- 8 -
Before this operation, perform the following steps
dependingonthemodelpurchased:
Removethe3panelsasshowninFig.4.
PullhandleasshowninFig.6.
OpenpanelasshowninFig.5.
PullhandleasshowninFig.6.
Iftheappliancehasalid,removeitbyremovingthe4
screwsasshownin.
Markthepositionofthelowersideofthehoodonthewall
().Maintaintheminimumdistancerequiredfromthe
hobasshowninFig..
-Position the xing template on the wall,makingsure
thatthelinecoincideswiththelinepreviouslymadeon
thewall.
-Mark the xing holes and cut them intothematerial
(Fig.3).
-Fixthetopscrewsandscrewanchors(Fig.3),without
tighteningthemcompletely.
-Placetheapplianceagainstthewall,alignitinhorizontal
positionandtightenscrews(Fig.7).
-Oncetheadjustmenthasbeencompleted,xthehood
usingthescrews(Fig.8).
-Whencarryingoutthexingoperations,useonlyscrews
andscrewanchorssuitedtothetypeofwall(e.g.reinforced
concrete,plasterboardetc.).
-Ifthescrewsandscrewanchorsaresuppliedwiththe
appliance,makesurethattheyaresuitedtothetypeof
walltowhichthehoodmustbexed.
-Removethescrewsasshownin(Fig.9A).
-RemovebothgridontheairoutletholeandlidMas
shownin(Fig.9).
-Connectthehoodtotheexible hose (not supplied)
andthehosetotheairexhaustholepreviouslyprepared
(Fig.9).
-Fixthelidonceagainbyusingthescrewspreviously
removedin(Fig.9).
Thismodelmay havedecorativeductsasoptional
accessories-askyourretailerforinformation.
Before xing thedecorative ducts, remove boththe
screwsandlid,asshownin(Fig.10).
Asound-absorbingkitisalsoavailable(tobeorderedasan
accessory)inordertoincreasethequietness
levelofthehood.The sound-absorbing layer must be
appliedto the backofthedecorative panel. Forxing
operations,refertotheinstructionssuppliedwiththekit.
Makesuretheelectricalpowersupplyiswithinthe
measurementsofthedecorativeconnector.
Adjustthewidthofthesupportbracketofthetopconnector
(Fig.11).Thenxittotheceilingsothatitisonthesame
axisasthehoodusingscrews(Fig.11)adheringto
thedistancefromtheceilingshownin(Fig.11).Connect
angetothe air exhaustholeusingexiblehose
(Fig.11).
Slidethetopductintothebottomduct.Fixthebottomduct
tothehoodusingscrews(supplied)(Fig.11).
Pulloutthetopductasfarasthebracketandxitusing
screws(Fig.11).
Theltersshouldbeorderedasaccessoriesfromyour
retailer.
We offer 2differenttypesofkit which can be used to
transformthehoodintoahood,in
accordancewiththetypeofappliancemodelpurchased.
Onekitcontainsextractablelters(g.10)andtheother
containscircularlters(g.15).
1-Ifyoundabracket(suchastheoneindicateding.
14)includedintheproductpackaging,thisshouldbexed
tothehoodusingthescrewssupplied.
Toreplacetheactivecarbonlterspullleveroutwards
asshownin(Fig.10).
2-Ifyourproductisnotsuppliedwithabracket,thismeans
thattheactivecarbonlterisacircularversion(g.15).
Theltersshouldbettedtotheextractionassemblyinside
thehood,bycentringthemandrotatingthem90degrees,
untiltheyclickintoplace(Fig.15).
USE AND MAINTENANCE
•Itisrecommendedtooperatetheapplianceprior to
cooking.
Itisrecommended to leave the applianceinoperation
for 15minutesaftercookingis terminatedinorder to
completelyeliminatecookingvapoursandodours.
Theproperfunctionofthecookerhoodisconditionedby
theregularityofthemaintenanceoperations,inparticular,
theactivecarbonlter.
•Theanti-greaselterscapturethegreaseparticles
suspendedintheair,andarethereforesubjecttoclogging
accordingtothefrequencyoftheuseoftheappliance.
Inordertopreventre hazard, it isrecommendableto
cleanthelteratamaximumof2monthsbycarryingout
thefollowinginstructions:
-Remove the lters from thecookerhoodandwash
theminasolutionofwaterandneutralliquiddetergent,
leavingtosoak.
-Rinsethoroughlywithwarmwaterandleavetodry.
-Theltersmayalsobewashedinthedishwasher.
Thealuminiumpanels mayalterincolourafter several
washes.This is not cause forcustomercomplaintnor
replacementofpanels.
•Theactivecarbonlterspurifytheairthatisreplaced
intheenvironment.Theltersarenotwashable nor
re-useableandmust bereplacedatmaximumevery
four months.The saturationoftheactivecarbon lter
dependson the frequency of use of theappliance,by
thetypeofcookingandtheregularity of cleaning the
anti-greaselters.
