Bellini BTGW845 User manual
Multifunction Bread Maker
BTGW845
I000W Liquidiser
2
Important Safeguards
When using electrical appliances,
in order to reduce the risk of electric
shock and/or injury to persons, basic
safety precautions should always be
followed, including:
For Your Safety
Read all instructions carefully, even if you are
familiar with the appliance.
• To protect against the risk of electric shock,
DONOTIMMERSEtheappliance,powercord
setorpluginwateroranyotherliquid.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory and mental capabilities, or
lack of experience and knowledge, unless
theyhavebeengivensupervisionorinstruction
concerninguseoftheappliancebyaperson
responsiblefortheirsafety.
• Children should be supervised to ensure that
they do not play with the appliance. Do not
allow children to use the blender without
supervision.
• Switch off the power outlet and remove the
plugbeforecleaningorwhentheapplianceis
notinuse.
• Do not operate any appliance with a
damagedpowercordorplug;iftheappliance
malfunctions;orifitisdroppedordamagedin
anymanner.
• Donotallowthepowercordtohangoverthe
edge of a table or counter, or to touch hot
surfaces.
• Do not operate or place any part of this
appliance on or near a hot gas or electric
burner,orinaheatedoven.
• The use of attachments or accessories not
recommended or sold by the manufacturer
cancauseelectricshockorinjury.
• Operate on a dry level surface; sinks,
drainboards or uneven surfaces must be
avoided.
• Donotuseanyapplianceforanythingother
thanitsintendeduse.Thisproductisintended
forhouseholduseonly.
• This appliance is intended to be plugged in
a standard 10A-240V domestic power outlet
only.
• Donotuseoutdoors.
• Neverlettheapplianceoperateunattended.
• Make sure the blade is securely fastened to
the accessories before you assemble them
ontothemotorbase.
• Make sure all parts are correctly mounted
beforeyouswitchontheappliance.
• Do not remove accessories from the motor
basewhentheliquidiserisworking.
• Donotexceedthequantitiesandprocessing
timesindicatedintheinstructionmanual.
• Unplugtheliquidiserimmediatelyafteruse.
• Do not misuse the power cord. Never carry
theappliancebythepowercordorpullitto
disconnect from the power outlet. Instead,
grasptheplugandpulltodisconnect.
• Do not carry the appliance by the power
cord.
• Do not attempt to repair or disassemble the
appliance. There are no user-serviceable
parts.
• Extreme caution is necessary when moving
anyappliancecontaininghotliquids.
• Waituntiltheappliancehasbeenswitchedoff
beforemovingtheLiquidiser.
• Never place the cup into a microwave with
thebladesattached.
• RCD : Unless your home is already tted with
a residual current device (safety switch), we
recommend installing an RCD with a rated
residual operating current not exceeding
30mAtoprovideadditional safetyprotection
when using electrical appliances. See your
electricianforprofessionaladvice.
• Neverkeep the motor runningfor more than
1minute.allowthemotortorestforatleast3
minutestocooldownbeforecontinuing.
• Thisapplianceisnotintendedtobeoperated
by means of an external timer or separate
remote-controlsystem.
3
• Be careful if hot liquid is poured into the
processingcupasitcanbeejectedoutofthe
appliancedue to a sudden steaming.Never
ll the processing cups with ingredients that
arehotterthan60°C.
• This appliance is intended to be used in
householdandsimilarapplicationssuchas:
– staffkitchenareasinshops,ofcesandother
workingenvironments;
– farmhouses;
– byclientsinhotels,motelsandotherresidential
typeenvironments;
–bedandbreakfasttypeenvironments.
• Switch off the appliance and disconnect
from supply before changing accessories or
approachingpartsthatmoveinuse.
FAILURE TO OBSERVE THESE CAUTIONS MAY RESULT
IN DAMAGE TO THE APPLIANCE.
Warning
Ifthesupplypowercordisdamaged,thepower
cord must be replaced by the manufacturer, its
serviceagentorsimilarlyqualiedpersonsinorder
toavoidahazard.
Thisproducthasnotbeendesignedforanyuses
otherthanthosespeciedinthisbooklet.
Accessories: Only use the accessories supplied
with this appliance. Using other accessories is
notrecommendedandmayresultinre,electric
shockorinjury.
Caution - BLADES ARE SHARP, HANDLE
CAREFULLY. Avoid contacting moving parts.
Keep hands, spatulas and other utensils,
away from blades during operation to
reduce risk of injury to persons, and/or
damage to the appliance.
If the blade stops during blending, a hard
ingredientmaybestuckintheblade.Unplugthe
appliance,takethecup/bladeassemblyoffthe
powerbaseandshakethecup,whichshouldfree
thefoodfromtheblade.
Reassembletheblade/cupontotheMotorBase
andcontinueblending.
Warning - Injury Hazard:
Unplug the appliance and ensure the blade
is stopped completely before moving the
cup or touching the blades. Failure to do so
can result in personal injury.
