Belling BPROC60S Instruction Manual

OPERATION - BPROC60S
Control Panel and Features
1) FUNCTION KNOB –
WHEN SWITCHING THE UNIT ON THE FIRST MODE TO APPEAR IS MICROWAVE, AS YOU TURN TO THE
RIGHT, YOU CAN SELECT WHICH MODE YOU WOULD LIKE, THE DIFFERENT MODES ARE MICROWAVE, OVEN,
COMBINATION OF MICROWAVE AND OVEN, AUTOMATIC PROGRAM OR DEFROST. TURN TO THE LEFT TO
START AGAIN.
2) POWER/WEIGHT –
THIS SYMBOL SHOWS HOW MUCH WATTAGE IS SELECTED WHENEVER USING MICROWAVE, OR SHOWS
WEIGHT OF FOOD WHEN USING IN AUTO PROGRAM OR DEFROST. WHEN USING AS MICROWAVE ONLY,
WILL DEFAULT TO 900 WATTS. WHEN USING AS A COMBINATION, WILL DEFAULT TO 300 WATTS. THESE
WATTAGE SELECTIONS CAN BE ADJUSTED AT ANY TIME, SIMPLY TOUCH THE SYMBOL, AND WHEN IT
FLASHES, USE THE RIGHT HAND KNOB TO ADJUST.
3) FAST PREHEAT BUTTON –
THIS MODE WILL ONLY WORK WHEN USING OVEN OR COMBINATION, WILL NOT WORK FOR MICROWAVE
ONLY. BRINGS OVEN TO TEMPERATURE VERY QUICKLY, HOWEVER ONCE TEMPERATURE IS REACHED, START
BUTTON WILL NEED TO BE PUSHED TO COMMENCE COOKING.

4) ON -OFF BUTTON
5) TEMEPERATURE OR AUTOMENU BUTTON –
WHEN THE UNIT IS SWITCHED ON, A DEFAULT TEMPERATURE IS SELECTED. THIS CAN BE OVER RIDDEN AT
ANY TIME, PUSH THE BUTTON AND WHILST FLASHING ADJUST UP OR DOWN TO SUIT.
WHEN IN AUTOMENU MODE, USING THE RIGHT KNOB, SCROLL THROUGH THE 13 DIFFERENT PROGRAMMES
WHILST THEY ARE FLASHING.( REFER TO THE MANUAL FOR EXPLANATION OF THE DIFFERENT AUTO
PROGRAMMES)
6) CLOCK BUTTON –
WHEN THE UNIT IS SWITCHED ON, A DEFAULT TIME WILL APPEAR, THIS CHANGES DEPENDING ON WHAT
MODE IS SELECTED.
I.E IN MICROWAVE, 10 MINUTES WILL BE THE DEFAULT. TO ADJUST THIS TIME, AT ANY TIME PUSH THE
SYMBOL AND WHEN FLASHING, USE THE RIGHT KNOB TO SCROLL UP OR DOWN TO SELECT PREFFERED TIME.
7) START PAUSE BUTTON –
ONCE A MODE OR FUNCTION HAS BEEN SELECTED, PUSH THE START BUTTON TO COMMENCE COOKING.
WHENEVER THE DOOR IS OPENED THIS BUTTON WILL NEED TO BE PUSHED AGAIN TO CONTINUE THE
COOKING FUNCTION.
8) SELECTION KNOB –
THIS KNOB IS USED WHENEVER DEFAULT SETTINGS NEED TO BE CHANGED, OVEN FUNCTIONS NEED TO BE
CHANGED, AN AUTOMATIC PROGRAMME NEEDS TO BE SELECTED, OR ONE OF THE THREE LEVELS OF
DEFROST NEED TO BE SELECTED. THIS SELECTOR IS USED TO MAKE CHANGES WHEN A PARTICULAR SYMBOL
IS FLASHING.