Belkin F8E883UK User manual

Wireless Optical
Desktop Kit
F8E883uk-BNDLUser Manual
P74782uk
Introduce wireless freedom to your desktop

1
___
2
___
3
___
4
___
5
___
6
___
7

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Compatible Equipment . . . . . . . . . . . . . . . . . . . . 3
Operating Systems . . . . . . . . . . . . . . . . . . . . . . . 3
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Quick Installation Guide . . . . . . . . . . . . . . . . . . . .4
3. Software Installation for
Windows 98, Me, 2000, and XP . . . . . . . . . . . . . . .5
4. USB Standard Keyboard Hot Key Functions . . . . 6
5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . .7
6. Uninstallation process for
Windows 98, Me, 2000, and XP . . . . . . . . . . . . . . .9
7. Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Table of Contents
1
___
2
___
3
___
4
___
5
___
6
___
7

1
___
2
___
3
___
4
___
5
___
6
___
7
2
Congratulations and thank you for purchasing the
Wireless Keyboard and Optical Mouse bundle from
Belkin. We appreciate your business and are sure
you will enjoy years of reliable use with these high-
quality, input devices. Please review this entire
User Manual so you can be sure to get the most
reliable performance from your new equipment.
Introduction
1

1
___
2
___
3
___
4
___
5
___
6
___
7
3
1
Compatible Equipment
Works with all Pentium® processor based PCs.
NOTE: Use of these products on a desk made
of iron, or other metal, will negatively impact the
operation of your Wireless Keyboard and Mouse.
Operating Systems
Windows® XP, Me, 2000, 98 SE
Package Contents
Wireless Keyboard
Wireless Optical Mouse
Receiver
2 AAA batteries
2 AA batteries
User Manual
Drver CD
Please read the instructions for installing,
operating, and using the wireless desktop.
Introduction

1
___
2
___
3
___
4
___
5
___
6
___
7
4
1. Be sure that your computer is turned on. If you
are running Windows 98SE, Me, or 2000, you
will need to keep your old keyboard and mouse
connected for installation.
2. Connect only the receiver to your
computer through the USB port.
Note: When connecting the USB cable to your
computer, Windows will start a New Hardware
Wizard. In Windows XP, it will complete the Wizard
automatically. In Windows 98, Me, and possibly 2000,
you will need to follow through the New Hardware
Wizard with your old keyboard and mouse.
3. Install the batteries into your Keyboard and
Mouse. Please make sure you follow the
indication on the inside compartment for correct
positioning of the batteries.
4. Press the receiver button.
5. Press the reset button on the mouse.
6. Press the receiver button again.
7. Press the connect button on the
keyboard. The connect button is the
green lighted button indicated on your
keyboard by the word "connect".
2
Quick Installation Guide

1
___
2
___
3
___
4
___
5
___
6
___
7
5
Note: The Keyboard and Mouse should now be functioning.
If they are not, repeat the setup instructions and refer to the
“Troubleshooting” section for help. When the Mouse and
Keyboard are operational, the software can be installed.
Warning: It is recommended that you uninstall any
previously installed keyboard and mouse software
prior to installing your new Belkin software.
1. Be sure your computer is powered on.
2. Insert the CD into your computer’s
CD-ROM drive.
3. If you have not previously installed Keyboard and
Mouse software, click “OK” and the installation
will begin. Follow the on-screen instructions.
4. Upon completion of installation, you will
be prompted to restart your computer.
You must restart at this time in order
for the software to function.
3
Software Installation For Windows
98SE, ME, 2000, and XP

1
___
2
___
3
___
4
___
5
___
6
___
7
6
4
USB Standard Keyboard Hot Key Functions

1
___
2
___
3
___
4
___
5
___
6
___
7
7
The Keyboard and/or Mouse is/are not
detected or do not work after installation.
• Make sure the receiver cable is plugged
into the computer’s USB port.
• For optimal performance, place the receiver
at least eight inches (20cm) away from the
computer monitor, the computer, any external
storage devices, or other electrical devices.
• Make sure you have properly installed
the batteries. Test the batteries to make
sure they are not dead (you can do this
by installing them into another device).
• You may have other system devices that
are conflicting with the Mouse and/or the
Keyboard. Check the IRQ/address setting of these
devices for conflicts and change the settings
as required. Please refer to your computer
documentation or the manufacturer’s technical
support for assistance in making these changes.
5
Troubleshooting

1
___
2
___
3
___
4
___
5
___
6
___
7
8
• Make sure you have properly established
communication/ synchronization between the
receiver and the Mouse and Keyboard.
• If the Keyboard and/or Mouse are not working,
make sure that the LED on the Keyboard and/or
Mouse start flashing when you push any of the
Keyboard keys, Mouse buttons, or move the
Mouse. If the LED does not flash, check to make
sure you have installed the batteries correctly.
• When the Keyboard or Mouse LEDs are flashing,
the LED on the receiver should also flash to
indicate they are speaking to each other. If the
LED on the receiver does not flash, it means that
the devices have not connected properly. Repeat
step 4 to 7 of the quick installation guide.
• If your Mouse pointer becomes choppy on-
screen or the Keyboard does not register
keystrokes, replace batteries with a fresh set.
• If your Cursor is controlled by another system in an
office or multi-user environment, try to unload the
batteries, insert them again after 2 minutes and repeat
step 3 to step 7 of the quick installation guide.
Troubleshooting
5