NeveroperatetheLiquidiserwhentheprocessing
cupisempty.
Neveroverlltheprocessingcup.Donotexceed
theMAXline.
SaveTheseInstructions
4
FeaturesofLiquidiser
Milling Blade
Subassembly Keep-FreshStorageLids
PulverizingBlade
Subassembly
350mlShortCup
350mlShortCup
Motorbase
700mlTallCup
SippingRingwithHandle
base
Note: 2 free seal rings are included.
5
GettingtoKnowYour
Liquidiser
TheliquidiseristheidealMultiPurposeBlenderfor
chopping, grating,whipping and grinding. The
unit is so versatile for its size; it can stay on the
benchtopallyearround.
BeforeFirstUse
Before using your Liquidiser for the rst time it is
importantthatyoureadandfollowtheinstructions
inthisuseandcarebooklet,evenifyoufeelyou
arefamiliarwiththistypeofappliance.
Yourattentionisdrawninparticulartothesection
dealingwithIMPORTANTSAFEGUARDS.Findasafe
andconvenientplacetokeepthisbooklethandy
for future reference. This appliance has been
designed to operate from a standard domestic
power outlet. It is not intended for industrial or
commercialuse.CarefullyunpacktheLiquidiser.
Remove all packaging materials and either
discardorretainforfutureuse.
Ensurethat thevoltageof yourelectricitysupply
isthesameasthatindicatedontheratinglabel
ontheappliance(220-240V).Removetheplastic
accessoriesand wash in warmsoapywater.Dry
thoroughlyandreplace.Wipeovertheexteriorof
theMotorBasewithadampspongeorcloth.Do
notuseabrasivecleaners.
HowtoUseYour
Liquidiser
Choosing the Right Blade
Care is needed when handling cutting blades,
especially when removing the blade from the
cup,emptyingthecupandduringcleaning.
TheLiquidisercomeswithtwoblades:
PulverizingbladeandMillingblade.
Pulverizing Blade Subassembly
Chopping-Foodslikeonions,garlicandcarrots,
Andformakingdipssuchassalsaorbeandip.
Blending – Pulverizes ice for smoothies, frozen
cocktailsandmilkshakes.
Mixing- Pancake batters, mufns and quick
breadsaremixedinseconds.
Grating–Hardand soft cheeses and chocolate
aregratedinseconds.
Pureeing – Dishes such as hummus, all-natural
soups, and baby food are creamy smooth in
seconds.
Shaving Ice and Frozen Fruits – For tasty treats
suchassnowconesorfruitsorbets.
Grinding Meats – Delicious chicken and ham
salads or pates are ground in seconds (Do not
exceed150gwhengrinding).
6
Milling Blade Subassembly
Grinding and milling, harder, single ingredient
items such as:
Coffeebeans
Nuts
Cinnamonstick
Dried fruit
NOTICE:
• Do not use the MAX. level marking on
the short cup for dry grinding / milling
option as volume contained will not
give the desired result
• For dry grinding/milling function,do not
ll the ingredient more than 150g.
Operation
NOTICE:
• Never overll the cups above the MAX
level indication.
• Do not mash or grind heavy foods
(e.g., potatoes) or stir thick mixtures
(e.g., dough) in this product.
• Do not operate the product empty.
• Never blending ingredients for more
than 1 minute without interruption.
Using the Pulverizing Blade Subassembly:
1. Place the Motor Base on a at, level, stable
surface.Ensurethepowercordisunplugged.
2. Cleanandcutallsolidingredientsintopieces
small enough to t and place into a Tall or
ShortCup,thenpourinliquidingredients.
3. Ensure the seal ring is seated properly in the
Pulverizing Blade subassembly, then tighten
the Pulverizing Blade subassembly clockwise
thetopoftheCup.
4. Turntheassembledcupandbladesetupside
down and place it into the motor base by
aligningthetabsoncuptotheslotsonmotor
base.Pushthecupdownbyapplyingalight
pressure and twist it clockwise slightly until it
securelylocksintoplace..
NOTE: The appliance will not operate
unless both cup and blade set are
correctly secure in the motor base.
5. Holdtheappliancermlyandplugthepower
cord into 220-240V AC electrical outlet. Then
the appliance will start operation. While
appliance is processing,please hold the unit
byyouronehandtoavoidtheunitabnormal
wobbling.
NOTICE: Never blending the ingredient
for more than 1 minute at a time. Allow
the motor to cool for at least 3 minutes
after each 1 minute of operation. As it
can cause permanent damage to the
motor. If the motor stops working, unplug
the Motor Base and let it cool for 20-40
minutes before attempting to use it again.
NOTICE: If the Blade is not running
smoothly, stop the product and add some
liquid, or reduce the solid ingredients in
the Cup.
6. While the ingredient has been blended, turn
theunitoffbyturnthecupanti-clockwiseand
take it away from motor base and unplug
the power cord from the electrical outlet
immediatelyafteruse.
