Beko HNT61320XHS User manual

HNT61320XHS
EN
01M-8897683200-3222-07
User Manual
Cooker Hood

2 / EN Cooker Hood / User Manual
CONTENTS
1 Important safety and
environmental instructions 4
1.1 General Safety ....................................4
1.2 Compliance with the WEEE Directive
and Disposing of the Waste Product:...7
1.3 Compliance with RoHS Directive....8
1.4 Package Information.........................8
2 General appearance 9
2.1 Overview ..............................................9
2.2 Technical data ....................................9
3 Operation of the appliance 10
3.1 Controlling the appliance............... 10
3.2 Efficient use in terms of energy
saving....................................................... 10
3.3 Operating the hood......................... 10
3.4 Replacement of Lamp ................... 10
3.5 Operation with flue connection ... 11
3.6 Operation without flue connection11
4 Cleaning and maintenance 12
4.1 Cleaning of grease filter................. 12
4.2 Replacement of carbon filters ..... 12
5 Installation of appliance 14
5.1 Position of the appliance............... 14
5.2 Installation of the hood.................. 14
5.3 Storage.............................................. 14
5.4 Handling and transportation......... 14
6 Troubleshooting 15

Please read this user manual first!
Dear Valued Customer,
Thank you for preferring this Beko appliance. We hope that you get the
best results from your appliance which has been manufactured with
high quality and state-of-the-art technology. For this reason, please
read this entire user manual and all other accompanying documents
carefully before using the appliance and keep it as a reference for
future use. If you handover the appliance to someone else, give the
user manual as well. Follow the instructions by paying attention to all
the information and warnings in the user manual.
Remember that this user manual may also apply to other models.
Differences between models are explicitly described in the manual.
Meanings of the Symbols
Following symbols are used in various sections of this user manual:
CImportant information and useful hints
about usage.
AWARNING: Warnings against dangerous
situations concerning the security of
life and property.
WARNING: Warning for danger of fire.
BWARNING: Warning for electric shock.

4 / EN Cooker Hood / User Manual
1.1 General Safety
Important Safety
Instructions Read Carefully
And Keep For Future
Reference This section con-
tains safety instructions
that will help protect from
risk of fire, electric shock,
exposure to leak microwa-
ve energy, personal injury
or property damage. Failure
to follow these instructions
shall void any warranty.
•Beko products comply
with the applicable safety
standards; therefore, in
case of any damage on
the appliance or power
cable, it should be repaired
or replaced by the dealer,
service center or a specia-
list and authorized service
alike to avoid any danger.
Faulty or unqualified repair
work may be dangerous
and cause risk to the user.
•This appliance is intended
to be used in household
and similar applications
such as:
–Staff kitchen areas in
shops, offices and other
working environments;
–Farm houses
–By clients in hotels, and
other residential type
environments;
–Bed and Breakfast type
environments.
•Operate the appliance for
its intended purpose only
as described in this manual.
•The manufacturer cannot
be held liable for damages
resulting from improper
installation or misuse of
the product.
•This appliance can be
used by children aged
from 8 years and above
and persons with reduced
physical, sensory or men-
tal capabilities or lack of
experience and knowledge
if they have been given su-
pervision or instruction
concerning use of the app-
liance in a safe way and
understand the hazards
1 Important safety and environmental instructions

Cooker Hood / User Manual 5 / EN
involved.
•Children shall not be allo-
wed play with the appli-
ance. Cleaning and user
maintenance shall not be
made by children without
supervision.
•The minimum distance
between the supporting
surface for the cooking
vessels on the hob and the
lowest part of your product
must be at least 65 cm.
•If the instructions for ins-
tallation for the gas hob
specify a greater distance,
this has to be taken into
account.
•Make sure that your mains
power supply complies
with the information supp-
lied on the rating plate of
the appliance.
•Never use the appliance if
the power cable or the app-
liance itself is damaged.
•Prevent damage to the
power cable by not squee-
zing, bending, or rubbing it
on sharp edges. Keep the
power cable away from hot
surfaces and naked flame.
•Use the appliance with a
grounded outlet only.
WARNING: Do not connect
the appliance to the mains
until the installation is fully
complete.
•Place the appliance in a way
so that the plug is always
accessible.
•Do not touch the lamps if
they have operated for a
long time. They can burn
your hands since they will
be hot.
•Follow the regulations set
out by competent autho-
rities on discharge of the
exhaust air (this warning
is not applicable for use
without flue).
•Operate your appliance
after putting a pot, pan
etc. on the hob. Otherwise,
high heat may cause de-
formation in some parts
of your product.
1 Important safety and environmental instructions

