Belkin NETMASTER P73137 User manual

Ca
Es
Po
En
P73137 F8E204-USB
USB NetMaster™
Scroll Mouse
User Manual
Guide d’utilisation de la
souris NetMaster™USB avec
roulette de défilement
Manual de usuario para el
mouse NetMaster™USB con
rueda de desplazamiento
Mouse de Rolagem USB
NetMaster™-
Manual do Usuário

Table of Contents
Ca
Es
Po
En
English . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Français (Canada) . . . . . . . . . . . . . . . . . . 13
Español . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Português . . . . . . . . . . . . . . . . . . . . . . . . 37

ABOUT YOUR MOUSE
1.1 An Introduction to your new Belkin NetMaster™
Scroll Mouse
The Belkin NetMaster™Scroll Mouse offers you ease of use on
the Internet, eliminating the need for scroll bars. You can scroll
smoothly through your documents or Web Pages, browsing
them quicker and more efficiently. Imagine, with the simple
movement of the scroll wheel, you can glide effortlessly through
Web Pages and long documents, without having to remove your
pointer from the document itself.
Also, by eliminating this simple task, you can add to the lifetime
of your mouse by reducing natural wear and tear. Not to mention
the reduced tension on your wrist from excessive, repetitive
movement to the scrollbars. Internet surfing couldn't be easier!
Once the software has been loaded onto your computer, the
center button of your mouse (the wheel) can be programmed to
perform the same tasks as:
"Left Button Double Click"
"F1" through "F12"
"Enter" Key
"Page Up" Key
"Page Down" Key
"Home" Key
"End" Key
These can be used in place of your scrolling options.
1. Introduction
1
En

1. Introduction (continued)
2
1.2 Connecting Your Mouse
a. Locate the computer Universal Serial Bus (USB) port on the back
of your computer.
b. Plug your mouse into the port. Check the box in which your
mouse was shipped to verify the ports supported.
c. At this point, your mouse will work with the built in Microsoft®
Operating System. To use the extra features of your middle
button, you must install the included software.

3
2. Software Installation
INSTALLING YOUR NETMASTER™SOFTWARE
A step-by-step guide to getting your
mouse installed
Windows®98 Installation
a. Insert the NetMaster™diskette in the A: or B: drive.
b. Click on "Start" in the lower left corner of your screen.
c. Then click on "Run".
d. Type "A:setup" (or "B:setup") and then click on "OK".
e. Follow the on-screen instructions to complete the installation
of the NetMaster™.
f. To make the process run smoothly:
1. Click on "Next" the next two times it appears.
2. Type in your name and the company's name, then click
on "Next".
3. Click on "Next" the next two times it appears.
4. Specify if you are using a PS/2 or Serial mouse (refer to
section 1.2) then click on "OK".
5. Select "Yes, I want to restart my computer now" then
click on "Finish".
En

4
3. Troubleshooting
Q: I can get into Windows®or into "Safe Mode" but I
cannot use the mouse.
A: If you have more than one driver, this could be causing your
computer to boot in safe mode or not allow your mouse to
work at all. If you are using a PS/2 mouse then the driver
must state that it is using a PS/2 driver. If you are using a
Serial mouse then the driver must state that it is using a
Serial driver on COM1 or COM2. If you have a Serial Mouse
and you are not sure whether you are using COM1 or COM2
then try moving the mouse to another serial port on the
back of your computer, (most computers have two, if you
have only one then it will more than likely be COM1). If you
have more than one driver then you must remove the
excess drivers.
Q: If I have more than one mouse driver how do I remove
the driver without the mouse control? How do I boot
into normal Windows®mode?
A: Use your "Windows®" Key at the bottom left hand corner of
your keyboard if you have one; if not, press "Alt + S" to go
to the "Start" button in Windows®95. Then use your "Up"
Arrow to select, "Settings" then use your "Right" Arrow to
select "Control Panel" and then press "Enter".
These steps have taken you to the "Control Panel" where
you can gain access to your "Device Manager". The "Device
Manager" shows your driver status and information and it
will allow you to modify their settings.
After entering the "Control Panel" use your "Up" and
"Down" Arrows to select, "System" and then press "Enter".
After entering "System Properties" use your "Right" Arrow
to select "Device Manager". Then press Tab until you have
selected "Computer" and then use the "Down Arrow" until

