Beko BHCB93640B User manual

BHCB 93640 B
EN
01M-9201513200-0722-12
User Manual
Cooker Hood

2 / EN Cooker Hood / User Manual
CONTENTS
1 Important safety and
environmental instructions 4
1.1 General safety . . . . . . . . . . . . . . . . . . . . 4
1.2 Compliance with the WEEE Directive and
Disposing of the Waste Product:. . . . . . . . . . . 7
1.3 Compliance with RoHS Directive . . . . . . . 7
1.4 Package Information . . . . . . . . . . . . . . . . 7
2 General appearance 8
2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2 Technical data. . . . . . . . . . . . . . . . . . . . . 8
3 Operation of the appliance 9
3.1 Controlling the Appliance. . . . . . . . . . . . . 9
3.2 Energy efficient usage. . . . . . . . . . . . . . . 9
3.3 Operating the hood . . . . . . . . . . . . . . . . . 9
3.4 Automatic stop . . . . . . . . . . . . . . . . . . . . 9
3.5 Replacement of Lamp . . . . . . . . . . . . . . . 9
3.6 Operation with chimney connection . . . 10
3.7 Operation without chimney connection . . 10
4 Cleaing and maintenance 11
4.1 Cleaning of grease filter. . . . . . . . . . . . . 11
4.2 Replacement of Carbon Filters . . . . . . . 11
5 Installation of appliance 12
5.1 Position of the Appliance . . . . . . . . . . . . 12
5.2 Installation Accessories . . . . . . . . . . . . . 12
5.3 Wall Mounting. . . . . . . . . . . . . . . . . . . . 13
5.4 Connecting to Chimney . . . . . . . . . . . . 14
5.5 Installation of the Hood to the Chimney 14
6 Troubleshooting 15

Please read this user manual first!
Dear Valued Customer,
Thank you for preferring this Beko appliance. We hope that you get the best results
from your appliance which has been manufactured with high quality and state-of-
the-art technology. For this reason, please read this entire user manual and all other
accompanying documents carefully before using the appliance and keep it as a
reference for future use. If you handover the appliance to someone else, give the user
manual as well. Follow the instructions by paying attention to all the information and
warnings in the user manual.
Remember that this user manual may also apply to other models. Differences between
models are explicitly described in the manual.
Meanings of the Symbols
Following symbols are used in various sections of this user manual:
CImportant information and useful hints about
usage.
AWARNING: Warnings against dangerous situa-
tions concerning the security of life and property.
WARNING: Warning for danger of fire.
BWARNING: Warning for electric shock.
This appliance has been produced in environmentally friendly facilities without harming the nature.

4 / EN Cooker Hood / User Manual
1 Important safety and environmental instructions
1.1 General safety
Important Safety Instructions Read
Carefully And Keep For Future
Reference This section contains
safety instructions that will help
protect from risk of fire, electric
shock, exposure to leak micro-
wave energy, personal injury or
property damage. Failure to follow
these instructions shall void any
warranty.
•Beko products comply with the
applicable safety standards;
therefore, in case of any damage
on the appliance or power cable,
it should be repaired or replaced
by the dealer, service center or a
specialist and authorized service
alike to avoid any danger. Faulty
or unqualified repair work may
be dangerous and cause risk to
the user.
•This appliance is intended to be
used in household and similar
applications such as:
– Staff kitchen areas in shops,
offices and other working en-
vironments;
– Farm houses
– By clients in hotels, and other
residential type environments;
– Bed and Breakfast type envi-
ronments.
•Operate the appliance for its
intended purpose only as de-
scribed in this manual.
•The manufacturer cannot be held
liable for damages resulting from
improper installation or misuse of
the product.
•This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental ca-
pabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand the
hazards involved.
•Children shall not be allowed
play with the appliance. Cleaning
and user maintenance shall not
be made by children without su-
pervision.

