Behringer U-CONTROL UCA200 User manual

Operating Manual
Version 1.0 January 2006
U-CONTROL UCA200

2
U-CONTROL UCA200
CAUTION: To reduce the risk of electric
shock, do not remove the top
cover (or the rear section). No
user serviceable parts inside;
refer servicing to qualified
personnel.
WARNING: To reduce the risk of fire or
electric shock, do not expose
this appliance to rain and
moisture. The apparatus shall
not be exposed to dripping or
splashing and no objects filled
with liquids, such as vases, shall
be placed on the apparatus.
This symbol, wherever it appears,
alerts you to the presence of unin-
sulated dangerous voltage inside the
enclosure—voltage that may be
sufficient to constitute a risk of shock.
This symbol, wherever it appears,
alerts you to important operating and
maintenanceinstructionsintheaccom-
panying literature. Please read the
manual.
IMPORTANT SAFETY INSTRUCTIONS

DEUTSCH
3
U-CONTROL UCA200
DETAILEDSAFETYINSTRUCTIONS:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
8) Only use attachments/accessories specified by the manufacturer.
9) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
10) CAUTION - These service instructions are for use by qualified service personnel only. To reduce the risk of
electric shock do not perform any servicing other than that contained in the operation instructions unless you are
qualified to do so.

4
U-CONTROL UCA200
UCA200UCA200 UCA200UCA200
UCA200
VUltra-flexible audio interface connects your instruments, mixer etc. with your computer for
recording and playback
VHigh-resolution 48 kHz converters for high-end audio quality
VWorks with your PC or Mac–no setup or drivers required. Free audio recording and editing
software downloadable at www.behringer.com
VPowered via USB bus–no external power supply needed
VHigh-quality components and exceptionally rugged construction ensure long life
VConceivedand designedby BEHRINGERGermany
All Trademarks mentioned belong to their respective owners and are not affiliated with BEHRINGER®
Ultra low-latency 2 In/2 Out USB/Audio Interface
U-CONTROL

DEUTSCH
5
U-CONTROL UCA200
FOREWORD
Dear Customer,
welcome to the team of U-CONTROL users, and thank you very much
for expressing your confidence in us by purchasing the UCA200. It is
one of my most pleasant tasks to write this letter to you, because it is the
culmination of many months of hard work delivered by our engineering
team to reach a very ambitious goal: to develop a first rate unit, which is
flexible enough to be used mobile as well as within studio setups.
The task to design our new UCA200 certainly meant a great deal of
responsibility. You, the discerning user and musician, were the focus
of our entire development efforts. It also meant a lot of work and night
shifts to accomplish this goal. But it was fun, too. Developing a pro-
duct usually brings a lot of people together, and what a great feeling
it is when everybody who participated in such a project can be proud
of what we’ve achieved.
It is our philosophy to share our joy with you, because you are the
most important member of the BEHRINGER family. With your highly competent suggestions for new
products you’ve greatly contributed to shaping our company and making it successful. In return, we
guarantee you uncompromising quality as well as excellent technical and audio properties at an
extremely favorable price. All of this will enable you to fully unfold your creativity without being
hampered by budget constraints.
We are often asked how we can make it to produce such high-grade devices at such unbelievably
low prices. The answer is quite simple: it’s you, our customers! Many satisfied customers means
large sales volumes enabling us to get better conditions of purchase for components, etc. Isn’t it only
fair to pass this benefit back to you? Because we know that your success is our success, too!

6
U-CONTROL UCA200
I would like to thank all people whose help on U-CONTROL UCA200 has made it all possible.
Everybody has made very personal contributions, starting from the designers of the unit via the
many staff members in our company to you, the user of BEHRINGER products.
My friends, it’s been worth the trouble!
Thank you very much,
UliBehringer