5
3. Troubleshooting (continued)
your "Mouse" is highlighted. Then use your "Right Arrow"
to expand and select your mouse driver or drivers.
After you have chosen your mouse driver you can now
modify it by removing the driver or changing the driver.
To remove the driver you have selected, use your "Tab"
key until the "Remove" tab is selected. Then press
"Enter". This will remove the driver. Use your "Arrow"
Keys to select any other drivers and repeat the process
until all but one driver remains. Even if it is the wrong
driver you can use it and change it to the mouse driver
you want.
After removing or changing the mouse driver, use your
"Tab" key until "Close" is selected and then press
"Enter". Then you will have to reboot your computer. Use
your "Windows®" Key at the bottom left hand corner of
your keyboard if you have one; if not, press "Alt + S".
Then use the "Up" Arrow to select "Shut Down" and use
your "Enter" key. Use your "Arrow" Key to select
"Restart" and press "Enter".
Q: After installing the mouse driver and rebooting, my
mouse will not work. How do I change the mouse
driver without mouse control?
A: Use your "Windows®" Key at the bottom left hand corner
of your keyboard if you have one; if not, press "Alt + S" to
go to the "Start" button in Windows®95. Then use your
"Up" Arrow to select "Settings" then use your "Right"
Arrow to select "Control Panel" and then press "Enter".
These steps have taken you to the "Control Panel" where
you can gain access to your "Device Manager". The
En

6
3. Troubleshooting (continued)
"Device Manager" shows your driver status and information
and it will allow you to modify their settings.
After entering the "Control Panel" use the "Up" and
"Down" Arrows to select "System Properties" and then
press "Enter". After entering "System Properties" use the
"Right" Arrow to select "Device Manager". Then press
"Tab" to bring your selection to "Computer" and then use
the "Down" Arrow until your "Mouse" is highlighted. Then
use your "Right" Arrow to expand and select your mouse
driver or drivers. After you select the mouse driver, use your
"Tab" key to select "Properties" and then press "Enter". Use
your "Right" Arrow key to choose the, "Driver" tab and then
use your "Tab" key to choose "Update driver" or "Change
Driver" and then press "Enter".
The next options will vary from computer to computer
because there are many types of Windows®95/98 OS
versions. The wording or options will be a little different but
should be somewhat the same.
Windows®will then continue to ask questions and help guide
you through the changes. Use your "Arrow Keys", "Enter",
and "Tab" keys to continue through the process. Windows®
may or may not start searching for Plug-and-Play devices
right away and it may or may not find anything new. If it
does not find anything new it will ask you another line of
questions and if it does find something new choose
something similar to "This Device is not in the list".
Windows®will then ask if you want Windows®to search for a
new device or will ask if you want to select a driver from a
list. You will want to choose a device or driver from a list. Use
your "Arrow", "Tab" and "Enter" keys to navigate and finish

7
3. Troubleshooting (continued)
utill the end of questioning. After finishing, Windows®may
or may not ask you to reboot your computer. Yes, you will
want to restart your computer. If it does not ask you to
restart your computer you will have to close "System
Properties". Use the "Tab" key until "Close" is selected
and then press "Enter". Then you will have to reboot your
computer. Use "Windows®" Key at the bottom left hand
corner of your keyboard if you have one; if not, press "Alt
+ S". Then use the "Up" Arrow to select "Shut Down"
and use your "Enter" key. Use the "Arrow" Key to select
"Restart" and press "Enter".
Q: Why does my external mouse not work with my
laptop computer?
A: You may have to disable the onboard mouse in order to
use an external mouse. Try looking in your CMOS or BIOS
in order to disable the onboard mouse. If you do not have
this option or do not know how to get into your BIOS or
CMOS, please follow instruction in your computer
manual or call the computer dealer/technical support for
your computer.
En

