BenQ SW271C User manual

Recycle Disassemble Instruction
(Dismantled Information)
Requirements according to ANNEX VII of DIRECTIVE 2012/19/EU
on waste electrical and electronic equipment (WEEE)
Materials and components with hazardous content
LCDs may contain hazardous substances like Pb and BFRs which are covered by
exemptions under the RoHS directive. However, the majority is present in the printed
circuit boards assembly. In order to reduce emissions as much as possible, a complete
disposal of the old appliance is required. This treatment may only be performed in
authorized handling plants.
Product Name:
LCD Monitor
Model No.: SW271C

Disassembly Tools
Tool picture
Philips Screwdriver for M3 Screw
Nosed Pliers
Diagonal Cutting Pliers
Slotted screwdriver
Six Point Sockets
Philips Screwdriver for M2.5 Screw
Knife

Disassembly process
1. Disassemble process
1.1 Disassembly of the monitor head.
1.2 Disassemble the stand from the head.
1.3 Remove the mylar from the head.

1.4 Remove the screws from the RC.

1.5 Disassemble the RC from the FC.
1.6 Remove the tapes and mylars from the SHD and PNL.

1.7 Remove the mylar and the tape from the PNL and the SHD.
1.8 Take the conductive tape away from the PNL.
1.9 Unscrew the screws from the SHD.

1.10 Take the PCABs out of the SHD.
1.11 Remove the sponge and the screws from the FC.
1.12 Uninstall the CTRL BD from the FC.

Disassembly of the stand
1. Disassemble Column
a. Remove VESA plate& VESA cover by loosing screws.
b. Remove hinge cover front by loosing screws.
c. Remove column cover by hand.

d. Remove slider from column housing by loosing screws.
e. Remove spring by loosing screw.
f. Remove Lift BKT by loosing screw.

g. Remove ASSY Rail by loosing screws.
h. Remove ASSY Swivel by loosing screws.
i. Remove Ring cover by knife.

Disassemble Base
Remove base cover by loosing screw and knife.

Disassembly of the hood
1. Use the knife to remove the cloth and sponges from the hood side R.
.
2. Use the knife to remove the cloth and sponges from the hood side L.
3. Use the knife to remove the cloth and sponges from the hood extend R.

4. Use the knife to remove the clothe and sponges from the hood extend L.
5. Remove the cloth and sponges from the hood top R by knife.
6. Remove the cloth and sponges from the hood top L by knife.

7. Use the knife to remove the cloths from the hood brige H bkt and window.
8. Use the knife to remove the cloths from the hood brige V bkt and window.
Disassembly Time
Total time: 30 minutes