
16 / EN Washing Machine / User’s Manual
To deactivate the Child Lock:
Pressandhold1st and 2nd auxiliary function buttons for 3
seconds while any programme is running. The lights on the
1st and 2ndAuxiliaryFunctionbuttonswillflash,and"C03",
"C02","C01"willappearonthedisplayrespectivelywhile
youkeepthebuttonspressedfor3seconds.Then,"COFF"
will appear on the display indicating that the Child Lock is
deactivated.
C
Inadditiontothemethodabove,todeactivatetheChild
Lock,switchtheProgrammeSelectionknobtoOn/
Offpositionwhennoprogrammeisrunning,andselect
another programme.
Child Lock is not deactivated after power failures or
when the machine is unplugged.
4.13 Progress of programme
Progressofarunningprogrammecanbefollowedfromthe
ProgrammeFollow-upindicator.Atthebeginningofevery
programme step, the relevant indicator light will turn on and
light of the completed step will turn off.
You can change the auxiliary functions, speed and
temperature settings without stopping the programme flow
while the programme is running. To do this, the change
you are going to make must be in a step after the running
programmestep.Ifthechangeisnotcompatible,relevant
lights will flash for 3 times.
CIfthemachinedoesnotpasstothespinningstep,Rinse
Hold function might be active or the automatic unbalanced
load detection system might be activated due to the
unbalanced distribution of the laundry in the machine.
4.14 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases when
the water level is unsuitable.
Loading door light will start flashing when the machine
isswitchedtoPausemode.Machinechecksthelevelof
thewaterinside.Ifthelevelissuitable,LoadingDoorlight
illuminates steadily within 1-2 minutes and the loading door
can be opened.
Ifthelevelisunsuitable,LoadingDoorlightturnsoffandthe
loadingdoorcannotbeopened.Ifyouareobligedtoopen
the Loading Door while the Loading Door light is off, you
havetocancelthecurrentprogramme;see"Cancelingthe
programme".
4.15 Changing the selections after programme
has started
Switching the machine to pause mode
PresstheStart/Pausebuttontoswitchthemachineto
pause mode while a programme is running. The light of
the step which the machine is in starts flashing in the
ProgrammeFollow-upindicatortoshowthatthemachine
has been switched to the pause mode.
Also, when the loading door is ready to be opened, Loading
Door light will also illuminate continuously in addition to the
programme step light.
Changing the auxiliary function, speed and
temperature
Depending on the step the programme has reached, you
cancanceloractivatetheauxiliaryfunctions;see,"Auxiliary
functionselection".
You may also change the speed and temperature settings;
see,"Spinspeedselection"and"Temperatureselection".
CIfnochangeisallowed,therelevantlightwillflashfor3
times.
Adding or taking out laundry
1.PressStart/Pausebuttontoswitchthemachineto
pause mode. The programme follow-up light of the
relevant step during which the machine was switched into
the pause mode will flash.
2. Wait until the Loading Door can be opened.
3.OpentheLoadingDoorandaddortakeoutthelaundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions, temperature and
speed settings if necessary.
6.PressStart/Pausebuttontostartthemachine.
4.16 Cancelling the programme
Tocanceltheprogramme,turntheProgrammeSelection
knobtoselectanotherprogramme.Previousprogramme
will be cancelled. End / Cancel light will flash continuously to
notify that the programme has been canceled.
Pumpfunctionisactivatedfor1-2minutesregardlessofthe
programme step, and whether there is water in the machine
or not. After this period, your machine will be ready to start
with the first step of the new programme.
CDepending on the step where the programme was
canceled in, you may have to put detergent and softener
again for the programme you have selected anew.
4.17 End of programme
“End”appearsonthedisplayattheendoftheprogramme.
1. Wait until the loading door light illuminates steadily.
2.PressOn/Offbuttontoswitchoffthemachine.
3. Take out your laundry and close the loading door. Your
machine is ready for the next washing cycle.
4.18 Your machine is equipped with a
"Standby Mode"
Incaseofnotstartinganyprogrammeorwaitingwithout
making any other operation when the machine is turned
onbyOn/Offbuttonandwhileitisinselectionsteporif
no other operation is performed approximately 2 minutes
after the programme you selected has come to an end,
your machine will automatically switch to energy saving
mode. Brightness of indicator lights will decrease. Also,
if your product is equipped with a display showing the
programmeduration,thisdisplaywillcompletelyturnoff.In
caseofrotatingtheProgrammeSelectionknoborpressing
any button, lights and display will restore to their previous
condition. Your selections made while exiting the energy
saving mode may change. Check the appropriateness of
your selections before starting the programme. Readjust if
necessary.This is not a fault.