DEUTSCH
7
U-CONTROL UCA200
INHALTSVERZEICHNIS
1.INTRODUCTION ........................................................................................... 8
1.1 Before you started .............................................................................................................. 9
1.1.1 Shipment ..................................................................................................................... 9
1.1.2 Initial operation ............................................................................................................ 9
1.1.3 Online registration .................................................................................................... 10
2.SYSTEM REQUIREMENTS......................................................................... 11
2.1 Hardware connection .........................................................................................................11
3.OPERATING ELEMENTSANDCONNECTIONS ......................................... 12
3.1 Top view ............................................................................................................................. 12
3.2 Connections........................................................................................................................ 13
4. WORKING WITH THE UCA200 .................................................................. 14
4.1 Application example............................................................................................................ 14
5.AUDIO CONNECTIONS .............................................................................. 16
5.1 Wiring .................................................................................................................................. 16
6. SPECIFICATIONS ...................................................................................... 17
7.WARRANTY ............................................................................................... 19

8
U-CONTROL UCA200
1. INTRODUCTION
Welcome to the family of U-CONTROL users and thank you for expressing your confidence in
BEHRINGER products by purchasing the UCA200. With the UCA200 you have purchased a high-
performance audio interface that includes a USB connector. It is thus an ideal sound card for your
laptop computer or an essential recording/playback component for studio environments that invol-
ve desktop computers.
The UCA200 is PC and Mac-compatible. Therefore, no separate installation procedure is required,
while the operating system drivers ensure an extremely short latency.
Thanks to its robust construction and compact dimensions, the UCA200 is also ideal for traveling.
2 inputs and outputs give you total connecting flexibility to mixing consoles and loudspeakers.
Power is supplied to the unit via the USB interface. The LED gives you a quick check that the
UCA200 is properly connected to the computer. The UCA200 is the ideal extra for every computer
musician.
1.INTRODUCTION

DEUTSCH
9
U-CONTROL UCA200
1.INTRODUCTION
1.1 Before you started
1.1.1 Shipment
Your UCA200 was carefully packed at the assembly plant to assure secure transport. Should the
condition of the cardboard box suggest that damage may have taken place, please inspect the unit
immediately and look for physical indications of damage.
Damaged equipment should NEVER be sent directly to us. Please inform the
dealer from whom you acquired the unit immediately as well as the transporta-
tion company from which you took delivery. Otherwise, all claims for replace-
ment/repair may be rendered invalid.
Please always use the original packaging to avoid damage due to storage or
shipping.
Never let unsupervised children play with the equipment or with its packaging.
Please dispose of all packaging materials in an environmentally friendly fashion.
1.1.2 Initial operation
Please make sure the unit is provided with sufficient ventilation, and never place the UCA200 on top
of an amplifier or in the vicinity of a heater to avoid the risk of overheating.
The current supply is made via the USB connecting cable, so that there is no external power supply
unit required. All required safety precautions have been adhered to.

10
U-CONTROL UCA200
1.INTRODUCTION
1.1.3 Online registration
Please do remember to register your new BEHRINGER equipment right after your purchase by
visiting www.behringer.com (alternatively www.behringer.de) and kindly read the terms and con-
ditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible.
To arrange for warranty service, please contact the retailer from whom the equipment was pur-
chased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one
of our subsidiaries. Corresponding contact information is included in the original equipment packag-
ing (Global Contact Information/European Contact Information). Should your country not be listed,
please contact the distributor nearest you. A list of distributors can be found in the support area of
our website (www.behringer.com/support).
Registering your purchase and equipment with us helps us process your repair claims quicker and
more efficiently.
Thank you for your cooperation!

DEUTSCH
11
U-CONTROL UCA200
2.SYSTEMREQUIREMENTS
2. SYSTEM REQUIREMENTS
The UCA200 is PC and Mac-compatible. Therefore, no installation procedure or
drivers are required for the correct functioning of the UCA200.
To work with the UCA200, your computer must fulfill the following ninimum requirements:
PC MAC
®
Intel
®
or AMD
®
CPU, 400 MHz or higher G3, 300 MHz or higher
minimum 128 MB RAM minimum 128 MB RAM
USB 1.1 interface USB 1.1 interface
Windows
®
XP, 2000 Mac OS
®
X 9.0.4 or higher
2.1 Hardware connection
Use the USB connecting cable supplied with the UCA200 to connect the unit to your computer. The
USB connection also supplies the UCA200 with current. You can connect a variety of devices and
equipment to the inputs and outputs.