6 / EN Cooker Hood / User Manual
•Turn off the hob before ta-
king the pot, pan etc. from it.
•Do not leave hot oil on the
hob. Pans with hot oil may
cause self combustion.
•Pay attention to your cur-
tains and covers since oil
may catch fire while coo-
king food such as fries.
•Grease filter must be clea-
ned at least monthly. Car-
bon filter must be replaced
at least every 3 months.
•Product shall be cleaned
accordance with user ma-
nual. If cleaning was not
carried out in accordance
with user manual, there
may be fire risk.
•Do not use non-fire-
resistant filtering materials
instead of the current filter.
•Only use the original parts
or parts recommended by
the manufacturer.
•Do not operate the product
without the filter and do
not remove the filters while
the product is running.
•In the event of be started
any flame, de-energize
your product and cooking
appliances.
•In the event of be started
any flame, cover the flame
and never use water to ex-
tinguish.
•Unplug the appliance be-
fore each cleaning and
when the appliance is not
in use.
•The negative pressure in the
environment should not ex-
ceed 4 Pa (4x10 bar) while
the hood for electric hob
and appliances running on
another type of energy but
electricity operate simulta-
neously.
•In the environment where
the appliance is being
used, the exhaust of devi-
ces running on fuel oil or
gas, such as room heater
must be absolutely isola-
ted or device must be her-
metical type.
•When connecting the flue,
use pipes with a diameter
1 Important safety and environmental instructions

Cooker Hood / User Manual 7 / EN
of 120 or 150 mm. Pipe
connection must be as
short as possible and have
as few elbows as possible.
•Danger of choking! Keep
all the packaging materi-
als away from children.
CAUTION: Accessible parts
may become hot when used
with cooking appliances.
•The product outlet must
not be connected to air
channels that include
other smoke.
•The ventilation in the room
may be insufficient when
the hood for electric hob
is used simultaneously
with the devices operating
on gas or other fuels (this
may not apply to applian-
ces that only discharge the
air back into the room).
•Objects placed on the pro-
duct may fall. Do not place
any objects on the pro-
duct.
•Do not flambe under the
your product.
WARNING: Before installing
the Hood, remove the pro-
tective films.
•Never leave high naked fla-
mes under the hood when
it is in operation
•Deep fat fryers must be
continuously monitored
during use: overheated oil
can burst into flames.
1.2 Compliance with the WEEE
Directive and Disposing of the
Waste Product:
This product complies with EU WEEE
Directive (2012/19/EU). This product
bears a classification symbol for was-
te electrical and electronic equipment
(WEEE).
This symbol indicates that this
product shall not be disposed
with other household wastes at
the end of its service life. Used
device must be returned to offi-
cal collection point for recycling of elect-
rical and electronic devices. To find these
collection systems please contact to
your local authorities or retailer where
the product was puchased. Each house-
hold performs important role in recove-
ring and recycling of old appliance.
Appropriate disposal of used appliance
helps prevent potential negative conse-
quences for the environment and human
health.
1 Important safety and environmental instructions

8 / EN Cooker Hood / User Manual
1.3 Compliance with RoHS
Directive
The product you have purchased compli-
es with EU RoHS Directive (2011/65/EU).
It does not contain harmful and prohibi-
ted materials specified in the Directive.
1.4 Package Information
Packaging materials of the pro-
duct are manufactured from
recyclable materials in accor-
dance with our National
Environment Regulations. Do not dispo-
se of the packaging materials together
with the domestic or other wastes. Take
them to the packaging material collecti-
on points designated by the local autho-
rities.
1 Important safety and environmental instructions

Cooker Hood / User Manual 9 / EN
Control and parts
1. Sliding panel
2. Control panel
3. Grease filter
4. Lighting
2.2 Technical data
Model HNT61320XHS
Supply voltage 220V~ 60Hz
Lamp power 2 x 2 W
Motor power 150 W
Total power 154 W
Flow rate – 3. Level 317 m³/h
Insulation Class of Motor Class F
Insulation Class Class I
2.1 Overview
2 General appearance

