Benchmark 1270-205 User manual

20V MAX BRUSHLESS
RECIPROCATING SAW
WEAR CSA APPROVED
EYE PROTECTION
WEAR EAR
PROTECTION
WEAR A
FACE MASK
READ ALL INSTRUCTIONS BEFORE FIRST USE.
KEEP THIS MANUAL FOR FUTURE REFERENCE.
KEEP AWAY FROM CHILDREN.
Maximum initial battery voltage (measured without a load)
is 20 volts. Nominal voltage is 18 volts.
5 Year Limited Warranty on tool
Battery and charger sold separately
JD522620

1
PRODUCT SPECIFICATIONS
12A VARIABLE SPEED RECIIPROCATING SAW
Voltage 20V MAX*
Variable Speed 0-3,000 SPM
Length of Stroke 1-1/4" (31MM)
Max. Cutting Capacity - Wood (w/12" blade) 3-15/16" (100MM)
Max. Cutting Capacity - Pipe 3/4" (20MM)
Max. Cutting Capacity - Steel 3/8" (10MM)
Electric Brake Yes
Batteries (Sold Separately) 5350-023 (2.5Ah), 5350-011 (4Ah),
5350-012 (5Ah)
Charger (Sold Separately) 5350-010 2.4Amp 5350-022 6A
Fast Charger
Total Weight 5.3Lb (2.4Kg) Tool Only
NEED ASSISTANCE?
Call us on our toll-free customer support line:
1-866-349-8665 (Monday through Friday 9am – 5pm Eastern Standard Time)
• Technical questions
• Replacement parts
• Parts missing from package

2
TABLE OF CONTENTS
Product Specifications .................................................................................. 1
Table of Contents .......................................................................................... 2
General Safety Instructions ............................................................................ 3
Eye, Ear & Lung Protection ............................................................................ 3
Electrical Safey ............................................................................................. 4
Symbol ......................................................................................................... 5
Power Tool Safety .......................................................................................... 6
Work Area Safety ........................................................................................... 6
Electrical Safety............................................................................................. 6
Personal Safety.............................................................................................. 6
Power Tool Use and Care ............................................................................... 7
Service .......................................................................................................... 7
Battery Tool Use and Care.............................................................................. 8
Specific Safety Instructions for Brushless 20V Vs Reciprocating Saw .............. 8
Know Your 20V Max Brushless Vs Recoprocation Saw..................................... 9
Assembly and Operating .............................................................................. 10
Instructions ................................................................................................. 10
Important Safety Instructions....................................................................... 10
Disposal ...................................................................................................... 11
Purpose ...................................................................................................... 11
Installing a Blade ......................................................................................... 11
Removing a Blade........................................................................................ 11
Adjusting the Pivoting Shoe ......................................................................... 11
Lock-Out Switch .......................................................................................... 12
Variable Speed Trigger Switch ..................................................................... 12
Materials You Can Cut ................................................................................. 13
Orbital Action .............................................................................................. 13
When to Use Orbital Action ......................................................................... 13
Setting Orbital Action .................................................................................. 13
General Cutting ........................................................................................... 13
Plunge Cutting ............................................................................................ 14
Cutting Wood .............................................................................................. 14
Metal Cutting .............................................................................................. 15
Maintenance ............................................................................................... 16
Lubrication .................................................................................................. 15
Exploded View ............................................................................................. 17
Parts List ..................................................................................................... 18
Warranty ..................................................................................................... 19
20V MAX BRUSHLESS RECIPROCATING SAW 1270-205