12
U-CONTROL UCA200
3.OPERATINGELEMENTSANDCONNECTIONS
3. OPERATING ELEMENTS AND CONNECTIONS
3.1 Top view
Fig. 3.1: Top view of the UCA200
The LED indicates the status of the USB power supply.

DEUTSCH
13
U-CONTROL UCA200
3.OPERATINGELEMENTSANDCONNECTIONS
3.2Connections
2 3
Fig. 3.2: Connections of the UCA200
Use the LINE-OUT jacks for audio cables with cinch connectors.
Use the LINE-IN jacks for audio cables with cinch connectors.

14
U-CONTROL UCA200
4. WORKING WITH THE UCA200
4.1 Application example
Fig. 4.1: Common version with the UCA200
4.WORKINGWITHTHEUCA200

DEUTSCH
15
U-CONTROL UCA200
4.WORKINGWITHTHEUCA200
To provide a professional recording interface between mixing console and computer, you can use
the UCA200 in combination with a suitable mixing console that includes subgroup outputs. This type
of setup allows you to record several signals in the computer at the same time, to simultaneously
play back several takes or playbacks which have been recorded, and to listen to the whole recor-
ding via loudspeakers. Figure 4.1 shows a possible setup with one UCA200.
Connect the outputs of the subgroup (in this case ALT 3-4 OUT) with the inputs of the UCA200 .
You can choose to connect the outputs of the interface either to the TAPE INPUT sockets or to
your monitor speakers. Over the headphone output of your mixing console, you can connect for
example the stereo headphones HPS 3000 to controling. Use the USB cable supplied with the unit to
connect your PC or MAC®via the USB interface.
By routing each channel that you want to record through the ALT3-4 subgroup, you can now use
the input channels of the mixing console to record different signals (e.g. microphone, guitar, sound
module, etc.) in the computer. If you connect the OUT jacks of the UCA200 to channel inputs 7/8 (not
via TAPE INPUT), make sure that the signal is not switched to the subgroup but instead to the main
output of your mixer (MUTE key on the UB1204FX-PRO in channel 7/8 not pressed). Otherwise
feedback can occur. Make sure that you use the SOURCE section on the mixing console to select the
correct monitoring paths (ALT 3-4 and MAIN MIX or ALT 3-4 and TAPE).
If you lead the UCA200 back via a channel input (not TAPE INPUT), you can also use the aux path in
the channel to set up a monitor mix for live musicians. To do this, use the Aux Send (e.g. Aux 1) in
this channel input. If the musicians want to hear themselves as well as the playback or previous
recording takes, use the Aux Sends in the recording channels to mix in the recording signals with the
monitormix.

16
U-CONTROL UCA200
5. AUDIO CONNECTIONS
Although there are various ways to integrate the UCA200 into your studio or live set-up, the audio
connections to be made will basically be the same in all cases:
5.1 Wiring
Please use standard cinch cables to connect the UCA200 to other audio equipment. It exists to
connect also the possibility a mono adapter cable.
Fig. 5.1: Wiring standard cinch cables
Fig. 5.2: Mono adapter cable
5. AUDIOCONNECTIONS

DEUTSCH
17
U-CONTROL UCA200
6. SPECIFICATIONS
LINEIN
Connectors cinch, unbalanced
Inputimpedance approx. 27 kΩ
Max. input level 2 dBV
LINEOUT
Connectors cinch, unbalanced
Output impedance approx. 400 Ω
Max. output level 2 dBV
USB 1.1
Connectors typ A
DIGITALPROCESSING
Converter 16-bit converter
Sample rate 32.0 kHz, 44.1 kHz, 48.0 kHz
SYSTEM DATA
Frequency response 10 Hz to 20 kHz, ± 1 dB @ 44.1 kHz sample rate
10 Hz to 22 kHz, ± 1 dB @ 48.0 kHz sample rate
THD 0.05 % typ. @ -10 dBV, 1kHz
Crosstalk -77 dB @ 0 dBV, 1 kHz
Signal-to-noise ratio A/D 89 dB typ. @ 1 kHz, A-weighted
D/A 96 dB typ. @ 1 kHz, A-weighted
6. SPECIFICATIONS