Cooker Hood / User Manual 5 / EN
1 Important safety and environmental instructions
•The minimum distance between
the supporting surface for the
cooking vessels on the hob and
the lowest part of your product
must be at least 65 cm.
•If the instructions for installation
for the gas hob specify a greater
distance, this has to be taken
into account.
•Make sure that your mains
power supply complies with the
information supplied on the rat-
ing plate of the appliance.
•Never use the appliance if the
power cable or the appliance it-
self is damaged.
•Prevent damage to the power
cable by not squeezing, bending,
or rubbing it on sharp edges.
Keep the power cable away from
hot surfaces and naked flame.
•Use the appliance with a
grounded outlet only.
WARNING: Do not connect the
appliance to the mains until the
installation is fully complete.
•Place the appliance in a way so
that the plug is always accessible.
•Do not touch the lamps if they
have operated for a long time.
They can burn your hands since
they will be hot.
•Follow the regulations set out by
competent authorities on dis-
charge of the exhaust air (this
warning is not applicable for use
without flue).
•Operate your appliance after put-
ting a pot, pan etc. on the hob.
Otherwise, high heat may cause
deformation in some parts of
your product.
•Turn off the hob before taking the
pot, pan etc. from it.
•Do not leave hot oil on the hob.
Pans with hot oil may cause self
combustion.
•Pay attention to your curtains
and covers since oil may catch
fire while cooking food such as
fries.
•Grease filter must be cleaned
at least monthly. Carbon filter
must be replaced at least every
3 months.

6 / EN Cooker Hood / User Manual
1 Important safety and environmental instructions
•Product shall be cleaned ac-
cordance with user manual. If
cleaning was not carried out in
accordance with user manual,
there may be fire risk.
•Do not use non-fire-resistant
filtering materials instead of the
current filter.
•Only use the original parts or
parts recommended by the man-
ufacturer.
•Do not operate the product with-
out the filter and do not remove
the filters while the product is
running.
•In the event of be started any
flame, de-energize your product
and cooking appliances.
•In the event of be started any
flame, cover the flame and never
use water to extinguish.
•Unplug the appliance before
each cleaning and when the ap-
pliance is not in use.
•The negative pressure in the envi-
ronment should not exceed 4 Pa
(4x10 bar) while the hood for elec-
tric hob and appliances running on
another type of energy but electric-
ity operate simultaneously.
•In the environment where the
appliance is being used, the ex-
haust of devices running on fuel
oil or gas, such as room heater
must be absolutely isolated or
device must be hermetical type.
•When connecting the flue, use
pipes with a diameter of 120 or
150 mm. Pipe connection must
be as short as possible and have
as few elbows as possible.
•Danger of choking! Keep all the
packaging materials away from
children.
CAUTION: Accessible parts may
become hot when used with cook-
ing appliances.
•The product outlet must not be
connected to air channels that
include other smoke.
•The ventilation in the room may
be insufficient when the hood for
electric hob is used simultane-
ously with the devices operating
on gas or other fuels (this may
not apply to appliances that only
discharge the air back into the
room).

Cooker Hood / User Manual 7 / EN
1 Important safety and environmental instructions
•Objects placed on the product
may fall. Do not place any ob-
jects on the product.
•Do not flambe under the your
product.
WARNING: Before installing the
Hood, remove the protective films.
•Never leave high naked flames
under the hood when it is in op-
eration
•Deep fat fryers must be contin-
uously monitored during use:
overheated oil can burst into
flames.
1.2 Compliance with the WEEE
Directive and Disposing of the Waste
Product:
This product complies with EU WEEE Directive
(2012/19/EU). This product bears a classification
symbol for waste electrical and electronic equip-
ment (WEEE).
This symbol indicates that this product
shall not be disposed with other
household wastes at the end of its ser-
vice life. Used device must be returned
to offical collection point for recycling
of electrical and electronic devices. To find these
collection systems please contact to your local au-
thorities or retailer where the product was pu-
chased. Each household performs important role
in recovering and recycling of old appliance.
Appropriate disposal of used appliance helps pre-
vent potential negative consequences for the envi-
ronment and human health.
1.3 Compliance with RoHS Directive
The product you have purchased complies with EU
RoHS Directive (2011/65/EU). It does not contain
harmful and prohibited materials specified in the
Directive.
1.4 Package Information
Packaging materials of the product are
manufactured from recyclable materials
in accordance with our National
Environment Regulations. Do not dis-
pose of the packaging materials together with the
domestic or other wastes. Take them to the pack-
aging material collection points designated by the
local authorities.