3
GENERAL SAFETY INSTRUCTIONS
WARNING: Before using this tool or any of its accessories, read this manual
and follow all Safety Rules and Operating Instructions. The important precautions,
safeguards and instructions appearing in this manual are not meant to cover all
possible situations. It must be understood that common sense and caution are
factors which cannot be built into the product.
EYE, EAR & LUNG PROTECTION
SYMBOL MEANING
ALWAYS WEAR EYE PROTECTION THAT CONFORMS
WITH CSA Z94.3 or ANSI SAFETY STANDARD Z87.1
FLYING DEBRIS can cause permanent eye damage.
Prescription eyeglasses ARE NOT a replacement for proper
eye protection. The usage of a safety standard compliant
face shield placed over proper safety glasses or goggles
can reduce the risk of facial injury.
Non-compliant eyewear can cause serious injury if broken
during the operation of a power tool.
Use hearing protection, particularly during extended periods
of operation of the tool, or if the operation is noisy.
WEAR A DUST MASK THAT IS DESIGNED TO BE
USED WHEN OPERATING A POWER TOOL IN A
DUSTY ENVIRONMENT.
Dust that is created by power sanding, sawing, grinding,
drilling, and other construction activities may contain
chemicals that are known to cause cancer, birth defects,
or other genetic abnormalities. These chemicals include:
• Lead from lead-based paints
• Crystalline silica from bricks, cement, and other
masonry products
• Arsenic and chromium from chemically treated lumber
The level of risk from exposure to these chemicals varies,
according to how often this type of work is performed. In
order to reduce exposure to these chemicals, work in a
well-ventilated area, and use approved safety equipment,
such as a dust mask that is specifically designed to filter
out microscopic particles.

4
ELECTRICAL SAFETY
WARNING: To avoid electrical hazards, fire hazards or damage to the tool,
use proper circuit protection.
WARNING: Ventilation openings in batteries and chargers must always
be open to allow cooling air to circulate freely. Air vents that are blocked,
restricted or covered may result in the battery or charger overheating.
Overheating may lead to damage to the tool or cause a fire, resulting in
possible serious injury.
20V MAX BRUSHLESS RECIPROCATING SAW 1270-205

5
SYMBOLS
WARNING: Some of the following symbols may appear on the reciprocating
saw. Study these symbols and learn their meaning. Proper interpretation of these
VVOLTS Three-phase alternating current
with neutral
AAmperes Direct current
Hz Hertz noNo load speed
WWatts Alternating or direct current
kW Kilowatts Class II construction
ųF Microfarads Splash-proof construction
LLiters Watertight construction
kg Kilograms Protective grounding at grounding
terminal, Class I tools
HHours .../mln Revolutions or reciprocations per
minute
N/cm2Newtons per
square centimeter ØDiameter
Pa Pascals 0
OPM Oscillations per minute Arrow
MIN Minutes Warning symbol
SSeconds Wear your safety glasses
Alternating current Wear a dust mask
Three-phase alternating
current Wear hearing protection
This symbol designates that this tool is listed with U.S. and Canadian requirements by
cTUVus Testing Laboratories, Inc.
UL62841-1，UL62841-2-11;
CSA C22.2#UL62841-1，UL62841-2-11.
JD522620

6
POWER TOOL SAFETY
WARNING: Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of a ground fault circuit interrupter
(GFCI) reduces the risk of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power
tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
connecting to power source and/or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energizing power tools
that have the switch on invites accidents.
20V MAX BRUSHLESS RECIPROCATING SAW 1270-205

7
Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dustrelated hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power
tool accidentally.
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving parts,
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
result in a hazardous situation.
Hold power tool by insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring or its own cord. Contact with a
“live” wire will make exposed metal parts of the tool “live” and shock the operator.
Use clamps or another practical way to secure and support the workpiece to a
stable platform. Holding the work by hand or against your body leaves it unstable
and may lead to loss of control.
SERVICE
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.

