Belkin Titan F1DC101C-US User manual

Package Contents
Introduction 1
Introduction
This booklet will guide you through the basic steps needed to install the
17” LCD Rack Console with Dual-Rail Technology.
IEC Power Cable
Side-Rail Kit VGA, PS/2 Cable Kit
17" Dual-Rail LCD
Rack Console
Quick Installation
Guide
Keys

Specifications 2
Specifications
Material Heavy-duty steel
Power Auto-switching
100 to 240VAC
50 to 60Hz
48 watts
Net Weight 32.6 lbs. (14.8kg.)
Unit Dimensions 19 (W) x 26.3 (D) x 1.70 (H) in. (483.2 x 668.51 x
43.18mm)
Minimum Rack-Mount Depth 26 in. (660.4mm)
Maximum Rack-Mount Depth 36 in. (914.4mm)
Display Type 17"TFT/LCD active-matrix color
Resolution Up to 1280x1024
Contrast Ratio 450:1
Brightness 250 cd/m2 typical
Pixel Pitch 0.264mm x 0.264mm
Menu
On/Off

Specifications 3
Panel Color 16.7 million display colors
Response Time Rising 2ms, Decay 14ms
Keyboard Type Laptop style
Keyboard Connection PS/2
Mouse Type Touchpad style
Mouse Connection PS/2
Operating Life of Individual Keys 8 million cycles
Warranty 2 years
105-Key
Keyboard TFT/LCD
Active-Matrix
Color Panel
LCD
Front-Panel Controls
Touch Pad
Key-Locking
Mechanism
Up
Down
Menu
Auto
On/Off
Auto
Menu

Installation 4
Installation
Step 1 Place the console inside the rack.
Step 2 Mount the front brackets to the rack.
Step 3 Slide the side rails onto the mounting studs.

Installation 5
Step 4 Mount the side rails to the rear of the rack.
 
Step 5 Connect the IEC power cable to an active power
outlet and power up the Console.
 

Connecting the KVM Switch or Server 6
Connecting the KVM
Switch or Server
Step 1 Make sure your KVM switch or server is powered OFF.
Step 2 Using the included PS/2 KVM Cable Kit, connect one set of VGA and PS/2
connectors to the back of the Console. (Refer to diagrams below.)
Step 3 Connect the other end of the Cable Kit to the console monitor, keyboard, and
mouse ports on your KVM switch or server. (Refer to diagrams below.)
Step 4 Power ON the Console.
Step 5 Power ON the KVM switch or server connected to the Console.

Connecting the KVM Switch or Server 7
You are now ready to use your LCD Rack Console.
The Console offers two power on/off methods:
• a power button on the LCD front-panel console, and
• an LCD power-save (with drawer closure).


Console
KVM Switch
Console
Server

Troubleshooting 8
Troubleshooting
My Console doesn’t appear to be on.
Make sure that the power switch located at the front of the keyboard drawer is “on” and
that the power cable is connected properly.
What is the maximum video resolution that the LCD
panel supports?
The LCD panel supports a resolution of up to 1280x1024.
Do I have to install any software to use the Console?
No, the Console does not require any drivers or software to be installed in your
computers. Simply connect the Console directly to a computer or to a KVM switch, and it
is ready for use.

Start Here
Quick Installation Guide F1DC101C-US
Titan 17” Dual-Rail
LCD Rack Console

Belkin Tech Support
US: 800-223-5546, ext. 2263
310-898-1100, ext. 2263
UK: 0845 607 77 87
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 65 64857620
Europe: www.belkin.com/support
Belkin International, Inc.
501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
[phone]
[phone] fax
Belkin Ltd.
4 Pioneer Avenue
Tuggerah Business Park
Tuggerah, NSW 2259, Australia
[phone]
[phone] fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
[phone]
[phone] fax
© 2008 Belkin International, Inc. All rights reserved. All trade names are registered
trademarks of respective manufacturers listed.
PM01576
Titan 17” Dual-Rail
LCD Rack Console