8 / EN Cooker Hood / User Manual
1. Inner chimney
2. Outer chimney
3. Control panel
4. Grease filter
5. Lighting
2.2 Technical data
Model BHCB 93640 B
Supply voltage & Frequency 220-240V ~ 50 Hz
Lamp power 2 x 3 W
Motor power 210 W
Flow rate – 3. Level 645 m³/h
Insulation class of motor Class F
Insulation class Class I
(Figure 2)
(Figure 1)
2 General appearance
2.1 Overview
504
898
53
n643 Max 1023
590
20
380
261
250
80 25

Cooker Hood / User Manual 9 / EN
3.1 Controlling the Appliance
KEY FUNCTION
A : Light On
/ Off
You may illuminate the cooking
area by pressing this button. Re-
press the button to turn off the
lamp.
B : 1. Stage
Button
Operates the appliance on 1st
speed. When you press this button
again to turn off the appliance, the
screen speed stage turns off.
C : 2. Stage
Button
Operates the appliance on 2nd
speed. When you press this button
again to turn off the appliance, the
screen speed stage turns off.
D : 3rd Stage
Button
Operates the appliance on 3rd
speed. When you press this button
again to turn off the appliance, the
screen speed stage turns off.
3.2 Energy efficient usage
•When using your appliance, adjust the speed
settings according to vapour and odour intensity,
in order to save energy.
•Use low speeds (1-2) under normal conditions,
and high speed (3) for intense odour and vapour.
•The lamps on the hood are placed for illuminat-
ing the cooking area.
•Using them for environmental lighting shall
cause unnecessary energy expenditure and in-
sufficient lighting.
3.3 Operating the hood
•Your appliance contains a motor that has various
speeds.
•For better performance, we recommend using low
speeds under normal conditions and high speeds
in cases of strong odours and intense vapour.
3 Operation of the appliance
•You can start your appliance by pressing on the
desired speed setting button. (B, C, D)
•You may illuminate the cooking area by pressing
the lamp (A).
3.4 Automatic stop
Your appliance has Automatic Stop feature, ena-
bling it to ventilate for a bit more and remove the
unwanted odours and vapour inside the environ-
ment and turn off automatically after the cooking
is done. To enable Automatic Stop feature, press
the any speed stage button (B, C, D) on the control
panel for longer than 2 seconds; the 15-minute
timer function shall be activated. When the au-
tomatic stop feature is active, pressing the same
speed button shall disable the automatic stop
function and the appliance's motor shall stop. This
feature is disables when you switch between dif-
ferent speed stages. If you want the appliance to
stop automatically, you need to enable the auto-
matic stop feature again.
3.5 Replacement of Lamp
MAX 3 W
(Figure 3)
Make the electrical connections of the appliance.
Your appliance uses 3W spot LED lamp. For re-
placing the lamps, push downwards on the holder
from its behind, turn it counter-clockwise, and take
it out downwards.