8
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
Use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from metal objects like paper clips,
coins, keys, nails, screws, or other small metal objects that can make a connection
from one terminal to another. Shorting the battery terminals together may cause
burns or fire.
Under abusive conditions, liquids may be ejected from the battery; avoid contact.
If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
SPECIFIC SAFETY INSTRUCTIONS FOR
BRUSHLESS 20V VS RECIPROCATING SAW
Know your reciprocating saw. DO NOT plug in the charger or install the battery in
the tool until you have read and understand this Instruction Manual. Learn the tool’s
applications and limitations, as well as the specific potential hazards related to this
tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.
Always keep hands out of the path of the saw blade. Avoid awkward hand positions
where a sudden slip could cause your hand to move into the path of the saw blade.
WARNING: Know your reciprocating saw. Do not plug in the tool until you
have read and understand this Instruction Manual. Learn the tool’s applications
and limitations, as well as the specific potential hazards related to this tool.
Following this rule will reduce the risk of electric shock, fire, or serious injury.
Do not reach underneath the workpiece.
Always wear eye protection. Any power tool can throw foreign objects into
your eyes and cause permanent eye damage. ALWAYS wear safety goggles
(not glasses) that comply with ANSI safety standard Z87.1. Everyday glasses
have only impact resistant lenses. They ARE NOT safety glasses.
WARNING: Glasses or goggles not in compliance with ANSI Z87.1 could
cause serious injury when they break.
Hold the tool by its insulated gripping surfaces when performing an operation where
the saw blade may contact hidden wiring or its own cord. Contact with a “live” wire
will make exposed metal parts of the tool “live” and shock the operator.
Use clamps or another practical way to secure and support the workpiece to a
stable platform.
20V MAX BRUSHLESS RECIPROCATING SAW 1270-205

9
KNOW YOUR 20V MAX BRUSHLESS VS
RECOPROCATION SAW
Tool Free
Blade Release
Orbital
Setting Switch
Variable Speed
Trigger Switch Switch
Pivoting Shoe Tool less adjusting
shoe level
Battery
(sold separtely)

10
ASSEMBLY AND OPERATING
WARNING: Always use hearing protection when sawing, particularly during
extended periods of operation.
WARNING: Always remove the battery before changing the blade and when
making any adjustments.
INSTRUCTIONS
Hold power tool by insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring or its own cord. Contact with
a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
1. Always hold the tool with two hands. Attempting to control the tool with only
one hand is dangerous. It could result in loss of control and serious injury.
2. Never hold the workpiece in one hand and the tool the other hand when
sawing. Never place the hands near or below the cutting surface. Clamp the
workpiece and guide the tool with both hands.
3. Always make sure the work surface is free from nails and other foreign
objects. Cutting into a nail can cause the blade and the tool to jump and
damage the blade.
4. Never lay the workpiece on hard surfaces like concrete, stone etc. The protruding
blade may cause tool to jump.
5. After changing a blade or making adjustments, make sure the blade clamp is
holding the blade securely. Loose blades could be violently thrown from the tool.
6. Never use dull or damaged blades. Sharp blades must be handled with care.
Damaged blades can snap during use. Dull blades require more force to cut
the workpiece, possibly causing the blade to break.
7. Never touch the blade during or immediately after use. After use, the blade is
too hot to be touched.
IMPORTANT SAFETY INSTRUCTIONS
The warnings, precautions, and instructions discussed in this manual cannot cover
all possible conditions and situations that may occur. The operator must understand
that common sense and caution are factors which cannot be built into this product,
but must be supplied by the operator.
WARNING: Use only attachments recommended or sold by manufacturer.
1. DO NOT disassemble the saw. Take it to a qualified professional when service
or repair is required. Incorrect reassembly may result in electric shock or fire.
2. Wear approved safety eye/face shield, ear defenders and hand protection.
20V MAX BRUSHLESS RECIPROCATING SAW 1270-205

11
DISPOSAL
At the end of the useful life of the Tools by Benchmark 20V MAX* Li-ion
Reciprocating Saw, dispose of the components according to all state, federal
and local regulations.
PURPOSE
20V Max* Li-ion Reciprocating Saw is ideal for demolition and remodeling. Designed
to cut through many types of materials such as wood, metal, PVC and nails.
Always wear safety goggles and gloves.
WARNING: DO NOT immerse the battery pack in water. Sudden cooling
could cause a hot battery to explode or leak.
INSTALLING A BLADE
WARNING: Always remove the battery from the tool before installing
or removing a blade or adjusting the saw in any way.
1. To install a blade in the saw, rotate the blade locking sleeve (1) counter
clockwise (Fig. 1).
2. Insert the appropriate blade (2) into the blade slot (3) as far as it will go.
3. Release the blade locking sleeve.
NOTE: The blade will automatically be locked into the blade holder. Pull outward
on the blade to ensure it is properly locked into the blade holder.
REMOVING A BLADE
To remove a blade, simply rotate the blade locking sleeve counter clockwise and
FIG. 1
ADJUSTING THE PIVOTING SHOE
1. The pivoting shoe will pivot to follow the angle of the blade to the workpiece.
This action ensures the flat surface of the shoe is against the workpiece for better
cutting action and easier control of the saw.
remove the blade from the blade holder.
1 3 2