18
U-CONTROL UCA200
POWERSUPPLY
USB connection 5 V , 100 mA max.
DIMENSIONS/WEIGHT
Dimensions (H x W x D) approx. 22 mm (0.87") x 88 mm (3.46") x 60 mm (2.36")
Weight approx. 0.12 kg
BEHRINGER always takes great care to ensure the highest standard of quality. Any modifications which may be
necessary will be made without prior notification. Technical data and appearance of the equipment can therefore
differ from the details or illustrations shown.
6. SPECIFICATIONS

DEUTSCH
19
U-CONTROL UCA200
7. WARRANTY
§1 OTHER WARRANTYRIGHTS AND NATIONAL LAW
1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular, any
such rights against the seller that arise from a legally effective purchase contract.
2. The warranty regulations mentioned herein are applicable unless they constitute an infringement of national
warranty law.
§ 2 ONLINE REGISTRATION
Please do remember to register your new BEHRINGER equipment right after your purchase by visiting
www.behringer.com (alternatively www.behringer.de) and kindly read the terms and conditions of our warranty
carefully.
Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently.
Thank you for your cooperation!
§3 WARRANTY
1. BEHRINGER (BEHRINGER International GmbH including all BEHRINGER subsidiaries listed on the enclosed
page, except BEHRINGER Japan) warrants the mechanical and electronic components of this product to be free of
defects in material and workmanship for a period of one (1) year* from the original date of purchase, in accordance
with the warranty regulations described below. If the product shows any defects within the specified warranty period
that are not excluded from this warranty as described under § 5, BEHRINGER shall, at its discretion, either replace
or repair the product using suitable new or reconditioned parts. In the case that other parts are used which constitute
an improvement, BEHRINGER may, at its discretion, charge the customer for the additional cost of these parts.
2. If the warranty claim proves to be justified, the product will be returned to the user freight prepaid.
3. Warranty claims other than those indicated above are expressly excluded.
§ 4 RETURN AUTHORIZATION NUMBER
1. To obtain warranty service, the buyer (or his authorized dealer) must call BEHRINGER (see enclosed list) during
normal business hours BEFORE returning the product. All inquiries must be accompanied by a description of the
problem. BEHRINGER will then issue a return authorization number.
2. Subsequently, the product must be returned in its original shipping carton, together with the return authorization
number to the address indicated by BEHRINGER.
3. Shipments without freight prepaid will not be accepted.
7. WARRANTY

20
U-CONTROL UCA200
§5WARRANTY REGULATIONS
1. Warranty services will be furnished only if the product is accompanied by a copy of the original retail dealer’s
invoice. Any product deemed eligible for repair or replacement under the terms of this warranty will be repaired or
replaced.
2. If the product needs to be modified or adapted in order to comply with applicable technical or safety standards
on a national or local level, in any country which is not the country for which the product was originally developed
and manufactured, this modification/adaptation shall not be considered a defect in materials or workmanship. The
warranty does not cover any such modification/adaptation, irrespective of whether it was carried out properly or not.
Under the terms of this warranty, BEHRINGER shall not be held responsible for any cost resulting from such a
modification/adaptation.
3. Free inspections and maintenance/repair work are expressly excluded from this warranty, in particular, if caused
by improper handling of the product by the user. This also applies to defects caused by normal wear and tear, in
particular, of faders, crossfaders, potentiometers, keys/buttons, tubes, guitar strings, illuminants and similar parts.
4. Damages/defects caused by the following conditions are not covered by this warranty:
Vimproper handling, neglect or failure to operate the unit in compliance with the instructions given in
BEHRINGER user or service manuals.
Vconnection or operation of the unit in any way that does not comply with the technical or safety regulations
applicable in the country where the product is used.
Vdamages/defects caused by force majeure or any other condition that is beyond the control of
BEHRINGER.
5. Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the warranty.
6. If an inspection of the product by BEHRINGER shows that the defect in question is not covered by the warranty,
the inspection costs are payable by the customer.
7. Products which do not meet the terms of this warranty will be repaired exclusively at the buyer’s expense.
BEHRINGER will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within
6 weeks after notification, BEHRINGER will return the unit C.O.D. with a separate invoice for freight and packing.
Such costs will also be invoiced separately when the buyer has sent in a written repair order.
7. WARRANTY