Beko HNT61220XH User manual

www.beko.com
Hood
User manual
EN
HNT61220XH
01M-8898963200-4820-02

2 / EN Cooker Hood / User Manual
1 Important safety and
environmental instructions 4-7
1.1 Safety instructions . . . . . . . . . . . . . . . 4
1.2 Compliance with WEEE regulation and
disposal of waste product . . . . . . . . . . . 6
1.3 Compliance with RoHS Directive . 7
1.4 Packaging of the product . . . . . . . . 7
2 General View 8
2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2 Technical data. . . . . . . . . . . . . . . . . . . . 8
3 Operation of the Appliance 9-10
3.1 Controlling the Appliance. . . . . . . . . 9
3.2 Energy Efficient Operation in
Terms of Saving Use . . . . . . . . . . . . . . . . . 9
3.3 Operating Instructions . . . . . . . . . . . 9
3.4 Replacement of Lamp. . . . . . . . . . . 10
3.5 Operation with Flue Connection 10
3.6 Operation without Flue
Connection. . . . . . . . . . . . . . . . . . . . . . . . . . 10
4 Cleaning and Maintenance 11
4.1 Cleaning of Aluminum Filters. . . . 11
4.2 Replacing Carbon Filters . . . . . . . . 11
5 Installation Of Appliance 12-13
5.1 Position of the Appliance. . . . . . . 12
5.2 Installation Accessories . . . . . . . . . 12
5.3 Installation of the Hood . . . . . . . . . 12
5.4 Connecting to Flue . . . . . . . . . . . . . 13
6 Troubleshooting 14
CONTENTS

Please read this user manual first!
Dear Valued Customer,
Thank you for preferring this Beko appliance. We hope that you get the best results
from your appliance which has been manufactured with high quality and state-of-the-
art technology. For this reason, please read this entire user manual and all other ac-
companying documents carefully before using the appliance and keep it as a reference
for future use. If you handover the appliance to someone else, give the user manual as
well. Follow the instructions by paying attention to all the information and warnings in
the user manual.
Remember that this user manual may also apply to other models. Differences between
models are explicitly described in the manual.
Meanings of the Symbols
Following symbols are used in various sections of this user manual:
CImportant information and useful
hints about usage.
AWARNING: Warnings against
dangerous situations concerning the
security of life and property.
Warning for danger of fire.
BWarning for electric shock.
This appliance has been manufactured in environmentally friendly modern plants
without giving any harm to the nature.
Complies with the WEEE regulation. It does not contain PCB.

4 / EN Cooker Hood / User Manual
1.1 General Safety
Important Safety Instructions Read
Carefully And Keep For Future Ref-
erence This section contains safety
instructions that will help protect
from risk of fire, electric shock, ex-
posure to leak microwave energy,
personal injury or property damage.
Failure to follow these instructions
shall void any warranty.
•Beko products comply with the
applicable safety standards;
therefore, in case of any damage
on the appliance or power cable, it
should be repaired or replaced by
the dealer, service center or a spe-
cialist and authorized service alike
to avoid any danger. Faulty or un-
qualified repair work may be dan-
gerous and cause risk to the user.
•This appliance is intended to be
used in household and similar ap-
plications such as:
– Staff kitchen areas in shops, of-
fices and other working environ-
ments;
– Farm houses
– By clients in hotels, and other
residential type environments;
– Bed and Breakfast type environ-
ments.
•Operate the appliance for its in-
tended purpose only as described
in this manual.
•The manufacturer cannot be held
liable for damages resulting from
improper installation or misuse of
the product.
•This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental ca-
pabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand the
hazards involved.
•Children shall not be allowed play
with the appliance. Cleaning and
user maintenance shall not be
made by children without super-
vision.
•The minimum distance between
the supporting surface for the
cooking vessels on the hob and
the lowest part of your product
must be at least 50 cm for electric
hobs and 65 cm for gas hobs.
•If the instructions for installation
for the gas hob specify a greater
distance, this has to be taken into
account.
•Make sure that your mains power
1 Important safety and environmental instructions