12
2.
points on the blade. This will provide longer blade life as one section of the blade
becomes dull.
3. To adjust the pivoting shoe, rotate the pivoting shoe adjusting lever to its
downward position.
4. Slide the pivoting shoe in or out until it is in the appropriate position.
5. Lock the pivoting shoe in place by rotating the pivoting shoe adjusting lever
upward to its original horizontal position.
LOCK-OUT SWITCH
1. The lock-out switch (1) is a safety device designed to reduce the possibility
of a user accidentally starting the saw. (Fig. 2)
2. This switch must be pressed before the trigger (2) switch can be squeezed.
NOTE: The lock-out switch can be pressed from either the left or right side of
the handle.
FIG. 2 FIG. 3
VARIABLE SPEED TRIGGER SWITCH
The trigger switch turns the reciprocating saw ON and OFF as well as controlling
the speed.
1. To turn the saw ON, press the lock-out switch with your thumb. (Fig. 2)
2. While holding the lock-out switch in the pressed position, squeeze the trigger
(2) switch to start the saw. (Fig. 3)
3. Once the saw starts, release the lock-out switch. The saw will remain running
until the trigger switch is released.
NOTE: The trigger switch also controls the speed at which the saw runs. The more
you squeeze the trigger, the faster the saw will run.
4. To turn the saw OFF, release the trigger switch.
NOTE: To re-start the saw, the lock-out switch must be pressed again before the
trigger switch is squeezed.
20V MAX BRUSHLESS RECIPROCATING SAW 1270-205
1 2 1 2

13
MATERIALS YOU CAN CUT
of materials. Some of these materials include:
• Wood products such as lumber, hardwood, plywood, composite board,
and paneling
ORBITAL ACTION
Orbital action describes the movement of the blade in the reciprocating saw. Most
basic saws use a straight stroke which means that the blade just moves straight in
and out of the saw. A straight stroke is good for certain types of cuts like scrolling
in wood or for cutting hard materials like steel. Orbital action, however, moves the
blade in a slightly circular motion as it moves in and out of the tool. This allows faster
cuts in softer materials and facilitates faster chip removal from the blade path.
WHEN TO USE ORBITAL ACTION
Orbital action is suitable for aggressive cuts in wood when a rough cut to remove
material quickly is called for. However, it’s not recommended for cutting metal,
or when making highly precise cuts where the blade has to be kept perfectly
perpendicular to the work surface.
SETTING ORBITAL ACTION
Turn switch to orbital setting to engage orbital action.
NOTE:
cutting blades (fine teeth) and wood cutting blades (coarse teeth). Use the correct
blade for your application. The packaging on the blade will indicate the type of
materials each blade is designed to cut.
GENERAL CUTTING
1. Clearly mark the workpiece to locate the position of the cut.
2. Hold smaller workpieces with a vice. Clamp larger workpieces to a workbench
or table.
WARNING: Any workpiece that is not adequately clamped in place may
come loose and cause serious injury. Never hold the workpiece with your hand.
3. Make sure there are no nails, screws, clamps or foreign materials in
4. Hold the saw away from your body and in front of you.
5. With both hands firmly gripping the saw, and with the blade NOT in contact with
the surface to be cut, start the saw by pressing the lock-out switch and squeezing
the trigger switch.
6. Once the saw has reached the desired speed, place the adjustable pivoting shoe
against the workpiece and gradually bring the moving blade into contact with the
workpiece at the appropriate location.

