Benchmark 1347-006 User manual

216045
JF930511L

1
Call us on our toll- free customer support line:
1-866-349-8665 (Monday through Friday 9am –5pm
Eastern Standard Time)
Technical questions
Replacement parts
Parts missing from package

2
`

3
•
•
•

4
`
WORK AREA SAFETY
Keep guards in place and in working order.
Remove adjusting keys and wrenches. Form habit of checking to see that keys and adjusting wrenches are removed
from tool before turning it on.
Keep work area clean. Cluttered areas and benches invite injuries.
Don’t use in dangerous environments. Don’t use power tools in damp or wet locations, or expose them to rain or
snow. Keep work area well lighted.
Keep children away. All visitors should be kept at a safe distance from work area.
Make workshop childproof with padlocks, master switches, or by removing starter keys.
Don’t force the tool. It will do the job better and safer at the rate for which it was designed.
Use the right tool. Don’t force tool or attachment to do a job for which it was not designed.
Wear proper apparel. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewellery which may get
caught in moving parts. Non-slip footwear is recommended. Wear protective hair covering to contain long hair.
Always use safety glasses. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses only have
impact-resistant lenses, they are not safety glasses.
Secure work. Use clamps or vise to hold work when practical. It’s safer than using your hand and it frees both hands
to operate tool.
Don’t overeach. Keep proper footing and balance at all times.
Maintain tools with care. Keep tools sharp and clean for best and safest performance. Follow instructions for
lubricating and changing accessories.
Disconnect tools before servicing; when changing accessories, such as blades, clamps, extensions, and the like.
Reduce the risk of unintentional starting. Make sure the switch is in the OFF position before plugging in.
Use recommended accessories. Consult the owner’s manual for recommended accessories. The use of improper
accessories may cause risk of injury to persons.
Never stand on tool. Serious injury could occur if something unintentionally comes into contact with the cutting tool.
Check damaged parts. Before further use of the tool, a guard or other part that is damaged should be carefully
checked to determine whether it will operate properly and perform its intended function - check for alignment of
moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its
operation. A guard or other part that is damaged should be properly repaired or replaced.
Direction of feed. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.
Never leave tool running unattended. Turn power off. Don’t leave tool until it comes to a complete stop.

5

6
`
'
28. Never lift this tool by gripping the switch handle or by the mitre fence. This may cause misalignment. Always lock the head
assembly in the “Down” position and carry the saw by holding the base or lift it using the carrying handle/support bracket.

7

8
`
•
•
•
•
•

9
•
•
•
ot
•ff ／

10
`

11
1/4
1/4
1/2

12
`

13

14
`

15

16
`

17

18
`
•
•
•

19