10 / EN Cooker Hood / User Manual
3.1 Controlling the appliance
A B C D E
KEY FUNCTION
A : Low Button Push the low button, and
the motor will run at low
speed.
B : High Button Push the high button, and
the motor will run at high
speed.
C : Lamp Button Push the light button and
the two lights will illumina-
te. Push it again and the
light will turn on-off.
D : OFF Button Push the stop button, and
the motor will stop.
E : Automatic
Button
Push the Automatic but-
ton, and the motor will run
at Automatic speed.
3.2 Efficient use in terms of
energy saving
•When using your appliance, adjust the
speed settings according to vapour and
odour intensity, in order to save energy.
•Use low speeds (1) under normal con-
ditions, and high speed (2) and boost
mode for intense odour and vapour.
•The hood is equipped with lamps in
order to illuminate the cooking area.
•Using them for environmental lighting
shall cause unnecessary energy expen-
diture and insufficient lighting.
•For your device to consume less
energy, run it at a low speed level.
•Your device will reduce energy con-
sumption as it will run more efficiently
when you provide sufficient air intake
to it.
•Set your device to the intense suction
power level before the formation of
steam, in cases where you know that
the dense steam will occur. So, you
reduce energy consumption by using
your device for a shorter time as it will
have a sufficient air intake.
•Keep the lids of the cookware closed to
reduce the steam evolving.
3.3 Operating the hood
•Your appliance contains a motor that
has various speeds.
•For better performance, we recom-
mend using low speeds under normal
conditions and high speeds in cases of
strong odours and intense vapour.
•You can start your appliance by pres-
sing on the desired speed setting but-
ton. (A, B,D)
•You may illuminate the cooking area by
pressing the lamp (C).
3.4 Replacement of Lamp
3 Operation of the appliance

Cooker Hood / User Manual 11 / EN
Make the electrical connections of
the appliance. Your appliance uses
2X2 W spot LED lamp. For replacing
the lamps, push downwards on the
holder from its behind, turn it coun-
ter-clockwise, and take it out down-
wards. Apply the above operation in
reverse to install new lamps.
Bulb
Bulb Power 2X2 W
Holder / Socket E14
Bulb Voltage 220-240V~ 50-60Hz
Size 25 x90 mm
A
•Before replacing the light
bulbs, disconnect the power
supply of the hood.
•Do not touch the light bulbs
when they are hot.
•Be careful not to touch the
replaced light bulb directly
with hands.
CYou may procure lamps from
Authorised Service Agents.
3.5 Operation with flue
connection
•Vapour is extracted thro-
ugh the flue duct, which
is fastened to the con-
nection head on the
hood.
•The diameter of the flue duct must be
the same as the connection ring. In ho-
rizontal settings, the pipe has to have
3 Operation of the appliance
a slight upward slope (around 10º) so
that the air can exit the room easily.
3.6 Operation without flue
connection
•Air is filtered through the
carbon filter and recircu-
lated in the room. Carbon
filter is used when it is im-
possible to use a flue in
the house.
•In flueless use, remove the flaps inside
the flue adapter.
•Remove the oil filter. To install the car-
bon filter, fit the filter to the tabs by
centring it on the plastic piece on both
sides of the fan body. Tighten it by tur-
ning right or left.
•Replace aluminium oil filter.

12 / EN Cooker Hood / User Manual
The device should be cleaned and main-
tained regularly. Failure to keep the devi-
ce clean will adversely affect the service
life of the device.For cleaning and main-
tenance, follow the instructions stated in
the manual.
CBefore cleaning and mainte-
nance, unplug the product or
turn off the switch.
Non-compliance with the pro-
visions associated with the
cleaning of the device and
replacement of the filters
may result in a risk of fire.
Therefore, it is recommended
to follow the guidelines sta-
ted here. The manufacturer is
not responsible for the engine
damages or fires originating
from the improper use.
Clean using only a cloth dampened with
neutral liquid detergent. Do not clean
with tools or instruments. Do not use ab-
rasive products. Do not use alcohol.
4.1 Cleaning of grease filter
This filter captures oil particles in the air.
You are recommended to clean your fil-
ter every month under normal usage con-
ditions. First remove the grease filters for
this process. Wash the filters with liqu-
id detergent and rinse them with water
and install them back after they get dry.
Grease filters may get discolered as they
are washed; this is normal and you don’t
need to change your filter.
1
2
1.External aluminium grease filter
2.Internal aluminium grease filter
•Pull the sliding plate out by holding the
front panel. Remove the external alu-
minium grease filter first, and then the
internal aluminium grease filter .
•Push the aluminium grease filter lock
forward.
•Then lower it slightly down and pull it
out. Otherwise, you can bend the filter.
Wash and rinse aluminium grease filter
s with liquid detergent and replace alu-
minium grease filter s to their sockets
by by carrying out the steps specified
above in reverse order. This filter retain
the particles in the air.
CYou may also wash the alu-
minum grease filter in the
dishwasher.
ACAUTION: In case of normal
use, clean your aluminum
grease filter once in a month.
4.2 Replacement of carbon filters
Odour removing filters contain charcoal
(Active carbon). Aluminium grease filters
must be installed in the product, regard-
less of whether or not carbon filters are
used.
4 Cleaning and maintenance