10 / EN Cooker Hood / User Manual
Apply the above operation in reverse to install new
lamps (Figure 3).
Bulb
Bulb Power 3 W
Holder / Socket GZ 10
Bulb Voltage 220 - 240 V
Size 53 x 50 mm
ILCOS Code DR/F3-220-240-GZ10-50-53
Luminous flux 260 lm
Correlated
colour tempera-
ture
3000 K
This product contains a light source of energy ef-
ficiency class “F”.
3.6 Operation with chimney
connection
•Vapour is extracted through the
flue duct, which is fastened to
the connection head on the
hood.
•The diameter of the flue duct must be the same
as the connection ring. In horizontal settings, the
pipe has to have a slight upward slope (around
10º) so that the air can exit the room easily.
3.7 Operation without chimney
connection
•Air is filtered through the carbon
filter and recirculated in the
room. Carbon filter is used
when it is impossible to use a
flue in the house.
•In flueless use, remove the flaps inside the flue
adapter.
•Remove the aluminum grease filter. To install the
carbon filter, fit the filter to the tabs by centring
it on the plastic piece on both sides of the fan
body. tighten it by turning right or left.
•Replace aluminum grease filter.
3 Operation of the appliance

Cooker Hood / User Manual 11 / EN
CBefore cleaning and maintenance,
unplug the product or turn off the
switch.
4.1 Cleaning of grease filter
Grease filter is used to retain the oil particles in the
air. Grease filter may change colour after repeated
cleaning. This is normal, and you do not have to
replace your filters.
(Figure 4)
•Push the grease filter lock forward.
•Then pull it slightly down and pull it out (Figure
4). Otherwise, you may bend the filter. Wash and
rinse grease filter with liquid detergent and re-
place grease filter to their seats by carrying out
the steps specified above in reverse order. These
grease filter are used to retain the oil particles
in the air.
CYou may also wash the grease filter
in the washing machine.
ACAUTION: In case of normal use,
clean your grease filter once in a
month.
4.2 Replacement of Carbon Filters
(Figure 5)
•The appliance you have purchased is appropri-
ate for use with carbon filters.
•Remove the grease filter (Figure 4).
•Place the lower part of the carbon filter to the
motor cabinet (Figure 5).
•Press on the tab of the carbon filter and push it
forward, and ensure that the tabs of carbon filter
are engaged and locked. (Figure 5).
•Attach the grease filter.
A
CAUTION
•Carbon filter shall never be
washed.
•Replace carbon filters once every
3 months.
•You can obtain the carbon filter
from the authorized services.
4Cleaing and maintenance

12 / EN Cooker Hood / User Manual
AWARNING: Before starting the in-
stallation, read the safety informa-
tion on User Manual.
BWARNING: Failure to install with
screws and stabilizers in accordance
with these instructions may result in
electric shock.
For the installation of the hood, please contact the
nearest Authorized Service.
It is the customer's responsibility to prepare the
location and electrical installation of the hood.
5.1 Position of the Appliance
(Figure 6)
•Distance between the cooker and the cooker
hood must be considered prior to assembly. This
distance should be 65 cm (Figure 6).
•Distance must be measured from the surface of
grate for gas cookers,
•from surface of glass for electric cookers.
5.2 Installation Accessories
Hood
Usermanual
EN
BHCB93640B
01M-9201513200-5021-11
1. Product
2. Inner Chimney
3. Outer Chimney
4. Ø150/120 mm Plastic Flue Adapter
5. Chimney Connection Plate
6. User Manual
7. Assembly Pattern
8. 2x Hanging Plates
9. 2x Ø6mm Plastic Dowel
10.4x Ø10mm Plastic Dowel
11. 4x 5.5x60 Wall Mount Screw
12. 2x M5x35 Hanging Plate Connection Screw
13. 2x 3.9x22 Chimney Connection Plate Screw
14. 2x M4 Washer
15. 2x 3.5x9.5 Chimney Connection Plate Screw
16. Chimney Clamp
The information required to make the location suit-
able for the installation of the hood is given below.
5Installation of appliance

