
13 EN
Starting the programme
PressStart/Pausebuttontostarttheprogramme.
Programmefollow-uplightshowingthestartupof
the programme will turn on.
C Ifnoprogrammeisstartedornokeyis
pressed within 1 minute during programme
selection process, the machine will switch
to Pause mode and the illumination level of
the temperature, speed and loading door
indicatorlightswilldecrease.Otherindicator
lightsandindicatorswillturnoff.Oncethe
ProgrammeSelectionknobisrotatedor
anybuttonispressed,indicatorlightsand
indicators will turn on again.
Child Lock
UseChildLockfunctiontopreventchildrenfrom
tampering with the machine. Thus you can avoid
any changes in a running programme.
C IftheProgrammeSelectionknobisturned
when the Child Lock is active, "Con" appears
on the display. The Child Lock does not
allow any change in the programmes and the
selected temperature, speed and auxiliary
functions.
CEven if another programme is selected with
theProgrammeSelectionknobwhiletheChild
Lock is active, previously selected programme
will continue running.
To activate the Child Lock:
Press and hold 1st and 2nd Auxiliary Function
buttonsfor3seconds.Thelightsonthe1st and
2ndAuxiliaryFunctionbuttonswillflash,and
"C03", "C02", "C01" will appear on the display
respectivelywhileyoukeepthebuttonspressed
for 3 seconds. Then, "Con" will appear on the
display indicating that the Child Lock is activated.
IfyoupressanybuttonorturntheProgramme
SelectionknobwhentheChildLockisactive,
same phrase will appear on the display. The lights
onthe1stand2ndauxiliaryfunctionbuttonsthat
areusedtodeactivatetheChildLockwillblink3
times.
To deactivate the Child Lock:
Press and hold 1st and 2nd auxiliary function
buttonsfor3secondswhileanyprogrammeis
running. The lights on the 1st and 2nd Auxiliary
Functionbuttonswillflash,and"C03","C02",
"C01" will appear on the display respectively while
youkeepthebuttonspressedfor3seconds.
Then,"COFF"willappearonthedisplayindicating
that the Child Lock is deactivated.
C Inadditiontothemethodabove,todeactivate
the Child Lock, switch the Programme
SelectionknobtoOn/Offpositionwhenno
programme is running, and select another
programme.
CChild Lock is not deactivated after power
failures or when the machine is unplugged.
Progress of programme
Progressofarunningprogrammecanbefollowed
fromtheProgrammeFollow-upindicator.At
thebeginningofeveryprogrammestep,the
relevant indicator light will turn on and light of the
completed step will turn off.
You can change the auxiliary functions, speed
and temperature settings without stopping the
programme flow while the programme is running.
To do this, the change you are going to make must
beinastepaftertherunningprogrammestep.If
thechangeisnotcompatible,relevantlightswill
flash for 3 times.
C Ifthemachinedoesnotpasstothespinning
step,RinseHoldfunctionmightbeactive
ortheautomaticunbalancedloaddetection
systemmightbeactivatedduetothe
unbalanceddistributionofthelaundryinthe
machine.
Loading door lock
There is a locking system on the loading door of
the machine that prevents opening of the door in
caseswhenthewaterlevelisunsuitable.
Loading door light will start flashing when the
machine is switched to Pause mode. Machine
checksthelevelofthewaterinside.Ifthelevelis
suitable,LoadingDoorlightilluminatessteadily
within1-2minutesandtheloadingdoorcanbe
opened.
Ifthelevelisunsuitable,LoadingDoorlightturns
offandtheloadingdoorcannotbeopened.If
youareobligedtoopentheLoadingDoorwhile
theLoadingDoorlightisoff,youhavetocancel
the current programme; see "Canceling the
programme".
Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pausebuttontoswitchthe
machine to pause mode while a programme is
running. The light of the step which the machine
isinstartsflashingintheProgrammeFollow-up
indicatortoshowthatthemachinehasbeen
switched to the pause mode.
Also,whentheloadingdoorisreadytobeopened,
LoadingDoorlightwillalsoilluminatecontinuously
in addition to the programme step light.
Changing the speed and temperature settings
for auxiliary functions
Dependingonthesteptheprogrammehas
reached, you may cancel or activate the auxiliary
functions; see, "Auxiliary function selection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
C Ifnochangeisallowed,therelevantlightwill
flash for 3 times.
Adding or taking out laundry
PresstheStart/Pausebuttontoswitchthe
machinetopausemode.Theprogrammefollow-