No, this is not supported.
2. Can I charge my phone while it is set on the mount?
The Belkin WIC003 does not charge your phone wirelessly. If you wish to charge your phone while using the
Belkin WIC003, you will need to use a Lightning® cable and charger.
3. How do I attach and remove my phone from the mount?
To attach the Belkin WIC003, simply place the back of your phone onto the flat surface of the mount. The
magnets will align your phone perfectly and securely on the mount.
To remove the phone from the mount, simply grasp the top or bottom of the phone and remove it with a
peeling motion. If you attempt to grasp the phone at the center and it pull off the mount, it is possible that the
mount may detach from the vent
4. In what orientations can I place my phone on the mount?
You can set your phone on the mount in either portrait or landscape mode.
5. Can I angle the mount for a better view?
Yes. The mount can be rotated and turned left, right, up or down for the best and safest viewing angle while in
use.
6. Can I use the vent mount with my car's heater turned ON?
Caution should be taken when using your vehicle's heater while your phone is attached to the Belkin WIC003.
Since the mount places your phone directly in the airflow path, the warm air may cause your phone to
overheat. It is recommended to disable airflow from the vent that the Belkin WIC003 is connected to when
using the heater.
© 2022 Belkin International, Inc.