Cooker Hood / User Manual 13 / EN
To install the hood body, drill points C, D, E, F spec-
ified in the installation template with a Ø10mm
drill bit and tap Ø10mm plastic dowels to these
points (Figure 8).
Install 2 pieces of 5.5x60 mounting screws to
points C and D with a clearance of 5 mm between
the screw head and the wall (Figure 8).
(Figure 8)
Install two pieces of hanging plates to the body of
the hood with M5x35 mounting screws (Figure 8).
(Figure 9)
Hold the cooker hood by its body and place it on
the mounting screws on the wall and tighten the
screws (Figure 9).
Install M4 washers to the 5.5x60 suspension
screws. Secure the cooker hood with a 5.5x60
screw to the wall through the mounting hole on
the interior of the appliance (Figure 9).
5.3 Wall Mounting
•Wall must be flat, straight and have the suffi-
cient bearing capacity.
•Depth of drilling holes must comply with the
length of bolts.
•The bolts and dowels provided are suitable for
brick walls. For other construction material (e.g.
drywall, plate, porous concrete), suitable fixing
dowels and nuts shall be used.
4x
Ø10mm
F
(Figure 7)
ACAUTION: Before drilling, ensure
that there are no power, gas or wa-
ter pipes in the close proximity of the
drilling locations.
Draw a mid location line from the ceiling perpen-
dicular to the lower edge of the hood.
Fix the assembly scheme on the wall. For points
A and B, take the maximum dimensions of the
hood as reference, and drill points A and B you
have marked with a Ø6mm drill bit, and tap Ø6mm
plastic wall plugs. Install the chimney connection
plate to the wall with 2 pieces of 3.9x22 screws
(Figure 8).
5Installation of appliance

14 / EN Cooker Hood / User Manual
5.4 Connecting to Chimney
If you are going to use the Ø 120/150 mm plastic
Chimney adapter, connect one end of the pipe to
this adapter, if you are not going to use it, to the di-
rect output on the product. Connect the other end
of the pipe to your Chimney . Check that these two
connections are tight enough so they will not come
out when the appliance runs on full power. Check
if the flaps inside the Chimney operate when they
are tightened with clamps. Connect the Chimney
connection duct outside the adapter (Figure 11/a).
If the connection duct is fitted inside the adapter,
suction of air shall not occur as the Chimney flap
that prevents the return of air will remain closed
(Figure 11 / b). The length of the pipe connection
as well as the number of elbows must be as min-
imum as possible.
A : Chimney exit pipe
B : Non return flaps
C: Plastic flue
The valves are closed then the appliance is not
operating and prevent possible outside odour and
dust from entering inside.
(Figure 10)
5Installation of appliance
Ok Not Ok
(a) (b)
(Figure 11)
5.5 Installation of the Hood to the
Chimney
Make the electrical connection of your hood before
starting the installation of the Chimney . Slip the
Chimney plates around the body.
Install the Chimney plate to the Chimney fasten-
ing plate that is secured to the wall from its upper
outer edges (Figure 12).
(Figure 12)
1. Inner Chimney
2. 3.5x9.5 Screw
3. Chimney Connection Plate

Cooker Hood / User Manual 15 / EN
6Troubleshooting
Troubleshooting Root cause Help
Appliance is not working. Check your fuses. Fuse may be blown, inspect and restore it.
Appliance is not working. Check the electrical connection. Mains voltage shall be between 220 and 240 V.
Appliance is not working. Check the electrical connection. Check if other appliance in your kitchen
operate.
Illumination light does
not operate.
Check the electrical connection. Mains voltage shall be between 220 and 240 V.
Illumination light does
not operate.
Inspect the lamp switch. Lamp switch shall be at “on” position.
Illumination light does
not operate.
Inspect the lamps. The lamps of the appliance shall illuminate.
Air inlet of the appliance
is inadequate.
Inspect the grease filter. Under normal operating conditions, grease filter
shall be cleaned at least once in a month.
Air inlet of the appliance
is inadequate.
Check the air discharge chimney. The air discharge chimney shall be at “on” po-
sition.
Air inlet of the appliance
is inadequate.
Inspect the carbon filter. The filters of the appliances with carbon filters
shall be replaced once in every 3 months under
normal conditions.

Arçelik A.Ş.
Karaağaç Caddesi No: 2-6, 34445,
Sütlüce, İstanbul, Türkiye
www.beko.com