Belleze 80QT User manual
Owner’s Manual
80QT PORTABLE COOLER
Item# 014-HG-14142 / 014-HG-14143 / 014-HG-14144
NOTICE:
If your package is missing parts or you are having issues with assembly, please call Belleze Furniture directly at
(949)-344-2588. The Belleze Furniture customer service team will address any questions or concerns you may have.
Have this manual open and ready for reference.
CUSTOMER SERVICE:
(949)-344-2588
9:00AM - 6:00PM PST (Monday - Friday)
www.bellezefurniture.com
www.bellezefurniture.com 3
03
04
05
06
07
TABLE OF CONTENTS
OUR BRAND
INSTRUCTIONS MANUAL
ASSEMBLY INSTRUCTIONS
MAINTENANCE
WARRANTY
OUR BRAND
Belleze is one of the nation’s largest direct sellers of home decor. We offer an extensive selection of high-quality
indoor and outdoor furniture, applicances, and accessories. We are committed to making decorating your home
easy, affordable and fun. Everything you need to make your house into a beautiful home can be found at Belleze.
So whether you shop by website or catalog, you can be sure you will always find top-quality merchandise for
your home.
PLEASE LIKE, COMMENT AND SUBSCRIBE.
INSTRUCTIONS MANUAL
www.bellezefurniture.com4
Item
Description
Qty
1
Lid Handle
2
2
Lid
1
3
M5*35 Bolts
2
4
Handle
2
5
M6*16 Bolts
12
6
M6*16 Bolts
4
7
Bottle Opener
1
8
Basin
1
9
Bottle-cap Catcher
1
10
M6*16 Bolts
12
11
Legs
4
12
Bottom Tray
1
13
Casters with Lock
2
14
M6 Allen Wrench
1
15
Casters without Lock
2
INSTRUCTIONS MANUAL
www.bellezefurniture.com 5
ASSEMBLY INSTRUCTIONS:
1. Please make sure all parts are accounted for before beginning
assembly.
2. Place main basin up-side down on clean soft surface
3. Attach the 4 legs (part 11) to basin using the 12 M6*16 Bolts (part
10).
4. Place the bottom tray (part 12) over each leg and then screw each
caster (parts 13 &15) into the legs with an open end wrench.
5. Turn over entire assembly right side-up. Press caster brake lever to
lock casters (part 13) and attach left handle (part 4) to main basin us-
ing 6 each M6*16 Bolts tighten with wrench. Repeat for right handle.
6. Attach bottle-cap catcher (part 9) to main basin by 2 bolts.
7. Attach bottle opener (part7) to main basin using 2 each M6*16
Bolts tighten with the M6 Allen wrench.
8. Attach 2 each lid handles (part 1) to cooler lid (part 2) with 2 each
M5*35 Bolts (part 3) tighten .
9.Clean inside of cooler completely with soft dry towel. Place cooler
lid (part 2) on top of main basin (part 8) your cooler is now ready for
use.
Please read the cooler manual carefully and assemble according to
following steps.
www.bellezefurniture.com6
MAINTENANCE
Our iron/steel components for products are coated with rust inhibiting paint
that protects it from rusting. However, due to the nature of iron, surface oxida-
tion (rusting) will occur once these protective coatings are scratched. This is a
natural process and is not a defect! To minimize this condition, we recommend
care when assembling & handling the product to prevent scratching the paint.
ATTENTION
1. Keep all children and pets away from assembly area. Children and pets
should be supervised when they are in the area.
2. Some parts may contain sharp edges. Wear protective gloves if necessary
during assembly.
3. When assembling and using this product, basic safety precautions
should always be followed to reduce the risk of personal injury and
damage to equipment. Please read all instructions before assembly
and use.
4. Check all bolts for tightness before and during usage.
5. Please take time to read these instructions thoroughly and follow
each step carefully for safe and easy operation. Keep this manual for
future reference.
www.bellezefurniture.com 7
LIMITED TERM WARRANTY
ONE (1) YEAR FROM DATE OF PURCHASE
WARRANTY TERMS ADDITIONAL CONDITIONS
ADDITIONAL CONDITIONS
Belleze warrants that its merchandise are free from manufactur-
ing defects (workmanship and/or material) and will either give
credit or replace defective parts for a period of up to one (1) year
from the date of purchase in accordance with the conditions set
forth below. If a manufacturing defect is found, Belleze should
be notied promptly of the defect and supplied a copy of the
invoice and delivery ticket. Inspection by a Belleze employee
or representative may be necessary to verify that a manufac-
turing defect exists, or you may be required to submit samples
to Belleze along with a digital image of the defects. If replace-
ment is required in accordance with this warranty and the de-
fective material or merchandise has been discontinued or un-
available, Belleze reserves the right to select and supply similar
merchandise or offer full credit for the merchandise; otherwise
the same material or merchandise will be supplied for replace-
ment purposes. This warranty is made solely to the retailer and
is not transferable under any circumstances. It is the retailer’s
responsibility to contact Belleze with a claim. We will not handle
claims from consumers directly; all requests must go through
the retailer who sold the merchandise to the consumer. We ad-
vise all retailers to retain invoices for a minimum of one (1) year
for warranty purposes. This warranty supersedes and replaces
all implied warranties of merchantability and use for particular
purpose. No representative, employee, or agent of Belleze or
any other person is authorized to assume for Belleze any ad-
ditional liability or responsibility in connection with Belleze’s
merchandise except as described above. Implied warranties or
merchantability and tness of the merchandise are limited to a
period of one (1) year from the date of purchase. In no event
shall Belleze be liable for indirect, consequential or incidental
damages of any kind.
The following examples are not manufacturer’s defects:
• Colors may vary slightly from the photo because of
photography and printing tolerances.
• Foam will soften slightly.
• Sizes are stated in U.S. standard measurements while the
actual sizes are manufactured using the metric system.
Therefore the sizes may vary slightly.
• There are no exchanges or refunds on any pillows or
toppers sold.
• No returns for buyer’s remorse.
* No returns - other than stated above - will be accepted
Warranty is void for any of the following conditions:
1 Improper maintenance or improper use resulting in damage.
2 Any product modications by dealer, consumer, or other
parties not authorized by Belleze will void this warranty.
3 Floor samples sold or products designated “AS IS” at the
time of purchase are not covered by the warranty.
4 Warranty does not cover minor variations or differences be
tween oor samples or printed illustrations and your furniture.
5 Cost of packaging and shipping to and from Belleze is not
covered by the warranty unless expressly arranged
by Belleze.
6 This warranty covers only articles of furniture intended for
residential use only, does not cover any industrial,
commercial, institutional, or rental use.
7 Dissatisfaction due to buyer’s remorse.
8 Normal wear and tear.
9 Damages incurred during transportation.
10 Damages incurred during assembling or maintenance.
11 Damages incurred by accidents or abuse.
Additional conditions for warranty on upholstery are listed on
the attached addendum.
FOLLOW US: CONTACT US:
www.bellezefurniture.com
(949) 344-2588
This manual suits for next models
3
Other Belleze Accessories manuals
