3 presents a detailed view of the non-supervised inputs and their
connection options.
Figure 3: Inputs Wiring –Non-supervised Inputs
3.2 Inputs Wiring –Supervised Inputs
When wiring the AC-225x for supervised inputs, resistors should be placed on the
input switch and not on the terminal block.
For further details, see Chapter 4.

AC-225x-B Panel Setup
AC-225x-B Series Hardware Installation and User Manual 15
3.3 Outputs Wiring
Figure 4 and Figure 5 illustrate wiring for two main types of 12 VDC electrical
release mechanisms. Other electrical devices can be switched using the voltage
free relay contacts.
Figure 4: Door Lock –Failed Close

AC-225x-B Panel Setup
16 AC-225x-B Series Hardware Installation and User Manual
Figure 5: Door Lock –Failed Open

AC-225x-B Panel Setup
AC-225x-B Series Hardware Installation and User Manual 17
3.4 Power Supply
Figure 6 illustrates wiring between the PM-10 power management board and the
AC-225x-B. Make sure the connection polarity is correct, (+) to (+) and (-) to (-).
Connect the power to the input power terminals of the control panel. It is
recommended to add a 12 VDC lead acid backup battery (requires the ME-1015
Power Management Enclosure) to have uninterrupted operation in case main
power supply fails. A 12 V, 7 AH battery provides 3 hours of backup operation.
Figure 6: Wiring Between PM-10 and AC-225x-B

AC-225x-B Panel Setup
18 AC-225x-B Series Hardware Installation and User Manual
3.5 AC-225x-B Wiring Communications
Figure 7 presents a detailed view of the access control panel with all it wiring
communications.
Figure 7: AC-225x-B Wiring Communications

AC-225x-B Panel Setup
AC-225x-B Series Hardware Installation and User Manual 19
3.6 Reader
Readers are supplied with a limited cable length. When extending the wire, make
sure to match the conductors to the correct terminals on the AC-225x-B panel
(Figure 8).
Refer to the reader specifications for the maximum cable length (typically 150 m
with an 18 AWG cable).
Figure 8: Reader Wiring
3.7 MD-IO84B
The MD-IO84 is an optional I/O expansion board which adds four relay outputs and
eight supervised inputs to the access control panel. Attach the MD-IO84B to the
AC-225x-B's expansion slot, as marked in red in Figure 9.
Figure 9: Connector Location for MD-IO84B or MD-D02B Expansions
For more information, see the MD-IO84B Installation and User Guide.
3.8 MD-D02B
The MD-D02B is an optional reader expansion board which adds two readers, four
relay outputs and four supervised inputs to the access control panel. Attach the
MD-D02B to the AC-225x-B's expansion slot, as marked in red in Figure 9.
For more information, see the MD-D02B Installation and User Guide.

Input and Output Connections
20 AC-225x-B Series Hardware Installation and User Manual
4. Input and Output Connections
This chapter describes the AC-225x-B access control panel's input and output
connections.
4.1 Input Types
There are four input types –Normally Open, Normally Closed, Normally Open
Supervised 1 or 2 resistors, and Normally Closed Supervised 1 or 2 resistors.
Inputs IN1, IN1A, IN2 and IN2A may be configured individually as either supervised
or non-supervised inputs. Configure each input separately via the AxTraxNG
system.
Non-supervised inputs have two states:
▪Normal State
▪Abnormal State
Supervised inputs have three states:
▪Normal State
▪Abnormal State
▪Trouble State
The Trouble state is caused by either tampering with the input circuit or by faulty
hardware installation. Once configured as supervised input, add a resistor of 2.2
kΩ, of 8.2 kΩor both on the input circuit. See the figures in the following
subsections.
4.1.1 Normally Open Input Connection
Normally Open Input has 2 states:
▪Switch Open –Normal State:
Loop resistance = Infinite (open circuit).
▪Switch Closed –Abnormal State:
Loop resistance = 0 (short circuit)
Figure 10: Normally Open Input Connection