Belkin USB 2.0 RELEASE NOTES Instruction Manual

USB 2.0 release notes
USB 2.0 release notes
Version 2.1.10.x includes support and fixes for the following:
•Enhanced enumeration for composite devices
•Optimized port resets
•Fixed cardbus eject utility
Version 2.1.9.x includes support and fixes for the following:
•Removal of Wake Events for ATi
Version 2.1.8.x includes support and fixes for the following:
•Added support for the ATi chipset
Version 2.1.7.x includes support and fixes for the following:
•Fixes International Microsoft XP driver being replaced with OWC and USB 1.1 devices being
inactive
Version 2.1.6 includes support and fixes for the following:
•Fix Interval of Isochronous transfers
•This driver addresses the ALi chipset CardBus eject problem in Windows 98 and Windows ME.
Version 2.1.5 includes support and fixes for the following:
•Fix High Speed Isochronous Out Transfers
•Fix Isochronous Interval transfers
•Fix problem with removal of composite devices
Version 2.1.4 includes support and fixes for the following:
•Improve speed of O2Micro single slot CardBus Controllers
•Allow simultaneous device plugins on root hub
•Fix high speed isochronous interval transfers.
Version 2.1.3 includes support and fixes for the following:
•Fix standby issue with Low Speed devices
Version 2.1.2 includes support and fixes for the following:
•Fix large data blocks being used in isochronous transfers
•Add reset for zero pipe installs
•Fix full speed detection after configure flag set
•Fix endpoint cancel transfer issue.
•Fix port reset of composite devices.
•Fix bad external IRPs causing crashes
Version 2.1 includes support and fixes for the following:
•Microsoft WHQL 3rd Party Bus Driver Support
•Fixed Microsoft XP driver being replaced with OWC and USB 1.1 being inactive.

USB 2.0 release notes
Version 2.0.9 includes support and fixes for the following:
•Improved detection of Low and Full Speed devices
Version 2.0.8 includes support and fixes for the following:
•Fixed problem with Cypress hubs
•Repaired Windows 98 S3 Standby enumeration problems
Version 2.0.7 includes support and fixes for the following:
•Wait Wake Support
•PME State Detection Support
•Suspend/Hibernate Improvements
•Fix USB_CYCLE_PORT
Version 2.0.6 includes support and fixes for the following:
•Added support for USBView application
•Microsoft symbolic links supported
•Fixed resets for devices that removed themselves when suspended
Version 2.0.5 includes support and fixes for the following:
•Limits unnecessary bus activity
•Ensures that allocated resources are properly deallocated on removal
•Fixed bus reset
•Fixed problem on certain machines when resuming from standby
•Fixed double reset of non-Hi-Speed devices
Version 2.0.4 includes support and fixes for the following:
•Split Isochronous Camera Artifacts fixed
•Split Isochronous Data Out fixed
•Composite Device Support
•Zero Size Transfer Bulk fixed
Version 2.0.3 includes support and fixes for the following:
•Isochronous device support
•Self powered device enumeration problems
•USB devices going inactive during EHCI driver install
Limitations:
- Composite device support pending
Version 2.0.2 includes support and fixes for the following:
•Power management support for:
- Improved stability and functionality in Windows 98 SE, Me, 2000, and XP hibernate and sleep modes
•Playback of Video Compact Discs (VCDs)
•USB 2.0 Cameras that use bulk transfers
•Fixed problems with handling of short packets during transfers
Limitations:
- Hi-Speed isochronous device support pending
- Composite device support pending
Version 2.0.1 includes support for the following:
•Bulk, control, interrupt, and split isochronous transfers
•Hi-Speed USB 2.0 Hub support for multiple and cascaded hubs
•Power Management support for:
- Windows 2000 sleep and hibernate support
- Windows Me sleep support for PCI adapters
- Windows 98 SE sleep support

USB 2.0 release notes
•Eject application for Windows 98 and Windows Me to safely eject USB 2.0 CardBus cards
Limitations:
- Hi-Speed isochronous device support pending
- Composite device support pending
- Driver prevents hiberate and suspend functions in Windows XP
- Driver prevents suspend with CardBus cards and hibernate with all cards in Windows Me
- Cannot remove EHCI device using Remove Device feature of Windows 98 SE with devices attached to
adapter.