Cooker Hood / User Manual 5 / EN
supply complies with the informa-
tion supplied on the rating plate of
the appliance.
•Never use the appliance if the
power cable or the appliance itself
is damaged.
•Prevent damage to the power
cable by not squeezing, bending,
or rubbing it on sharp edges. Keep
the power cable away from hot
surfaces and naked flame.
•Use the appliance with a grounded
outlet only.
WARNING: Do not connect the appli-
ance to the mains until the installa-
tion is fully complete.
•Place the appliance in a way so
that the plug is always accessible.
•Do not touch the lamps if they
have operated for a long time.
They can burn your hands since
they will be hot.
•Follow the regulations set out
by competent authorities on dis-
charge of the exhaust air (this
warning is not applicable for use
without chimney).
•Operate your appliance after put-
ting a pot, pan etc. on the hob.
Otherwise, high heat may cause
deformation in some parts of your
product.
•Turn off the hob before taking the
pot, pan etc. from it.
•Do not leave hot oil on the hob.
Pans with hot oil may cause self
combustion.
•Pay attention to your curtains
and covers since oil may catch fire
while cooking food such as fries.
•Grease filter must be replaced
at least monthly. Carbon filter
must be replaced at least every 3
months.
•Product shall be cleaned accord-
ance with user manual. If cleaning
was not carried out in accordance
with user manual, there may be
fire risk.
•Do not use non-fire-resistant fil-
tering materials instead of the
current filter.
•Only use the original parts or parts
recommended by the manufac-
turer.
•Do not operate the product with-
out the filter and do not remove
the filters while the product is
running.
•In the event of be started any
flame, de-energize your product
and cooking appliances.
•In the event of be started any
flame, cover the flame and never
1 Important safety and environmental instructions

6 / EN Cooker Hood / User Manual
use water to extinguish.
•Unplug the appliance before each
cleaning and when the appliance
is not in use.
•The negative pressure in the en-
vironment should not exceed 4 Pa
(4 x 10 bar) while the hood for
electric hob and appliances run-
ning on another type of energy
but electricity operate simultane-
ously.
•In the environment where the ap-
pliance is being used, the exhaust
of devices running on fuel oil or
gas, such as room heater must be
absolutely isolated or device must
be hermetical type.
•When connecting the chimney,
use pipes with a diameter of 120
or 150 mm. Pipe connection must
be as short as possible and have as
few elbows as possible.
Danger of choking! Keep all the pack-
aging materials away from children.
CAUTION: Accessible parts may be-
come hot when used with cooking
appliances.
•The product outlet must not be
connected to air channels that in-
clude other smoke.
•The ventilation in the room may
be insufficient when the hood for
electric hob is used simultane-
ously with the devices operating
on gas or other fuels (this may not
apply to appliances that only dis-
charge the air back into the room).
•Objects placed on the product may
fall. Do not place any objects on
the product.
•Do not flambe under the your
product.
WARNING: Before installing the Hood,
remove the protective films.
•Never leave high naked flames
under the hood when it is in oper-
ation
•Deep fat fryers must be continu-
ously monitored during use: over-
heated oil can burst into flames.
1.2 Compliance with the WEEE Directive
and Disposing of the Waste Product:
This product complies with EU WEEE
Directive (2012/19/EU). This prod-
uct bears a classification
symbol for waste electrical and
electronic equipment (WEEE).
This symbol indicates that
this product shall not be dis-
posed with other household
wastes at the end of its ser-
vice life. Used device must be re-
turned to offical collection point for
recycling of electrical and electronic
1 Important safety and environmental instructions

Cooker Hood / User Manual 7 / EN
1 Important safety and environmental instructions
devices. To find these collection
systems please contact to your local
authorities or retailer where the
product was puchased. Each house-
hold performs important role
in recovering and recycling of old
appliance. Appropriate disposal of
used appliance helps prevent po-
tential negative consequences for
the environment and human health.
1.3 Compliance with RoHS Directive
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.
1.4 Package Information
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations. Do not
dispose of the packaging materials
together with the domestic or other
wastes. Take them to the packaging
material collection points designat-
ed by the local authorities.

8 / EN Cooker Hood / User Manual
2 General Appearance
2.1 Overview
2.2 Technical Data
1. Front Panel
2. Switch
3. Aluminum Grease Filter
4. LED Lighting
(Figure 1).
Model HNT 61220 XH
Supply voltage 220-240V ~ 50 Hz
Lamp Power (W) 2 x 3
Motor Power (W) 125
Flow rate (m³/h) – 3.
Level 291
Insulation Class of Motor Class F
Insulation Class Class I
(Figure 2)
497
280
223
281
20
41
Min301 Max421
599
77,5
176
248,5
28
29
462
17,5
Ø118,5
40
50,5

