Becker Ar 4201 Owner's manual

Becker Avionics GmbH •Baden-Airpark B108 •77836 Rheinmünster •Germany

+49 (0) 7229 / 305-0 •Fax +49 (0) 7229 / 305-217

http://www.becker-avionics.com •E-mail: info@becker-avionics.com

Retrofit-Instructions

AR6201

Technical Instruction

Manual AR6201 Retrofit-Instructions

Issue 01 November 2016

Article-No. 0649.996-071

Technical Instruction

General Description

2 AR6201 Retrofit-Instructions Issue 01 November 2016

Preface

Dear Customer,

Thank you for purchasing Becker Avionics products.

We are pleased that you have chosen our product and we are confident that it will meet your

expectations.

For development of our product, the guidelines for highest quality and reliability have been borne in

mind, supplemented by selection of high quality material, responsible production and testing in

accordance to the ISO 9001 and DIN EN 9100 standards.

Our competent customer support department will respond on any technical question you may have.

Please do not hesitate to contact us at any time.

VHF-Transceiver

AR4201 (Single Block Transceiver)

AR6201 (Single Block Transceiver)

Technical Instruction

General Description

Retrofit-Instructions Issue 01 November 2016 AR6201 3

List of Effective Pages and Changes

Only technical relevant modifications are described in this table.

Document: AR6201 Retrofit-Instructions Issue 01 Article Number 0649.996-071

Cover Page 11/2016

Introduction 11/2016

Chapter 1 – 6 11/2016

Issue Page No.: Section /

Chapter Description

01 1...20 all First Edition

Technical Instruction

General Description

4 AR6201 Retrofit-Instructions Issue 01 November 2016

Table of Contents

1. General Description.......................................................................................................................8

1.1. Introduction....................................................................................................................................8

1.2. Device Assignment........................................................................................................................8

2. Preparation - Transceiver Replacement......................................................................................9

2.1. Visual Inspection ...........................................................................................................................9

2.2. Functional Test..............................................................................................................................9

3. Replacement of the Transceiver ................................................................................................10

3.1. AR4201 →AR6201.....................................................................................................................10

3.1.1. Removal of AR4201..........................................................................................................10

3.2. Pin Compatibility AR4201 - AR6201 ...........................................................................................11

3.2.1. Dynamic Microphone Input ...............................................................................................12

3.2.2. Temperature Sensor .........................................................................................................12

3.2.3. RS232 Interface ................................................................................................................12

3.2.4. AFCU/AGC/AFWB............................................................................................................12

3.2.5. CPIN (if Installed)..............................................................................................................12

3.2.6. +13.75 V Switched (AR4201) - PWR_EVAL (AR6201)....................................................12

3.3. Verification...................................................................................................................................13

4. Post Installation Test................................................................................................................... 14

4.1.1. Mechanical Installation and Wiring Check ........................................................................14

4.1.2. Power Supply....................................................................................................................14

4.1.3. Receiver / Transmitter Operation......................................................................................14

4.1.4. Antenna Check..................................................................................................................14

4.1.5. Interference Check............................................................................................................15

4.1.6. Flight Test Check ..............................................................................................................16

4.2. Magnetic Compass Interference Test .........................................................................................17

5. Technical Data .............................................................................................................................18

6. Index..............................................................................................................................................20