MK MK-1280 User manual

www.mkdiamond.com
Caution: Read all safety and operating instructions
before using this equipment. This owners manual
MUST accompany the equipment at all times.
MK-1280 ELECTRIC SERIES
BRICK/PAVER SAW
OWNERS MANUAL &
PART LIST
10.2010
Revision 100
Manual Part No. 168786

30
MK-1280 ELECTRIC SAW EXPLODED VIEW
FIGURE 1 - MK-1280 PAVER SAW - P/N 167492

31
ITEM DESCRIPTION PART# QTY
1NUT, 3/8 16 HEX 101188 7
2NUT, HEX, 5/16 - 18 101196 8
3WRENCH, 3/4 BOX END 134056 1
4KEY, 3/16 SQ X 1-1/8 150344 1
5SCREW, 3/8 - 16 X 1 - 1/4 HEX HEAD CAP 150774 3
6HOSE, WATER VINYL 3/8 X 1/2, 30” 150845_18 1
7WASHER, 3/8 SAE FLAT 150923 13
8WASHER, 3/8 SPLIT LOCK 150925 11
9SCREW, THUMB 5/16 - 18 X 1 - 1/2 151155 1
10 NUT, SQUARE 5/16 - 18 151156 1
11 FITTING, 1/2 MNPT X 3/4 FNH 151322 1
12 SCREW, HEX HD, 5/16 - 18 X 1 151743 4
13 WASHER, LOCK, SPLIT, 5/16 151747 4
14 WASHER, FLAT, SAE, 5/16 151754 8
15 WASHER, 1/4 SAE, FLAT 151915 4
16 SCREW, HEX HD, 1/4 - 20 X 3/4 152370 2
17 SCREW, HEX HD CAP, 3//8 -16 X 1 152507 2
18 WASHER, 1/4 SPLIT LOCK 152591 2
19 NUT, LOCK STEEL 1/2” NPT 152729 1
20 SCREW, HEX, 3/8 -16 X 3/4 153527 1
21 SCREW, 3/8 - 16 X 2 - 1/4 HEX HEAD 153529 1
22 FITTING, 1/2 MNPT X 3/8 BARB 153653 1
23 SCREW, 1/4 - 20 X 1/2 TRUSS HEAD 153880 7
24 NUT, HEX W/WSHR, 1/4 - 20 153941 4
25 SCREW, HEX, 5/16 - 18 X 2 - 1/4 153951 4
26 BOLT, HEX HEAD TAP, 3/8 - 16 X 3 155830 1
27 SCREW, HEX HD CAP, 3/8 - 16 X 2 - 3/4 156774 2
28 BELT, 10K430 156837 1
29 SCREW, 5/16 - 18 X 3/8 SOCKET HEAD SET 157084 2
30 WASHER, SQR, 7/16 X 1 - 1/4 X 3/16 157567 3
31 BLADE, MK-414PBSL 16 X 125 X 1 160765 1
32 BELT GUARD, OUTER, ARBOR, COMP 160888 1
33 PULLEY, 10J28 X 5/8 BORE 160949 1
34 FITTING, 1/2 NPT COUPLER 164208 1
35 MASONRY LABEL SHEET (NOT SHOWN) 166011 1
36 FRAME, MAIN MK-1280 166555 1
37 BACKSPLASH, MK-1280 166576 1
38 ASSY, TABLE, MK-1280 166577 1
39 ASSY, BLADE GUARD, 16”, MK-1280 166581 1
40 GUIDE, TENSION 167750 1
41 BRACKET, BELT GUARD 167763 1
42 CAP, VACUUM 167777 1
MK-1280 ELECTRIC SAW PARTS LIST

32
MK-1280 ELECTRIC SAW EXPLODED VIEW
FIGURE 2 - MK-1280 PAVER SAW - P/N 166561

33
FIGURE 2 - MK-1280 PAVER SAW - P/N 166561
MK-1280 ELECTRIC SAW PARTS LIST
ITEM DESCRIPTION PART# QTY
43 OWNERS MANUAL, MK-1280 168786 1
44 ASSY, ARBOR, ELEC 1280 168712 1
45 GUARD, BELT, INNER 168713 1
46 MOUNT, MOTOR, ELEC 1280 168714 1
47 MTR, 2HP 115/230V 60 HZ 231095 1
48 CASTING, SQUARING ARM-COMP 231276 1

34
MK-1280 ELECTRIC SAW PARTS LIST
ITEM DESCRIPTION PART# QTY
1WHEEL, CONVEYOR CART 133090 4
2SCREW, HEX HD, 1/4 - 20 X 3/4 152370 4
3NUT, HEX W/WSHR, 1/4 - 20 153941 4
4NUT, HEX, TW, 5/16 - 18 153942 4
5WOOD STRIP, TABLE INSERT 158283 1
6SCREW, DRYWL, FLAT HD, #6X1 159906 2
7CASTING, TABLE, MK-1280 165398 1
8BACKSTOP, TABLE 166584 1
FIGURE 3 - ASSY, TABLE - P/N 166577