8
4. How to Use Your Mouse
Get to know all of the options available to you
When it comes to programming your middle button (the scroll
wheel), it couldn't be any easier. On the bottom right hand
corner of your screen, you will find a yellow box with an
orange triangle in it. Click on this, then click on "Open".
Starting with the "Universal Scroll" section, you will be
allowed to choose and restrict the direction your mouse can
scroll. "X-Scroll" and "Y-Scroll" are already selected for you.
This allows you to scroll left/right and up/down respectively.
Clicking off the "X-Scroll" will make it so that you can scroll
only up and down while clicking off the "Y-Scroll" with make it
so that you can only scroll left and right. Clicking off both of
them will render the scrolling features of the wheel useless.
The "Direction Reverse" field will reverse the direction that
you scroll. So by clicking it, if you depressed the wheel and
moved your mouse to the left, you would scroll to the right.
You are also able to choose between scrolling by lines or by
pages. Choosing to scroll by page is usually recommended for
larger documents that need to be browsed quickly.
"Speed" will determine how quickly your screen will move
when you activate the "Auto Browse" feature.
"Auto Browsing" allows you to scroll automatically by clicking
the wheel once. This will change the look of the point to a dot
with four arrows pointing from it. Move the mouse in the
direction that you wish to browse and the page will smoothly
go that direction. The further away you move from your
original point, the faster the scrolling.
From here, you can set how many lines per second you would
like the browser to move. The higher the setting, the faster
the scrolling action.

9
4. How to Use Your Mouse (continued)
"Zoom In" is measured by factors. The higher the factor,
the farther in the zoom. The "Size" indicates how large a
window you have to view with.
Your scroll wheel can be used for features other than
scrolling. You can set it to "Left Button Double Click", "F1"
through "F12", "Enter" Key, "Page Up" Key, "Page Down"
Key, "Home" Key, "End" Key.
To activate the settings that you chose, select "Apply".
To keep your setting(s), select "OK".
To keep your settings as they were before you opened the
settings window, select "Cancel".
Care for Your Mouse
Maintenance of your NetMaster™Scroll Mouse is important.
It is designed to provide years of trouble-free service. A
self-cleaning ball cage helps prevent dust and lint from
building up around the ball. However, if the pointer should
skip or move abnormally on screen, we recommend you
clean your mouse manually.
a. First, turn the retainer ring counter clockwise to remove
the ball.
b. Wipe the ball with a clean lint-free cloth.
c. Blow into the ball cage to dislodge any dust and lint.
If there is build-up on the rubber rollers inside the ball
cage, clean using a cotton swab lightly coated with
isopropyl alcohol to remove any debris.
En

5. Uninstall
10
Taking the mouse software off of your computer
Windows®98
a. First, it will be necessary to close the "Mouse Control Panel".
Click on the "X" button in the upper right corner of the
"Mouse Control Panel" window. When asked if you are sure if
you want to quit the "Mouse Control", click on "Yes". Now you
are ready to begin the uninstall process.
b. Select "Start".
c. Select "Settings".
d. Select "Control Panel".
e. Select "Add/Remove Programs".
f. Select "Belkin Mouse Driver", then click on "Add/Remove".
g. You will be asked if you are sure if you want to remove
"Browser Mouse" and all of its components. Click on "Yes".
h. The uninstall process will begin. Follow the on-screen
instructions to complete the process.

Information
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Belkin Components, of 501 West Walnut Street, Compton CA 90220,
declare under our sole responsibility that the product:
F8E204-USB
to which this declaration relates:
Complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
CE Declaration of Conformity
We, Belkin Components, declare under our sole responsibility that the F8E204-USB, to which
this declaration relates, is in conformity with Generic Emissions Standard EN50081-1 and
with Generic Immunity Standard EN50082-1 1992.
Belkin Components Limited Lifetime Product Warranty
Belkin Components warrants this product against defects in materials and workmanship for
its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at
no charge provided it is returned during the warranty period, with transportation charges
prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of
purchase may be required.
This warranty does not apply if the product has been damaged by accident, abuse, misuse,
or misapplication; if the product has been modified without the written permission of Belkin;
or if any Belkin serial number has been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS,
WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS
ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or
addition to this warranty.
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER
LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME,
GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM
OR DATA STORED IN OR USED WITH BELKIN PRODUCTS.
Some states do not allow the exclusion or limitation of incidental or consequential damages
or exclusions of implied warranties, so the above limitations of exclusions may not apply to
you. This warranty gives you specific legal rights, and you may also have other rights that
vary from state to state.
En

Belkin Components B.V.
Diamantlaan 8 • 2132 WV
Hoofddorp • The Netherlands
Tel: [phone]
Fax: [phone]
Belkin Components, Ltd.
Unit 13 • Gatelodge Close • Round Spinney
Northampton • Northants • NN3 8RX • UK
Tel: [phone]
Fax: [phone]
belkin.com
Belkin Components
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: [phone]
Fax: [phone]
© 2000 Belkin Components. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.