Cooker Hood / User Manual 9 / EN
3 Operation of the Appliance
3.1 Controlling the Appliance
KEY FUNCTION
(A) : Light On / O Pull the sliding plate to the front. Press the but-
ton downwards to turn on the lamp or upwards
to turn o the lamp.
(B) : 1 and 2 Speed
Button Pull the sliding plate to the front. Press the button
upwards to operate the hood at speed level 1, and
downwards to operate the hood at speed level 2.
(C) : 3rd Speed
Button Pull the sliding plate to the front. Press the button
downwards to operate the hood at speed level 3.
3.2 Energy Efficient
Operation in Terms of Saving
Use
•When using your appliance, adjust the
speed settings according to vapour and
odour intensity, in order to save energy.
•Use low speeds (1-2) under normal con-
ditions, and high speeds (3) in intense
odour and vapour.
•The lamps on the hood are placed for
illuminating the cooking area.
Using them for environmental lighting
shall cause unnecessary energy expendi-
ture and insufficient lighting.
3.3 Operating Instructions
•Your appliance contains a motor that
has various speeds.
•For better performance, we recommend
using low speeds under normal condi-
tions and high speeds in cases of strong
odours and intense vapour.
•You can start your appliance by pressing
on the desired speed setting button.
(B,C)
•You can illuminate the cooking area by
pressing the lamp.
(Figure 3)

10 / EN Cooker Hood / User Manual
3 Operation of the Appliance
3.5 Operation with Flue
Connection
•Vapour is extracted
through the flue duct, which
is fastened to the connec-
tion head on the hood.
•The diameter of the flue duct must be the
same as the connection ring. In horizontal
settings, the pipe has to have a slight up-
ward slope (around 10º) so that the air can
exit the room easily.
3.6 Operation
without Flue
Connection
•Air is filtered through the carbon filter and
recirculated in the room. Carbon filter is
used when it is impossible to use a flue in
the house.
•In flueless use, remove the flaps inside the
flue adapter.
•Remove the Grease Filter . To install the
carbon filter, fit the filter to the tabs by cen-
tring it on the plastic piece on both sides of
the fan body. tighten it by turning right or
left.
•Replace aluminium Grease Filter .
Bulb
Bulb Power (W) 3
Holder / Socket E 14
Bulb Voltage (V) 220 - 240
Size (mm) 35 x 100
ILCOS Code DRBB/F-3-220-
240-E14-35/100
A
CAUTION
Disconnect the electrical supply of
the hood. Leave the lamps to cool
down first because they could burn
your hands when they are hot.
•Remove the aluminium cartridge filter. Re-
move the defective bulb and replace with
a new one with the same rating (Figure 4).
3.4 Replacement of Lamp
(Figure 4)
MAX 3 W

Cooker Hood / User Manual 11 / EN
4 Cleaning and Maintenance
C
Before cleaning and maintenance,
unplug the product or turn off the
switch.
4.1 Cleaning of Aluminium
Grease Filter
Aluminium grease filter is used to retain the
oil particles in the air. Aluminium grease filter
may change colour as it is washed; this is nor-
mal and does not require replacing your filter.
1
2
(Figure 5)
1- External Aluminium Grease Filter
2- Internal Aluminium Grease Filter
•Pull the sliding plate out by holding the
front panel. Remove the external aluminium
Grease Filter first, and then the internal al-
uminium Grease Filter .
•Push the Aluminium grease filter lock for-
ward.
•Then lower it slightly down and pull it out
(Figure 5). Otherwise, you can bend the fil-
ter. Wash and rinse Aluminium grease filter
s with liquid detergent and replace Alumin-
ium grease filter s to their sockets by by
carrying out the steps specified above in
reverse order. This filter retain the oil par-
ticles in the air.
C
You may wash your Aluminium
Grease Filter s in the dishwasher.
A
CAUTION
In case of normal use, clean your
aluminium Grease Filter once in a
month.
4.2 Replacement of Carbon
Filters
Odour removing filters contain charcoal
(Active carbon). Aluminium grease filter s
must be installed in the product, regardless of
whether or not carbon filters are used.
(Figure 6)
•Remove Aluminium grease filter (Figure 5).
•To remove the charcoal filter, remove the
charcoal filter from its housing by rotating
it counter-clockwise from the tab (Figure 6).
•Install the new charcoal filter.
•Install the aluminium Grease Filter s.
A
CAUTION
Carbon filter shall never be washed.
A
CAUTION
Replace carbon filters once every 3
months.
A
CAUTION
You can obtain the carbon filter from
the authorized services.