7. LoosentheBladesubassemblyfromtheCup.
Pourthecontentsintoaseparatecontaineror
screwaSippingRingontotheCuptoconsume
contents directly.For later consumption,
screwaStorageLidontotheCupandplace
theCupinyourrefrigerator.
Using the Milling Blade Subassembly:
1. Placethemotor base on a at, level,stable
surface.Ensurethepowercordisunplugged.
2. FillaShortCupwiththeingredientthatyouwish
togrind.suchas(coffeebeans,nuts,cinnamon
stick,driedfruitsetc.)
3. Tighten the Milling Blade Subassembly onto
theshortcupandturnthebladesubassembly
clockwiseuntilitsecure.
NOTE: Ensure the seal ring is located on
the inside bottom edge of the Milling
Blade Subassembly.
Note: Do not over ll the cup for grinding.
the max.volume is 150g.
7
CareandCleaning
CAUTION: Always ensure the product is
unplugged from the electrical outlet before
relocating,assembling,disassembling,orcleaning
it and wait until it has cooled down sufciently
before cleaning.This product contains no user
serviceable parts. Refer service to qualied
servicepersonnel.
NOTE:
• Unplug the appliance before
cleaning.
• Wait until the appliance has cooled
down sufciently before cleaning it.
• All detachable accessories can be
cleaned by water.
• Clean the motor base with a slightly
damped cloth.
• Do not immerse the motor base in any
liquid.
• Do not use scouring pads, abrasive
cleaning agents or aggressive liquids
such as petrol, alcohol or acetone to
clean the appliance.
1. Alwayswashimmediatelyafteruseforeasier
cleaning.Don’tletfooddryonthecupasthis
willmakecleaningdifcult.
2. After you unplug the appliance, detach the
usedaccessoriesandparts,andcleanthemin
warm,soapywater.Rinseallaccessoriesand
partsunderatapanddrythoroughly.
3. Wipe the motor base clean with a slightly
damped cloth to remove any residue, and
dry thoroughly. Never submerge the motor
base in water or other liquid, or place in a
dishwasher.Donotimmersethemotorbasein
wateroranyliquidforcleaning.
Tips:
• Use a small brush (not included) to remove
particles of food lodged underneath the
blades.
•If some leftover particles dry onto the inside
of the cup, ll the cup about 2/3 full with
warm soapy water and attach the Milling
BladeSubassembly.PlacethecupandBlade
Subassembly onto the Motor Baseand plug
the power cord in to wall outlet.Run the
appliance for about 20-30 seconds to help
cleanthestuckingredients.Repeattheabove
step but use clean tap water. Empty the
Liquidiseranddrythoroughly.
• Storetheproductinacool,dryplace.
4. Turntheassembledcupandbladesetupside
down and place it into the motor base by
aligningthetabsoncuptotheslotsonmotor
base.Pushthecupdownbyapplyingalight
pressure and twist it clockwise slightly until it
securelylocksintoplace.
NOTE: The appliance will not operation
unless both cup and blade set are
correctly x into the motor base.
5. Holdtheappliancermlyandplugthepower
cordinto220-240VACelectricaloutlet,then
theunitwillstarttooperation.Whileappliance
isprocessing,pleaseholdtheunitbyyourone
handtoavoidtheunitabnormalwobbling.
Note: To prevent the appliance from
overheating dry ingredients mixtures
should not be processed for more
than 30 seconds at a time. Turn off the
appliance and allow to cool down before
continuing.
6. While the ingredient has been grinded, turn
theunitoffbyturnthecupanti-clockwiseand
takeitawayfrommotorbase.
7. Loosenthebladesubassemblybyturnitanti-
clockwisefromtheshortcup.
8. If using the Short Cup for storing,tighten a
StorageLidontoittokeepcontentsfresh.
9. Unplug the power cord from the electrical
outletwhentheproductisnotinuseorisleft
unattended.
8
Caution: The Liquidiser attachments(Short Cup,
TallCup,LidandRing)areable tobeplaced in
upperrackofthedishwasheroralternativelythey
can be hand washed with warm soapy water
andthenrinsed.
Caution: Always make sure the seal ring are
still inside after cleaning. The heat from some
dishwashers can cause them to become loose
andpopout.
CAUTION: Handle the blade carefully.
1. Do not immerse the motor base in liquid
to prevent the risk of electric shock.
2. Do not use harsh or abrasive cleansers
on any part of the appliance.
3. Do not use scouring pads, abrasive
cleaning agents or aggressive liquids
such as petrol, alcohol or acetone to
clean the appliance.
4. Do not touch the sharp blades, they are
extremely SHARP and may cause injury.
Do not attempt to remove blades from
the Blade subassembly for cleaning.
Specications
PowerSupply..................................220-240V~50Hz
PowerConsumption...................................... 1000W
Note: As a result of continual improvements,
the design and specications of the product
within may differ slightly to the unit illustrated
from the packaging.
9
Notes
10
Notes
11
Notes
Cat.No.BTGW845
November2016
Table of contents
Other Bellini Blender manuals
