Belkin F1DC100R - OmniView 17" LCD Rack Console User manual

Introduction 1 Specifi cations 2 Installation 3



Key-Locking
Mechanism
105-Key
Keyboard (PS/2)
Power Switch with Status LED
Dual-Rail System
17" TFT/LCD
Active-Matrix
Color Panel
LCD
Front-Panel Controls
Touch Pad (PS/2)
Stow-Away
Handle
Fold-Down Handle
Part No.: F1DC100R
Enclosure: Heavy-duty steel
Power: 100–240VAC @ 50–60Hz, auto-switching
Dimensions: 19 (W) x 1.75 (H) x 17.5 (L) in. (483 x 44.5 x 445mm)
Weight: 25.1 lbs. (11.4kg.)
Display Type: 17" TFT/LCD active-matrix, color
Resolution: Up to 1280x1024@65Hz
Video Type: VGA
Contrast Ratio: 350:1
Brightness: 250 cd/m2 typical
Pixel Pitch: 0.264 (H) x 0.264mm (W)
Panel Color: 16.2 million display colors
Viewing Angle: 115° (Horiz.)/90° (Vert.)
Keyboard Type: Laptop-style, integrated, high-quality, 105-key keyboard with
touch pad
Operating Life
of Individual Keys: 8 million cycles
CPU Port Type: HDDB15 (VGA), miniDIN6 (PS/2)
CPU Platforms: VGA, PS/2
Keyboard Output: miniDIN6 (PS/2)
STEP 1: Remove the contents from the box.
STEP 2: Install the rack-mount brackets to the LCD Rack Console.
STEP 3: Mount the LCD Rack Console to your rack or cabinet.
STEP 4: Connect the IEC power cable to an active power outlet.
STEP 5: Connect your VGA and PS/2 cable kit to the LCD Rack Console.
STEP 6: Connect your VGA and PS/2 cable kit to your KVM switch or server.
STEP 7: Power up the LCD Rack Console.
STEP 8: Power up your KVM switch or server.
IntroductionIntroduction 1. Specifi cations 2. Installation



Package Contents
This booklet will guide you through the basic steps needed to install the OmniView
17" LCD Rack Console.
Quick
Installation
Guide
Two Keys
VGA and PS/2
Cable Kit
IEC Power Cable
Rack-Mount
Brackets with
Screws
OmniView
17" LCD
Rack Console
Display Diagram

Belkin Tech Support
US: 800-223-5546 ext. 2263
310-898-1100 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 235 546
New Zealand: 0800 235 546
Belkin Corporation
501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
[phone]
[phone] fax
Belkin Ltd.
7 Bowen Crescent, West Gosford
NSW 2250, Australia
[phone]
[phone] fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
[phone]
[phone] fax
© 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of
respective manufacturers listed.
Start Here
Control Control your rack servers from a compact 1U
rack console
Quick Installation Guide F1DC100R



P75057
OmniView® 17"
LCD Rack Console
FAQ/Troubleshooting 4
OmniView® 17"
LCD Rack Console
3. FAQ/Troubleshooting
My LCD Rack Console doesn’t appear to be on.
Make sure that the power switch located at the front of the LCD drawer is in the “on”
position and that the power cable is properly plugged in.
Do I have to install any software to use the LCD Rack Console?
No, the LCD Rack Console does not require any drivers or software to be installed in
your servers. Simply connect the LCD Rack Console directly to a server or KVM switch
and it is ready for use.