BenQ W1600UST User manual

Digital Projector
Quick Start Guide

a
D
V
M
W
h
X
Dimensions Unit: mm
385.5
429.2
152.6
126.6
152.6
429.2
All measurements are approximate and may vary from the actual sizes.
BenQ recommends that if you intend to permanently install the projector, you should physically test the
projection size and distance using the actual projector in situ before you permanently install it, so as to make
allowance for this projector's optical characteristics. This will help you determine the exact mounting position
so that it best suits your installation location.
Projection dimensions

1ON 2
3
4
5
2
1

1. Choosing a location
Front Table Rear Table
2. Using the test pattern
3. Correcting the image
Positioning your projector
Using the quick install

OFF
1
2
3
X 2

Projector specifications
All specifications are subject to change without notice.
Optical
Resolution
1920 (H) x 1080 (V)
Display system
1-CHIP DMD
Lens
F = 2.4, f = 3.35 mm
Lamp
240 W lamp
Electrical
Power supply
AC100–240V, 3.9 A, 50–60 Hz
(Automatic)
Power consumption
410 W (Max); < 0.5 W (Standby)
Mechanical
Weight
6.1 Kg (13.4 lbs)
Output terminals
Speaker
(Stereo) 10 watt x 2
Audio signal output
Audio jack x 1
Control
USB
Type Mini-B x 1 (Service download)
RS-232 serial control
9 pin x 1
IR receiver x 1
Input terminals
Computer input
RGB input
D-Sub 15-pin (female) x 2
Video signal input
VIDEO
RCA jack x 1
SD/HDTV signal input
Analog - Component RCA jack x 3
(through RGB input)
Digital - HDMI x 1; HDMI/MHL x 1
Audio signal input
Audio in
RCA audio jack (L/R) x 2
PC audio jack x 2
Environmental Requirements
Operating temperature
0°C–40°C at sea level
Storage temperature
-20°C–60°C at sea level
Operating/Storage relative humidity
10%–90% (without condensation)
Operating altitude
0–1499 m at 0°C–35°C
1500–3000 m at 0°C–30°C (with
High Altitude Mode on)

For further information, please refer to the enclosed User Manual.