Belkin RK5012 User manual

RK5012, RK5013, RK5016, RK5017 Instructions Page 1 P35726
www.belkin.com
Belkin Corporation
501 West Walnut Street
Compton, CA 90220-5221, USA
Tel: [phone]; Fax: [phone]
©2005 Belkin Corporation. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
RK5012 Product Inventory RK5013 Product Inventory
Double Sided 1U Cable Manager Double Sided 2U Cable Manager
12-24 Screw (4) 12-24 Screw (4)
M6 Cage Nut (4) M6 Cage Nut (4)
M6 Screw (4) M6 Screw (4)
RK5016 Product Inventory RK5017 Product Inventory
Single Sided 1U Cable Manager Single Sided 1U Low-Density Cable Manager
12-24 Screw (4) 12-24 Screw (4)
M6 Cage Nut (4) M6 Cage Nut (4)
M6 Screw (4) M6 Screw (4)
Installing Your RK5012, RK5013, RK5016, and RK5017 Cable Manager
1. Identify hardware required for your application. Your RK2000 and RK2001 Racks will require
12-24 screws and your RK1000, RK1001, and RK1002 Enclosures will require the M6 hardware.
2. Determine the location where you wish to install your cable manager and attach.
RK5012, RK5013, RK5016, and RK5017
INSTRUCTIONS
RK5012 RK5016
RK5013 RK5017