35
MK-1280 ELECTRIC SAW PARTS LIST
ITEM DESCRIPTION PART# QTY
1KEY, 3/16 SQ X 1 - 1/8 150344 1
2BEARING, ARBOR HOUSING 154594 2
3CASTING, 2000/5000 ARBPR - COMP 154637 1
4SCREW, 5/16 - 18 X 3/8 SOCKET HEAD SET 157084 2
5PULLEY, 10J28 X 5/8 BORE 157466 1
6SCREW, 1/2 - 13 X 1-1/12 HEX HEAD, LEFT HAND 160818 1
7FLANGE, OUTER, MASONRY, 4” 161304 1
8FLANGE, INNER, MASONRY, 4” 161305 1
9SHAFT, BLADE 166586 1
FIGURE 4 - ASSY, ARBOR - P/N 166579

36
MK-1280 ELECTRIC SAW PARTS LIST
ITEM DESCRIPTION PART# QTY
1ELBOW, 1/4 MNPT STREET 154615 1
2FITTING, 1/4 MNPT X 3/8 BARB 154659 1
3SCREW, HEX HEAD 3/8 - 16 X 1 - 1/2 LG. 156656 2
4CASTING, BLADE GUARD, 16” - COMP 166558 1
5VALVE, BALL, 1/4”M TO 1/4”F 231248 1
FIGURE 5 - ASSY, 16” BLADE GUARD - P/N 166581

37
MK-1280 ELECTRIC SAW PARTS LIST
FIGURE 6 - ASSY, CART - P/N 167437
ITEM DESCRIPTION PART# QTY
1NUT, 3/8 - 16 HEX 101188 18
2WASHER, FLAT, USS, 3/8 101360 36
3WASHER, 3/8 SPLIT LOCK 150925 16
4NUT, 3/8 - 16 NYLOK HEX 152505 3
5SCREW, 3/8 - 16 X 2-1/4 HEX HEAD 153529 1
6KNOB, ADJ MK1408 5-PRONG -RAW 155239 2
7GRIP, HANDLE 7/8 ID 158608 1
8CASTER, 10” RIGID 167772 2
9CASTER, 10’ SWIVEL 167773 2
10 HANDLE, CART 167774 1
11 BOLT, HOOK, 38 - 16 X 5 167775 2
12 FRAME, CART 167776 1

38
NOTES

39
MK-1280 ELECTRIC SAW ORDERING & RETURN INSTRUCTIONS
ORDERING INFORMATION
You may order MK Diamond products through your local MK Diamond distributor or, you may order
direct from MK Diamond.
NOTE: There is a $25.00 minimum order when ordering direct from MK Diamond. All purchases
must be made using VISA, MasterCard or American Express.
When ordering direct from MK Diamond, please have the following information ready before calling:
• The Model Number of the saw
• The Serial Number of the saw
• Where the saw was purchased and when
• The Part Number for the part(s) being ordered
• The Part Description for the part(s) being ordered
All parts may be ordered by calling toll free to – 800 421-5830 or 310 539-5221 and asking for
Customer Service. For technical questions, call – 800 474-5594.
RETURN MATERIALS POLICY
To expedite the service relative to the return of a product purchased through MK Diamond, please
observe the following:
NOTE: When returning all items, they must have been purchased within the previous twelve (12)
months.
• Have the Model Number of the saw
• Have the Serial Number of the saw
• Have the location of where the saw was purchased
• Have the date when the saw was purchased
• Contact Customer Service for approval to return the item(s)
• Obtain a Returned Goods Number (RGA) authorizing the return
• Follow the packaging instructions in the following section
• Ensure your item(s) are prepaid to the destination
For returned items, call toll free to – 800 421-5830 or 310 539-5221 and ask for Customer Service.
For technical questions, call – 800 474-5594 or 310 257-2845.
PACKAGING INSTRUCTIONS
• Remove the Cutting Head and Support Angle Assembly
• Dry the saw before shipping
• When packing, include the following: MK-1280, Diamond Blade, Blade Guard and Support Angle
Assembly and Adjustable Cutting Guide (Other Accessories are not required)
• Package the unit in its original container or one of comparable size (do not ship the unit partially
exposed)
• Ensure all parts are secured in the packaging to prevent moving
AUTHORIZED SERVICE CENTERS
For quicker repair time, you may contact MK Diamond Customer Service, toll free, at 800 421-5830
or 310 539-5221 for the Authorized Service Center closest too you or visit our web site at www.mkdia-
mond.com. For technical questions, call – 800 474-5594.

MK Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
Toll-Free: [phone]
Phone: [phone]
Fax: [phone]
www.mkdiamond.com
MK-1280 ELECTRIC SAW SERIES
OWNERS MANUAL & PART LIST