Cooker Hood / User Manual 13 / EN
4 Cleaning and maintenance
•Remove aluminium grease filter.
•To remove the charcoal filter, remove
the charcoal filter from its housing by
rotating it counter-clockwise from the
tab.
•Install the new charcoal filter.
•Install the aluminium grease filters.
A
CAUTION:
•Carbon filter shall never be
washed.
•Replace carbon filters once
every 3 months.
•You can obtain the carbon
filter from the authorized
services.

14 / EN Cooker Hood / User Manual
5 Installation of appliance
AWARNING: Before starting the
installation, read the safety
information on user manual.
B
WARNING: Failure to install
with screws and stabilizers
in accordance with these ins-
tructions may result in elect-
ric shock.
For the installation of the hood, please
contact the nearest Authorized Service.
It is the customer’s responsibility to pre-
pare the location and electrical installati-
on of the hood.
5.1 Position of the appliance
•Distance between the cooker and the
cooker hood must be considered prior
to assembly. This distance should be
65 cm.
•Distance must be measured from the
surface of grate for gas cookers,
•from surface of glass for electric coo-
kers.
5.2 Installation of the hood
ACAUTION: Use protective glo-
ves and goggles for drilling
and cutting operations.
•When the extractor is working at the
same time as other non-electrical coo-
king equipment, the outlet air pressure
must not exceed 4 Pa.
•To achieve optimum performance the
length of the outlet hose should not
exceed 4 meters, or include more than
two 90 angles (elbows)
•If venting to the outside, should not ins-
tall the activated carbon filters with the
unit.
5.3 Storage
•If you do not intend to use the appli-
ance for a long time, store it carefully.
•Before lifting the appliance unplug it
and then let it cool completely.
•Keep the appliance and its accessories
in their original packages.
•Store it in a cool, dry place.
•Always keep the appliance out of the
reach of children.
5.4 Handling and transportation
•During handling and transportation,
carry the appliance in its original pac-
kaging. The packaging of the appliance
protects it against physical damages.

Cooker Hood / User Manual 15 / EN
5 Installation of appliance
6Troubleshooting
Troubleshooting Root cause Help
Appliance is not
working. Check your fuses. Fuse may be blown, inspect and res- tore it.
Appliance is not
working. Check the electrical con- nection. Mains voltage shall be between 220 and 240 V.
Appliance is not
working. Check the electrical con- nection. Check if other appliance in your kitchen operate.
Illumination light
does not operate. Check the electrical con- nection. Mains voltage shall be between 220 and 240 V.
Illumination light
does not operate. Inspect the lamp switch. Lamp switch shall be at “on” position.
Illumination light
does not operate. Inspect the lamps. The lamps of the appliance shall illu- minate.
Air inlet of the appli-
ance is inadequate. Inspect the aluminium fil- ter. Under normal operating conditions, aluminum grease filter shall be clea-
ned at least once in a month.
Air inlet of the appli-
ance is inadequate. Check the air discharge chimney. The air discharge chimney shall be at “on” position.
Air inlet of the appli-
ance is inadequate. Inspect the carbon filter. The filters of the appliances with car- bon filters shall be replaced once in
every 3 months under normal condi-
tions.
•Do not place heavy loads on the appli-
ance or the packaging. The appliance
may be damaged.
•Dropping the appliance will render it
non-operational or cause permanent
damage.

Arçelik A.Ş.
Karaağaç Caddesi No: 2-6, 34445,
Sütlüce, İstanbul, Türkiye
www.beko.com