14
CAUTION: DO NOT force the saw. Use only enough force to keep the blade
cutting. Excessive pressure on the blade will cause it to bend and twist, which
may result in breaking the blade.
PLUNGE CUTTING
1. Clearly mark the workpiece to locate the position of the cut.
2. Clamp the workpiece to a workbench or table (Fig. 6).
NOTE: Make sure the area to be cut is clear under the workpiece so that the blade
will not come into contact with anything other than the workpiece.
3. Select a convenient starting point in the area to be cut out. Place the tip of the
blade over that point.
4. Rest the lower edge of the adjustable pivoting shoe on the workpiece and hold
it firmly in that position, maintaining a shallow cutting angle.
5. Press the lock-out switch and squeeze the trigger switch to start the saw.
WARNING: Make sure the blade does not touch the workpiece until the
saw reaches full speed. Loss of control and possible injury could result.
6. With the saw running at full speed, slowly tilt the saw until the tip of the blade
contacts the workpiece and begins to cut. After the blade cuts through the
workpiece, tilt the saw upward until the blade is perpendicular to the workpiece.
CUTTING WOOD
1. Clearly mark the workpiece to locate the position of the cut.
2. Hold smaller workpieces with a vice. Clamp larger workpieces to a workbench
or table.
DANGER: Any workpiece that is not adequately clamped in place may come
loose and cause serious injury. Never hold the workpiece with your hand.
3. Make sure there are no nails, screws, clamps or foreign materials in the path of
the saw blade.
4. Set the orbital control knob to either conventional or orbital cutting to produce
5. Hold the saw away from your body and infront of you (Fig. 5).
6. With both hands firmly gripping the saw,and with the blade NOT in contact with
the surface to be cut, start the saw by squeezing the switch trigger.
7. Once the saw has reached the desired speed, place the adjustable pivoting shoe
against the workpiece and gradually bring the moving blade into contact with the
workpiece at the appropriate location.
CAUTION: Do not force the saw. Use only enough force to keep the blade
cutting. Excessive pressure on the blade will cause it to bend and twist, which
may result in breaking the blade.
20V MAX BRUSHLESS RECIPROCATING SAW 1270-205

15
METAL CUTTING
1. Metals such as pipe, steel rods, sheet steel, aluminum, brass and copper can
be cut with your reciprocating saw.
2. To cut thin sheet material, “sandwich” the material between hardboard or
plywood and clamp the layers to limit vibration and material tearing.
3. Always use a fine toothed metal cutting blade and run the saw at medium speeds
when cutting metal.
4. 4- Use cutting oil to keep the blade cool, increase cutting DO NOT twist or bend
the saw blade.
5. DO NOT force the saw blade. Let it cut at its own speed.
WARNING: Always clamp the workpiece in a vice, or to a workbench or
table. DO NOT hold workpiece in your hand. Never use gasoline as a lubricant
or as a cleaning agent. A spark from the motor may cause an explosion.
Gasoline will also damage the plastic components of the saw.
4. Select a convenient starting point in the area to be cut out. Place the tip of the
blade over that point.
5. Rest the lower edge of the adjustable pivoting shoe on the workpiece and hold
it firmly in that position, maintaining a shallow cutting angle.
6. Squeeze the switch trigger to start the saw.

16
MAINTENANCE WARNING
When servicing, use only identical replacement parts. The use of any other part may
create a hazard or cause product damage.
DO NOT use solvents when cleaning plastic parts. Plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their
use. Use a clean cloth to remove dirt, dust, oil, grease, etc.
WARNING: DO NOT allow brake fluids, gasoline, petroleum-based
products, penetrating oils, etc. to come into contact with plastic parts.
They contain chemicals that can damage, weaken or destroy plastic.
DO NOT abuse power tools. Abusive practices can damage the tool and
the workpiece.
WARNING: DO NOT attempt to modify tools or create accessories.
Any such alteration or modification is misuse and could result in a hazardous
condition leading to possible serious injury. It will also void the warranty.
NOTE: It has been found that electric tools are subjected to accelerated wear
and possible premature failure when they are used on fiberglass boats and sports
cars, wallboard, spackling compounds or plaster. The chips and grindings from
these materials are highly abrasive to electric tool parts such as bearings, brushes,
commutators, etc. Consequently, it is not recommended that this tool be used
for extended work on any fiberglass material, wallboard, spackling compounds or
plaster. During any use on these materials, it is extremely important that the tool
is cleaned frequently by blowing it out with an air jet.
LUBRICATION
All of the bearings in this tool are lubricated with a sufficient amount of high-grade
lubricant for the life of the unit under normal conditions. Therefore, no further
lubrication is required.
20V MAX BRUSHLESS RECIPROCATING SAW 1270-205

