Bedslide SIDE KIX User manual

GET TO IT.
Supplied Hardware: (8) TRAX slot mounts,
(8) 1/4-20 X 1 1/4” phillips combo head,
(8) 1/4-20 serrated flange nuts, (4) Side towers,
(4) 1/4-20 x 3/4 button head bolts, (4) D-ring tie downs,
(1) 58” Guardrail
Tools Needed: Phillips screwdriver, 1/8” allen wrench,
7/16 wrench
SIDE KIX
STEP 1.
ATTACH TOWERS TO SIDE KIX
Align pre-drilled holes inside the bins with the mounting holes on each TOWER. Flat side of the
TOWERS must face out. Secure the TOWERS to each SIDE KIX using the supplied 1/4-20 x 1 1/4
Phillips combo head bolts and 1/4-20 serrated flange nuts as illustrated below.
DO NOT OVER TIGHTEN THE HARDWARE!
NOTE: The SIDE KIX are directional so make certain the “BEDSLIDE” logo is facing forward and out!
DRIVER SIDE
LEFT/
PASSENGER SIDE
RIGHT/

STEP 2.
INSERT (2) MOUNT BLOCKS INTO EACH GUARDRAIL
Loosen and remove the 1/4-20 x 5/8 set screw securing the plastic end cap on the ends of each
GUARDRAIL. Then loosen and remove the 1/4-20 x 3/4 button head securing the GUARDRAIL to each
of the SIDE TOWERS mounted on the BEDSLIDE. Insert (2) MOUNT BLOCKS into the open end of each
GUARDRAIL. Re-attach GUARDRAIL to the SIDE TOWERS along with the plastic end caps to each side.
A.
B.
C.
Page1 of 3
BEDSLIDE.COM | 888.807.0099
INSERT x2
Page1 of 3
BEDSLIDE.COM | 888.807.0099
REMOVE
Page1 of 3
BEDSLIDE.COM | 888.807.0099
RE-INSTALL
A.
B.
C.

STEP 3.
ATTACH SIDE KIX TO TOWERS
To attach the SIDE KIX, tuck them under the GUARDRAILS on the BEDSLIDE and secure them
with a D-ring tie down. Turn the D-rings clockwise into the (2) MOUNT BLOCKS in the rail to
tighten them into place. Repeat to the opposite side.
DRIVER SIDE
PASSENGER SIDE
Page1 of 3
BEDSLIDE.COM | 888.807.0099
D-RING TIE DOWNS

STEP 4.
ATTACH SUPPORT BAR
Insert (2) MOUNT BLOCKS into the rail and position the 48” support bar to the back (cab end) of the SIDE KIX.
Insert (2) 1/4-20 x 3/4 button head bolts into the pre-drilled holes located inside the bins and into the
MOUNT BLOCKS in the rail. Tighten all (4) 1/4-20 x 3/4 bolts to secure the support bar.
Installation is complete!
FRONT VIEW
REAR VIEW
Choose premium truck bed accessories now and transport your cargo safely and easily.