BenQ S30 User manual

Document Camera
S30
User Manual
用户手册
使用手冊
Guide utilisateur
ユーザーマニュアル
  

1
Warning
1. Do not look directly at the LED light source, which may cause retinal damage.
2. Carry the product by holding the base of the main unit in both hands. Never hold the product by
the arm or the camera head only.
3. The camera can be damaged if it hits a desk surface or any hard object.
4. Never turn the arm in the opposite direction.
5. Be sure to keep one hand on the
device base when adjusting the arm
and camera head.

2
Packge Content
S30 x 1
Accessory Box x 2
Box1
Box2
VGA cable x1
USB cable (type B to type A ) x1
Remote control
Batteries for remote control (AAA) x2
Power adapter
Microscope adapter
Anti-glare sheet
Quick Guide
CD

3
Preparing the Document Camera
Knowing the Document Camera Parts
Gooseneck Arm
LED Lamp
Camera Head
DC 5V Power Socket
VGA Output Port
VGA Input Port
Remote Control Signal Receiver 1
Antitheft Slot
Remote Control Signal Receiver 2
Control Panel
SD Card Slot
USB Port
Speaker
Microphone

4
Control Panel
Button Function
Power on/off
Capture a still image
Record a video and audio clip
Freeze the current image
*Pause the clip while playing video
Macro/Normal Switch
Show Menu and select
Direction button
Zoom out
Zoom in
Button Function
One-time auto focus
Invert image 180°
Delete les from memory when in
playback mode
QBOX- Highlight function
Turn on/off and adjusting the
brightness of the LED lamp
Enter DC mode (Preview)
Enter Playback mode to see
recorded video clips and images.
Enter PC mode to do the
“PASSTHROUGH” function.

5
Remote Control
Button Function
DC/PC mode switch
Power on/off
Zoom out
One shot auto focus
Zoom in
Enter playback mode to display
recorded video clips and images
Capture a still image
Direction key
Show menu and select
Invert image 180°
Freeze current image
*Pause the video clip while playing
videos
QBox-Highlight function
Qmask- Mask function
Picture in picture function on/off
*For displaying a still image as an
insert while displaying another image
Record a video clip
Brightness hotkey
Zoom reset to 1X
Use the level bar to adjust the focus
manually
Delete les from memory when in
playback mode
Infrared remote control can only be used
in proximity to the unit.
Remove the battery cover and load the
batteries into the battery compartment
correctly according to the “+” and “-”
symbols.
Be sure to use two AAA batteries. Do
not use new and old batteries or differ-
ent battery types together.

6
Setting Up
This section provides useful tips on how to adjust the document camera smoothly for your needs.
Camera Head
The camera head can turn freely up and down.
Illumination Lamp
If you are in a dark environment, please turn the
LED lamp on to make better exposure.
1. Press the LED lamp button ( ) on the base to
turn on/off the LED lamp.
2. Adjusting the brightness by pressing the lamp
button ( ).
Gooseneck Arm
The gooseneck arm can be adjusted to support various working areas.

7
Working Area
󰁈working area
If the document is not put in the
recommend working area, the image
should be rotated
by FLIP button ( ) on control
panel or remote control.
11.7”
8.3”
Height 15.4”
for Max. area
(11.7” x 8.3”)
Minimum height 5.9”

8
Adjusting the brightness
1. Press BRIGHTNESS button on remote control ( ).
2. Use ( or ) buttons to increase or decrease the brightness level.
Zoom Function
Use the Zoom button ( / ) to zoom in or zoom out the screen.

9
Adjusting the Focus
󰁈Automatic Focus
Press AF button ( ) to automatically focus. This function provides a one-time auto-focus.
󰁈Manual Focus
Use the manual focus button ( / )
󰘰
Anti-glare
Anti-glare sheet is a transparent plastic that is overlaid on top of shiny object or glossy surface to
reduce the glare.
To use, simply place the anti-glare sheet on top of shiny object to glossy surface such as magazine
to reduce light reection.
+ Anti-glare