17
EXPLODED VIEW

18
PARTS LIST
Always order by key number.
KEY # PART # PART NAME / QUANTITY KEY # PART # PART NAME / QUANTITY
11150010057
Modules Of Reciprocating Rod
33
22030020400 Gasket
33190010056 Wool Felt
43140020182 O-Ring
52010080159 Axle Sleeve
62040160227 Locating Pin 1
2040160238 Locating Pin 2
7
2030030321 Guide Rail
8
4110040017 Roller Pin
9
2030030322 Guide Rail
10
2050070072 Leaf Spring
11
2010210026 Idler Wheel
12
2040160229
Link Pin
13
2030030320 Link
14
4020010169 Screw
15
2020010038 Gear Box
16
4010020044 Needle Bearing
17
2040160228 Clump Weight Pin
18
2040210052 Clump Weight
19
4010020058 Needle Bearing
20
4110050010 Link Pin
2040160229 O-Ring T1.5
21
2040100005 Big Gear
22
2040050183 Principal Axis
23
2030020401 Cage Washer
24
3150160254 Cage
25
4080020001 Steel Ball
26
4020020024 Screw
27
2030160172 Bearing Pressure Plate
28
4010010043 Bearing
29
2020010038 Gear Box
30
2030020146 Non-Standard Gasket
31
4020010161 Screw
32
2040160190 Gear Column
3140060054 Shock pad
34
2050060230 Spring
35
3120060076 Knob Shaft Of Lifting Knife
36
2040160240 Inserts Of Cutter Lifting Knob
37
4100020010 Elastic Collar
38
4010010084
Deep Groove Ball Bearing
39
2040100004 Motor Gear
40
2030160171 Bearing Pressure Plate
41
4020010167 Screw
42
4030010130 Screw
43
3150050105 Guide Solar
44
3150010137 Fan Blade
45
1030300007 Rear Cowl
46
4010010034 Deep Groove Ball Bearing
47
3150190218 Motor Cover
48
4020010008 Screw
49
3010080023
Housing
50
2050060218
Spring
51
3120030148
Switch Lock Lever
52
1063050001
Switch Block
53
1130030079
Module Og Control Circuit Board
54
3150170020
Battery Lead Plate
55
3010080023
Housing
56
4030010074
Screw
57
4030010106
Screw
58
2040160226
Wrench Pin
59
2030100088
Bottom Bracket
60
1150020155
Bottom
61
2030160170
Base plate
62
2030020399
Lever insert
63
3120100064
Lever
64
1150020154
Base plate assembly
65
66
20V MAX BRUSHLESS RECIPROCATING SAW 1270-205

KEY # PART # PART NAME / QUANTITY KEY # PART # PART NAME / QUANTITY
67
68
69
4100020004 O-Ring
3160090133
Covers
3140080060 Rubber sleeve
19
WARRANTY
If this Benchmark tool fails due to a defect in material or workmanship within five
years from the date of purchase, return it to any Home Hardware store with the
original bill of sale for exchange. 3-year warranty for the battery and charger. This
warranty does not include expendable parts including but not limited to blades,
brushes, belts, light bulbs.
This warranty covers defects in material or workmanship only. It does not cover
normal wear and tear, failure due to abuse/misuse, or defects caused by careless
or accidental mishandling. If this Benchmark product is used for commercial or
rental purposes, this warranty does not apply.