12 / EN Cooker Hood / User Manual
5.1 Position of the Appliance
•Distance between the cooker and the
cooker hood must be considered prior to
assembly. This distance should be 50 cm
for electric hobs and 65 cm for gas hobs.
(Figure 7).
•Distance must be measured from the sur-
face of grate for gas cookers,
•from surface of glass for electric cookers.
5.2 Installation Accessories
1. Hood
2. 4x 4 x 40 Screws
3. Operating Manual and Other
Documents
4. Mounting Template
5. Ø120mm Plastic Flue Flap
The information required to make the location
suitable for the installation of the hood is giv-
en below.
5.3 Installation of the Hood
A
CAUTION
Use protective gloves and goggles
for drilling and cutting operations.
•Paste the installing template provided with
the hood on the surface where the hood is
to be mounted.
•Make holes with Ø4 mm diameter on the
points marked as A, B, C, D on the installa-
tion template.
•Drill the flue outlet hole specified in the in-
stalling template in the sizes given.
5 Installation Of Appliance
A
WARNING!
Before starting the installation,
read the safety information on User
Manual.
A
WARNING!
Failure to install with screws and sta-
bilizers in accordance with these in-
structions may result in electric shock.
For the installation of the hood, please con-
tact the nearest Beko Authorized Service.
It is the customer's responsibility to prepare
the location and electrical installation of the
hood.
www.beko.com
Davlumbaz
Kullanma kılavuzu
TR
P 39 B
P 39 S
P 38
P 39 TI
(Figure 7)
50 cm 65 cm

Cooker Hood / User Manual 13 / EN
•Install flexible aluminium pipe to plastic flue
outlet. Install the other end of the pipe to
the flue hole on the wall (Figure 10).
5 Installation Of Appliance
Remove the appliance from its packaging.
Install the plastic flue flaps provided in the
accessories to the air outlet flue of the appli-
ance as shown below.
•Insert the plastic pin (Figure 8 / area no.
2) on the pin socket on the motor exhaust
(Figure 8 / area no.1). Then bend the flap
lightly to insert the other pin on the flap and
insert the other pin to its socket (Figure 8).
•By using the 4 x 40 screws provided with
the hood, install the appliance to the cabi-
net from the points A, B, C and D. When the
slider set moves, the front panel shall not
rub on the cabinet door (Figure 9)
B
C
D
A
A
B
C
D
(Figure 8)
(Figure 10)
(Figure 9)
1. Flap Pin Socket
2. Flap Pin
5.4 Connecting to Flue
If you are going to use the Ø 120/150 mm
plastic flue adapter, connect one end of the
pipe to this adapter, if you are not going to
use it, to the direct output on the product.
Connect the other end of the pipe to your
flue. Check that these two connections are
tight enough so they will not come out when
the appliance runs on full power. Ensure that
the flaps inside the flue work when tightened
with clamp. Connect the flue connection duct
outside the adapter. If the connection duct
is fitted inside the adapter, the covers that
prevent air return shall remain closed and air
won't be sucked in. The length of the pipe
connection as well as the number of elbows
must be as minimum as possible.
Suitable Not suitable
A : Flue exit pipe
B : Non return flaps
C: Plastic Flue
The valves are closed then the appliance is
not operating and prevent possible outside
odour and dust from entering inside.

14 / EN Cooker Hood / User Manual
6 Troubleshooting
Troubleshooting Root Cause Help
Appliance is not
working. Check your fuse. Your fuse may be off, bring it to the operating condition.
Appliance is not
working. Check the electrical connection. Mains voltage shall be be-
tween 220 and 240 V.
Appliance is not
working. Check the electrical connection. Check if other appliances available in the kitchen are
operating.
Illumination lamp
does not operate. Check the electrical connection. Mains voltage shall be be- tween 220 and 240 V.
Illumination lamp
does not operate. Inspect the lamp switch. Lamp switch shall be at "on" position.
Illumination lamp
does not operate. Inspect the lamps. The lamps of the appliance shall not be faulty.
Air intake of the
appliance is weak. Inspect the aluminium filter. Under normal operating con-
ditions, aluminium Grease
Filter shall be cleaned at
least once in a month.
Air intake of the
appliance is weak. Check the air discharge flue. Air discharge flue shall be “open”.
Air intake of the
appliance is weak. Inspect the carbon filter. For the appliances with carbon filters, this filter shall
be replaced once in every
3 months under normal
conditions.

www.beko.com
Arçelik A.Ş. Karaağaç Caddesi No:2-6,
34445, Sütlüce / İSTANBUL